An Investigation of Al-Rich Alloys in the Al-Cr-Ru System

Abstract Many aerospace components that operate in aggressive environments make use of coating techniques for protection. One of the alloy systems used in these coatings is Al-Cr-Ru, with typical alloy compositions between 20-35 at.% Al and 20-35 at.% Ru. Alloys with a higher Al content may provide protection through an aluminium oxide (AI2O3) scale which is resistant to high-temperature oxidation and corrosion. However, Al-rich alloys in the Al-Cr-Ru system have not been thoroughly investigated. Previously, the phase boundaries of the binary phases, except AI9Cr4, into the ternary were established. The two ternary phases (Ternary 1 and Ternary 2) were identified, although their phase boundaries were unclear. Thus more alloys have been studied to enable the liquidus surface, the solid phase projection and the 600°C isothermal projection to be drawn. As-cast alloys were examined metallographically in the scanning electron microscope. The phases present were confirmed by X-ray diffraction, and the compositions obtained by energy dispersive Xray spectroscopy.