Multi-Stimulus Soft Actuators from Aerosol Jet Printed MXene-Cellulose Composite
Source abstract
Abstract
The evolution of next-generation flexible, stretchable, and conformal microrobotics hinges significantly on advances in fabrication methods. There is a need to enhance the scalability of actuator feature dimensions and to increase the design versatility. This study demonstrates the additive manufacturing of soft multi-stimulus thermomechanical actuators based on a composite of transition metal carbide (TMC, MXene) and cellulose nanofiber (CNF) nanomaterials using aerosol jet printing (AJP) for scalable/customizable actuation. Aqueous MXene-CNF films with tunable electrothermal and photothermal properties were printed onto polycarbonate (PC) membranes for wired and/or wireless operation, having full reversibility with induced heating below 120 °C. Printed devices as small as 5 mm 2 and 2.5 mm 2 yielded sharp curvatures of 0.92 cm –1 and 0.87 cm –1, respectively. By printing MXene-CNF to select regions on both sides of the substrate, complex actuation modes were realized with directional, reversible control. This work highlights the promise of AJP-fabricated MXene-CNF systems for soft robotics applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Advanced Materials and Mechanics · Micro and Nano Robotics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Electrical & Computer Engineering
Duke University
Department of Electrical Engineering
Arizona State University
Department of Biomedical Engineering
Department of Biology
Forest Products Laboratory
Department of Chemistry
Funding
National Heart, Lung, and Blood Institute · Division of Electrical, Communications and Cyber Systems · Forest Products Laboratory
References (51)
Show source-provided references
1. 10.1039/D1MA00885D10.1039/D1MA00885D ↗
2. 10.1089/soro.2021.008010.1089/soro.2021.0080 ↗
3. 10.3390/polym1618266010.3390/polym16182660 ↗
4. 10.1002/ange.20150710810.1002/ange.201507108 ↗
5. 10.1021/acs.nanolett.9b0314710.1021/acs.nanolett.9b03147 ↗
6. Nakahara, K.; Narumi, K.; Niiyama, R.; Kawahara, Y. In 2017 IEEE International Conference on Robotics and Automation (ICRA) ; pp 1856–1863 (IEEE).10.1109/ICRA.2017.7989217 ↗
7. 10.1089/soro.2015.002210.1089/soro.2015.0022 ↗
8. 10.1089/soro.2013.000510.1089/soro.2013.0005 ↗
9. 10.1177/027836491349843210.1177/0278364913498432 ↗
10. 10.1002/adfm.20211250810.1002/adfm.202112508 ↗
11. 10.1109/TIE.2020.297872810.1109/TIE.2020.2978728 ↗
12. Greer, J. D.; Blumenschein, L. H.; Okamura, A. M.; Hawkes, E. W. In 2018 IEEE International Conference on Robotics and Automation (ICRA) ; pp 4165–4172 (IEEE).10.1109/ICRA.2018.8460777 ↗
13. 10.1126/scirobotics.abn415510.1126/scirobotics.abn4155 ↗
14. 10.1126/scirobotics.aar798610.1126/scirobotics.aar7986 ↗
15. 10.1038/nnano.2015.26010.1038/nnano.2015.260 ↗
16. 10.1002/adhm.20140064710.1002/adhm.201400647 ↗
17. 10.1126/sciadv.aaw795610.1126/sciadv.aaw7956 ↗
18. 10.1002/admi.20210194810.1002/admi.202101948 ↗
19. 10.1002/smtd.20230007710.1002/smtd.202300077 ↗
20. 10.1038/nmat456910.1038/nmat4569 ↗
21. 10.1007/s40820-025-01762-910.1007/s40820-025-01762-9 ↗
22. 10.1016/j.matt.2025.10226410.1016/j.matt.2025.102264 ↗
23. 10.1039/C7RA13384G10.1039/C7RA13384G ↗
24. 10.1021/acsnano.6b0412510.1021/acsnano.6b04125 ↗
25. 10.1039/D1MH00623A10.1039/D1MH00623A ↗
26. 10.1088/0957-4484/28/2/02550210.1088/0957-4484/28/2/025502 ↗
27. 10.1126/sciadv.160032710.1126/sciadv.1600327 ↗
28. MacCurdy, R.; Katzschmann, R.; Kim, Y.; Rus, D. In 2016 IEEE International Conference on Robotics and Automation (ICRA) ; pp 3878–3885 (IEEE).10.1109/ICRA.2016.7487576 ↗
29. Stiltner, L. J.; Elliott, A. M.; Williams, C. B. A method for creating actuated joints via fiber embedding in a polyjet 3D printing process. In ; University of Texas at Austin (2011) 10.26153/tsw/15319.10.26153/tsw/15319 ↗
30. Wilkinson, N. J.; Lukic-Mann, M.; Shuttleworth, M. P.; Kay, R. W.; Harris, R. In 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft) ; pp 496–501 (IEEE).10.1109/ROBOSOFT.2019.8722766 ↗
31. 10.1002/adem.20230127510.1002/adem.202301275 ↗
32. 10.1039/D4SM00886C10.1039/D4SM00886C ↗
33. 10.1002/admt.20200014810.1002/admt.202000148 ↗
34. 10.1039/C9NR03378E10.1039/C9NR03378E ↗
35. 10.1038/s41378-023-00606-z10.1038/s41378-023-00606-z ↗
36. 10.1021/acsnano.9b0433710.1021/acsnano.9b04337 ↗
37. 10.3390/polym1608114410.3390/polym16081144 ↗
38. 10.1002/mame.20220007210.1002/mame.202200072 ↗
39. 10.1016/j.carbon.2022.10.07210.1016/j.carbon.2022.10.072 ↗
40. 10.1088/2058-8585/aace2810.1088/2058-8585/aace28 ↗
41. 10.1088/2058-8585/ace3d810.1088/2058-8585/ace3d8 ↗
42. 10.7567/JJAP.50.01AH0510.7567/JJAP.50.01AH05 ↗
43. 10.1002/aic.1502710.1002/aic.15027 ↗
44. 10.1021/acsomega.3c0800310.1021/acsomega.3c08003 ↗
45. Navratil, J.; Hamacek, A.; Reboun, J.; Soukup, R. In 2015 38th International Spring Seminar on Electronics Technology (ISSE) ; pp 36–39 (IEEE).10.1109/ISSE.2015.7247957 ↗
46. 10.1016/j.xcrp.2023.10158810.1016/j.xcrp.2023.101588 ↗
47. 10.1126/sciadv.adf801410.1126/sciadv.adf8014 ↗
48. 10.1016/j.memsci.2019.11735010.1016/j.memsci.2019.117350 ↗
49. 10.1002/adfm.20240045910.1002/adfm.202400459 ↗
50. 10.1002/polb.2358310.1002/polb.23583 ↗
51. 10.1016/j.carbpol.2023.12113210.1016/j.carbpol.2023.121132 ↗