Source abstract
Abstract
Anisotropic two-dimensional layered materials with low-symmetry lattices have attracted increasing attention due to their unique orientation-dependent mechanical properties. Black arsenic (b-As), with the puckered structure, exhibits extreme in-plane anisotropy in optical, electrical, and thermal properties. However, experimental research on mechanical properties of b-As is very rare, although theoretical calculations predicted the exotic elastic properties of b-As, such as the anisotropic Young’s modulus and negative Poisson’s ratio. Herein, experimental observations on highly anisotropic elastic properties of b-As were demonstrated using our developed in situ tensile straining setup based on the effective microelectromechanical system. The cyclic and repeatable load–displacement curves proved that Young’s modulus along the zigzag direction was ∼1.6 times greater than that along the armchair direction, while the anisotropic ratio of ultimate strain reached ∼2.5, attributed to the hinge structure in the armchair direction. This study could provide significant insights into the design of novel anisotropic materials and explore their potential applications in nanomechanics and nanodevices.
Source: openalex_inverted_index · Quality: baseline
Affiliations
Advanced Research Institute of Multidisciplinary Sciences (ARIMS), Beijing Institute of Technology, Beijing 100081, P. R. China
School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, P. R. China
School of Physics and State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, P. R. China
BIT Chongqing Institute of Microelectronics and Microsystems, Chongqing 400030, P. R. China
Funding
State Key Laboratory of Powder Metallurgy · Key Programme · National MCF Energy R&D Program · 173 JCJQ program