journal article·2020-04-08

Dielectric Barrier Discharge Applicator for Heating Carbon Nanotube-Loaded Interfaces and Enhancing 3D-Printed Bond Strength

C. B. Sweeney, Matthew L. Burnette, Martin J. Pospisil, Smit A. Shah, Muhammad Anas, Blake R. Teipel, Bryan S. Zahner, David Staack, Micah J. Green

Nano Letters· Volume 20· Issue 4
Publisher page

Abstract

Material extrusion (ME) 3D printing is a revolutionary technique for manufacturing thermoplastic parts; however, the printed parts typically suffer from poor interlayer bonding, which causes weak tensile strength in the build direction. Many methods have been proposed to address the mechanical deficiencies of 3D-printed parts, but most fall short of a production-ready solution. Here we report the use of a dielectric barrier discharge (DBD) plasma electrode mounted concentrically around the nozzle of an ME 3D printer for in situ welding of thermoplastic parts. This is the first report of a DBD being used as a non-contact means to induce Joule heating in resistive composite materials. The polymer welding process is accomplished by coupling the DBD with the carbon nanotube-loaded interfaces between the 3D-printed layers. The current passing through the part results in rapid resistive heating of the nanotubes and thermal welding of the interfaces. We show that parts printed with this method have isotropic strength and are equivalent to their injection-molded counterparts.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Additive Manufacturing and 3D Printing Technologies · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Essentium 3D, 19025 Heatherwilde Boulevard, Pflugerville, Texas 78660, United States

Department of Materials Science and Engineering, Texas A&M University, College Station, Texas 77843, United States

Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, Texas 77843, United States

Department of Mechanical Engineering, Texas A&M University, College Station, Texas 77843, United States

Funding

Division of Civil, Mechanical and Manufacturing Innovation

References (19)

Show source-provided references
1. 10.1002/andp.1857178090510.1002/andp.18571780905 ↗
2. 10.1351/pac19997110181910.1351/pac199971101819 ↗
3. 10.1146/annurev-fluid-121108-14555010.1146/annurev-fluid-121108-145550 ↗
4. Wilkinson, S. P.; Siochi, E.; Sauti, G.; Xu, T.B.; Meador, M.; Guo, H. Evaluation of Dielectric-Barrier-Discharge Actuator Substrate Materials. In 45th AIAA Plasmadynamics and Lasers Conference; AIAA AVIATION Forum: Atlanta, GA, 2014.10.2514/6.2014-2810 ↗
5. 10.1088/0022-3727/42/12/12520210.1088/0022-3727/42/12/125202 ↗
6. 10.1002/adfm.20060101110.1002/adfm.200601011 ↗
7. 10.1002/app.3683210.1002/app.36832 ↗
8. 10.1021/acsami.5b0648410.1021/acsami.5b06484 ↗
9. 10.1126/sciadv.170026210.1126/sciadv.1700262 ↗
10. 10.1021/acsami.8b0626810.1021/acsami.8b06268 ↗
11. 10.1016/S0042-207X(02)00765-010.1016/S0042-207X(02)00765-0 ↗
12. 10.1109/TPS.2002.80420110.1109/TPS.2002.804201 ↗
13. 10.1515/chem-2015-006710.1515/chem-2015-0067 ↗
14. 10.1063/1.151318510.1063/1.1513185 ↗
15. 10.1016/j.ijadhadh.2003.09.00610.1016/j.ijadhadh.2003.09.006 ↗
16. 10.1016/j.procir.2016.02.31410.1016/j.procir.2016.02.314 ↗
17. 10.1016/j.addma.2018.11.00510.1016/j.addma.2018.11.005 ↗
18. Seppala J. E. · Proc. SPE ANTEC
19. 10.1039/C7SM00950J10.1039/C7SM00950J ↗