The Impact of Charging on Low-Energy Electron Beam Lithography
Source abstract
Abstract
A major issue in low voltage lithography is surface charging, which results in beam deflection presented as uneven exposure between adjacent structures. In this study, charge-induced pattern distortions in low-voltage energy beam lithography (LVEBL) were investigated using a silicide direct-write electron beam lithography process. Two methodologies have been proposed to avert charging effects in LVEBL, namely, pattern randomizing and lithography using the crossover voltage. Experimental results demonstrated that these methods are effective in significantly reducing the problems associated with charging. They indicate that charging on a sample is a function of time interval and proximity between line structures. In addition, the optimum time and distance between exposures for no charge-induced pattern distortion were determined. By using the crossover voltage of the material for lithography, charging effect can be significantly minimized.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Photolithography Techniques · Electron and X-Ray Spectroscopy Techniques · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Liu, W. , Ingino, J. , & Pease, R.F. (1995).Resist charging in electron beam lithography.J Vac Sci Technol B 13,1979–1983.10.1116/1.588118 ↗
2. Bai, M. , Pease, R.F.W. , Tanasa, C. , McCord, M.A. , Pickard, D.S. , & Meisburger, D. (1999).Charging and discharging of electron beam resist films.J Vac Sci Technol B 17,2893–2896.10.1116/1.591091 ↗
3. Goldstein, J.I. , Newbury, D.E. , Echlin, P. , Joy, D.J. , Romig, A.D., Jr. , Lyman, C.E. , Fiori, C. , & Lifshin, E. (1992).Scanning Electron Microscopy and X-Ray Microanalysis.New York:Plenum Publishing Corp.10.1007/978-1-4613-0491-3 ↗
4. Thong, J.T.L. , Lee, K.W. , & Wong, W.K. (2001).Reduction in charging effects using vector scanning in the scanningelectron microscope.Scanning Microsc 23,395–402.
5. Utsumi, T. (1999).Low energy electron-beam proximity projection lithography:Discovery of a missing link.J Vac Sci Technol B 17,2897–2902.10.1116/1.591092 ↗
6. Murray, L.P. , Spallas, J.P. , Steber, C. , Lee, K. , Mankos, M. , Hsu, Y. , Gmur, M. , & Chang, T.H.P. (2000).Advances in arrayed microcolumn lithography.J Vac Sci Technol B 18,3099–3104.10.1116/1.1321760 ↗
7. Ingino, J. , Owen, G. , Berglund, C.N. , Browning, R. , & Pease, R.F.W. (1994).Workpiece charging in electron beam lithography.J Vac Sci Technol B 12,1367–1371.10.1116/1.587300 ↗
8. Drouin, D. , Beauvais, B. , Lavallée, E. , Michel, S. , Mouine, J. , & Gauvin, R. (1997).Resistless electron beam lithography process for the fabrication ofsub-50 nm silicide structures.J Vac Sci Technol B 15,2269–2273.10.1116/1.589627 ↗
9. Shaffner, T.J. & Van Veld, R.D. (1971).“Charging” effects in scanning electron microscope.J Phys E Sci, Instrum 4,633–637.10.1088/0022-3735/4/9/002 ↗
10. Lee, Y. , Lee, W. , & Chun, K. (2000).Calculation of surface potential and beam deflection due tocharging effects in electron beam lithography.J Vac Sci Technol B 18,3095–3098.10.1116/1.1319822 ↗
11. Lavallée, E. , Beauvais, J. , Drouin, D. , & Corbin, J. (2000).Study of the effect of layer thickness, beam energy, and metaldensity on the resistless silicide direct-write electron-beamlithography process for the fabrication of nanostructures.J Vac Sci Technol A 18,681–684.10.1116/1.582247 ↗
12. Masatoshi, K. (2001).Simulation of time-dependent charging of resist on Si underelectron-beam irradiation.J Vac Sci Technol B 19,2516–2519.
13. Wong, W.K. , Phang, J.C.H. , & Thong, J.T.L. (1995).Charging control using pulsed scanning electron microscopy.Scanning Microsc 17,312–315.10.1002/sca.4950170508 ↗
14. Cazaux, J. (1986).Some considerations on the electric field induced in insulators byelectron bombardment.J Appl Phys 59,1418–1430.10.1063/1.336493 ↗
15. Chang, T.H.P. , Thomson, M.G.R. , Kratschmer, E. , Kim, H.S. , Yu, M.L. , Lee, K.Y. , Rishton, S.A. , Hussey, B.W. , & Zolgharnain, S. (1996).Electron-beam microcolumns for lithography and related applications.J Vac Sci Technol B 14,3774–3781.10.1116/1.588666 ↗