Effect of Photolithographic Biomimetic Surface Microstructure on Wettability and Droplet Evaporation Process
Source abstract
Abstract
In nature, engineering technology and daily life, wetting phenomena are widespread and have essential roles and significance. Bionics is becoming increasingly important nowadays and exploring the mechanism that influences biomimetic surface microstructure on droplet wetting process and heat and mass transfer characteristics is becoming more meaningful. In this paper, based on photolithography technology, SU-8 photoresist was used as raw material to prepare biomimetic surfaces with microstructures in various arrangements. The research results show that the wettability of biomimetic functional surfaces can be regulated by regulating the shape and arrangement of photoresist micro-pillars. At the same time, the effects of surface microstructure configuration and roughness on the heat and mass transfer processes within the droplets were also comprehensively studied. The results show that a biomimetic surface with cylindrical micro-pillars can effectively inhibit the evaporative cooling effect of the liquid–vapour interface. This effect becomes more evident with the increase in roughness, and the interface temperature difference can be reduced by up to 18%. Similarly, the biomimetic surface with cylindrical micro-pillars can also effectively promote the evaporation rate of sessile droplets, which can be increased by about 13%. In addition, the research also shows that regardless of the structure, substrate temperature changes will significantly impact the wetting phenomenon of the biomimetic surface. This study aims to guide the optimal design of biomimetic surfaces prepared based on photoresistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Nanomaterials and Printing Technologies · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK
Funding
H2020-MSCA-RISE-778104–ThermaSMART, Royal Society, UK · China Scholarship Council (CSC)
References (51)
Show source-provided references
1. The foundation of bionics10.1353/pbm.1983.0005 ↗
2. Restoration of sensory information via bionic hands10.1038/s41551-020-00630-8 ↗
3. Review on bio-inspired flight systems and bionic aerodynamics10.1016/j.cja.2020.03.036 ↗
4. Bionic building energy efficiency and bionic green architecture: A review10.1016/j.rser.2017.03.004 ↗
5. Smart bionic surfaces with switchable wettability and applications10.1007/s42235-021-0038-7 ↗
6. A brief review of bio-inspired surface technology and application toward underwater drag reduction10.1016/j.oceaneng.2020.106962 ↗
7. A review on biological and biomimetic materials and their applications10.1007/s00339-020-03633-z ↗
8. Laser engineering of biomimetic surfaces10.1016/j.mser.2020.100562 ↗
9. Flexible pressure sensors based on bionic microstructures: From plants to animals10.1002/admi.202101312 ↗
10. Biomimetic functional material-based sensors for food safety analysis: A review10.1016/j.foodchem.2022.134974 ↗
11. Electronic skin with biomimetic structures realizes excellent isothermal regulation10.1016/j.nanoen.2023.109189 ↗
12. A review on materials and technologies for organic large-area electronics10.1002/admt.202001016 ↗
13. Review of recent advances in inorganic photoresists10.1039/C9RA08977B ↗
14. Bioinspired surfaces with special wettability10.1021/ar040224c ↗
15. Biomimetic modification of polymeric surfaces: A promising pathway for tuning of wetting and adhesion10.1002/mame.201200016 ↗
16. Biomimetic nanofiber patterns with controlled wettability10.1039/b805570j ↗
17. Fabrication of biomimetic fog-collecting superhydrophilic–superhydrophobic surface micropatterns using femtosecond lasers10.1021/acs.langmuir.7b03699 ↗
18. Azad, M., Ellerbrok, D., Barthlott, W., and Koch, K. (2015). Fog collecting biomimetic surfaces: Influence of microstructure and wettability. Bioinspir. Biomim., 10.10.1088/1748-3190/10/1/016004 ↗
19. Choi, Y., Baek, K., and So, H. (2023). 3D-printing-assisted fabrication of hierarchically structured biomimetic surfaces with dual-wettability for water harvesting. Sci. Rep., 13.10.1038/s41598-023-37461-x ↗
20. Fabrication of a superhydrophobic micron-nanoscale hierarchical structured surface for delayed icing and reduced frosting10.1016/j.surfin.2022.102353 ↗
21. Fabrication of non-flaking, superhydrophobic surfaces using a one-step solution-immersion process on copper foams10.1016/j.apsusc.2013.09.051 ↗
22. 3D-printed bioinspired Cassie–baxter wettability for controllable microdroplet manipulation10.1021/acsami.0c18952 ↗
23. Biomimetic surface structures in steel fabricated with femtosecond laser pulses: Influence of laser rescanning on morphology and wettability10.3762/bjnano.9.262 ↗
24. Stratakis, E., Ranella, A., and Fotakis, C. (2011). Biomimetic micro/nanostructured functional surfaces for microfluidic and tissue engineering applications. Biomicrofluidics, 5.10.1063/1.3553235 ↗
25. Droplet evaporation on hot micro-structured superhydrophobic surfaces: Analysis of evaporation from droplet cap and base surfaces10.1016/j.ijheatmasstransfer.2021.122314 ↗
26. In-situ switchable superhydrophobic shape memory microstructure patterns with reversible wettability and adhesion10.1016/j.apsusc.2020.146525 ↗
27. Study on the wettability of biomimetic stainless-steel surfaces inspired by Bauhinia Linn. leaf10.1016/j.surfcoat.2020.126721 ↗
28. Novel corrosion-resistant behavior and mechanism of a biomimetic surface with switchable wettability on Mg alloy10.1016/j.cej.2021.130450 ↗
29. Preparation of a biomimetic superomniphobic hierarchical structure and analysis of droplet wettability10.1049/bsb2.12037 ↗
30. Liang, Y., Peng, J., Li, X., Huang, J., Qiu, R., Zhang, Z., and Ren, L. (2017). Wettability and contact time on a biomimetic superhydrophobic surface. Materials, 10.10.3390/ma10030254 ↗
31. Surface topographies of biomimetic superamphiphobic materials: Design criteria, fabrication and performance10.1016/j.cis.2019.04.007 ↗
32. Recent advances of bioinspired functional materials with specific wettability: From nature and beyond nature10.1039/C8NH00223A ↗
33. Bioinspired and biomimetic micro-and nanostructures in biomedicine10.1016/j.jconrel.2022.02.013 ↗
34. Functional map of biological and biomimetic materials with hierarchical surface structures10.1039/C5RA09490A ↗
35. Biomimetic water-repelling surfaces with robustly flexible structures10.1021/acsami.1c10157 ↗
36. 3D-printed bionic superhydrophobic surface with petal-like microstructures for droplet manipulation, oil-water separation, and drag reduction10.1016/j.matdes.2022.110765 ↗
37. Bioinspired magnetism-responsive hybrid microstructures with dynamic switching toward liquid droplet rolling states10.1039/D3NR02082G ↗
38. Beetle and cactus-inspired surface endows continuous and directional droplet jumping for efficient water harvesting10.1039/D0TA10123K ↗
39. A review on applications of functional superhydrophobic surfaces prepared by laser biomimetic manufacturing10.1007/s10853-023-08217-9 ↗
40. Lasagni, A.F., Alamri, S., Aguilar-Morales, A.I., Rößler, F., Voisiat, B., and Kunze, T. (2018). Biomimetic surface structuring using laser based interferometric methods. Appl. Sci., 8.10.3390/app8081260 ↗
41. Fabrication of biomimetic anisotropic super-hydrophobic surface with rice leaf-like structures by femtosecond laser10.1016/j.optmat.2020.110740 ↗
42. Biomimetic bamboo leaf double-sided microstructure composite surface and its delayed icing performance10.1088/2051-672X/ac6c3e ↗
43. Biomimetic metal surfaces inspired by lotus and reed leaves for manipulation of microdroplets or fluids10.1016/j.apsusc.2020.146052 ↗
44. A quadruple-biomimetic surface for spontaneous and efficient fog harvesting10.1016/j.cej.2021.130119 ↗
45. The superhydrophobic fluorine-containing material prepared through biomimetic UV lithography for oil–water separation and anti-bioadhesion10.1002/macp.202100149 ↗
46. Bionic structures and materials inspired by plant leaves: A comprehensive review for innovative problem-solving10.1016/j.pmatsci.2023.101181 ↗
47. Functional surface microstructures inspired by nature—From adhesion and wetting principles to sustainable new devices10.1016/j.pmatsci.2021.100823 ↗
48. Biomimetic micro/nano structures for biomedical applications10.1016/j.nantod.2020.100980 ↗
49. Chen, Z., and Lee, J.-B. (2021). Biocompatibility of su-8 and its biomedical device applications. Micromachines, 12.10.3390/mi12070794 ↗
50. A review on surface stress-based miniaturized piezoresistive SU-8 polymeric cantilever sensors10.1007/s40820-018-0189-1 ↗
51. Innovative SU-8 lithography techniques and their applications10.3390/mi6010001 ↗