Low Voltage ED-X-ray Microanalysis of Bulk Organic Materials

Abstract An earlier investigation had shown that it is possible to perform quantitative energy dispersive x-ray microanalysis at primary beam voltages as low as 5kV on bulk biological material maintained in either the fully frozen hydrated or the dried state. This present study extends the earlier work and provides data which shows that the same type of analysis can be achieved at voltages as low as 3kV on organic samples composed primarily of hydrogen, carbon and oxygen which contain varying amounts of bromine, sulphur and chlorine. Such materials are equally beam sensitive as fully frozen hydrated biological samples and range in density from 1.1 to 2.2kg.m3. The samples fall into three main classes. 1. Chlorinated and/or sulphonated organic polymers. 2. A brominated organic sample. 3. Three experimental brominated plastics kindly supplied by Ms. B.S.Chuah, Melville Laboratory for Polymer Synthesis, Cambridge University. The remaining samples were purchased from Aldrich Chemicals at the highest purity available. The atomic weight percent and density was calculated for each of the eight specimens using the Electron Flight Simulation™ software programme.