Sub-10-nm Wide Trench, Line, and Hole Fabrication Using Pressed Self-Perfection
Source abstract
Abstract
We report a new approach to adjust and improve nanostructures after their initial fabrication, which can reduce the trench width and hole diameter to sub-10 nm, while smoothing edge roughness and perfecting pattern shapes. In this method, termed pressed self-perfection by liquefaction (P-SPEL), a flat guiding plate is pressed on top of the structures (which are soften or molten transiently) on a substrate to reduce their height and guide the flow of the materials into the desired geometry before hardening. P-SPEL results in smaller spacing between two structures or smaller holes in a thin film.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nanofabrication and Lithography Techniques · Advanced Surface Polishing Techniques · Advancements in Photolithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
NanoStructure Laboratory, Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544
References (8)
Show source-provided references
1. Chou S. Y. · Nat. Nanotechnol. · 2008 · 3 · 29510.1038/nnano.2008.95 ↗
2. Chou S. Y. · Nature · 2002 · 417 · 83510.1038/nature00792 ↗
3. Chan M. · J. Vacuum Sci. Technol. B · 1997 · 15 · 240410.1116/1.589656 ↗
4. Groves T. R. · Microelectron. Eng. · 2002 · 28510.1016/S0167-9317(02)00528-2 ↗
5. Marrian C. R. K. · J. Vac. Sci. Technol. A · 2003 · 21 · S20710.1116/1.1600446 ↗
6. Pease R. F. · Proc. IEEE · 2008 · 96 · 24810.1109/JPROC.2007.911853 ↗
7. Gao H. · Nano Lett. · 2006 · 6 · 243810.1021/nl0615118 ↗
8. Constantoudis V. · J. Vac. Sci. Technol. B · 2003 · 21 · 101910.1116/1.1570844 ↗