journal article·2022-09-17Open access

Effect of the Antimicrobial Agents Peppermint Essential Oil and Silver Nanoparticles on Bone Cement Properties

Alina Robu, Aurora Antoniac, Robert Ciocoiu, Elena Grosu, Julietta V. Rau, Marco Fosca, Ivan I. Krasnyuk, Gratiela Gradisteanu Pircalabioru, Veronica Manescu (Paltanea), Iulian Antoniac, Sebastian Gradinaru

Biomimetics· Volume 7· Issue 3

Abstract

The main problems directly linked with the use of PMMA bone cements in orthopedic surgery are the improper mechanical bond between cement and bone and the absence of antimicrobial properties. Recently, more research has been devoted to new bone cement with antimicrobial properties using mainly antibiotics or other innovative materials with antimicrobial properties. In this paper, we developed modified PMMA bone cement with antimicrobial properties proposing some experimental antimicrobial agents consisting of silver nanoparticles incorporated in ceramic glass and hydroxyapatite impregnated with peppermint oil. The impact of the addition of antimicrobial agents on the structure, mechanical properties, and biocompatibility of new PMMA bone cements was quantified. It has been shown that the addition of antimicrobial agents improves the flexural strength of the traditional PMMA bone cement, while the yield strength values show a decrease, most likely because this agent acts as a discontinuity inside the material rather than as a reinforcing agent. In the case of all samples, the addition of antimicrobial agents had no significant influence on the thermal stability. The new PMMA bone cement showed good biocompatibility and the possibility of osteoblast proliferation (MTT test) along with a low level of cytotoxicity (LDH test).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Material Science and Engineering, University Politehnica of Bucharest, 313 Splaiul Independentei Street, District 6, 060042 Bucharest, Romania

Istituto di Struttura della Materia, Consiglio Nazionale delle Ricerche (ISM-CNR), Via del Fosso del Cavaliere, 100, 00133 Rome, Italy

Institute of Pharmacy, Department of Analytical, Physical and Colloid Chemistry, I.M. Sechenov First Moscow State Medical University, Trubetskaya 8, Build. 2, 119991 Moscow, Russia

Research Institute of the University of Bucharest, University of Bucharest, 90 Soseaua, Panduri, 050663 Bucharest, Romania

Academy of Romanian Scientists, 54 Splaiul Independentei Street, District 5, 050094 Bucharest, Romania

Faculty of Electrical Engineering, University Politehnica of Bucharest, 313 Splaiul Independentei, District 6, 060042 Bucharest, Romania

Faculty of General Medicine, University of Medicine and Pharmacy Carol Davila Bucharest, 050474 Bucharest, Romania

Funding

Romanian Ministry of Education and Research, CCCDI-UEFISCDI

References (55)

Show source-provided references
1. Robu, A., Antoniac, A., Grosu, E., Vasile, E., Raiciu, A.D., Iordache, F., Antoniac, V.I., Rau, J.V., Yankova, V.G., and Ditu, L.M. (2021). Additives Imparting Antimicrobial Properties to Acrylic Bone Cements. Materials, 14.10.3390/ma14227031 ↗
2. Robu, A., Ciocoiu, R., Antoniac, A., Antoniac, I., Raiciu, A.D., Dura, H., Forna, N., Cristea, M.B., and Carstoc, I.D. (2022). Bone Cements Used for Hip Prosthesis Fixation: The Influence of the Handling Procedures on Functional Properties Observed during in vitro Study. Materials, 15.10.3390/ma15092967 ↗
3. CIHI (2022). CJRR Annual Report: Hip and Knee Replacements in Canada, CIHI. Available online: https://www.cihi.ca/en/cjrr-annual-report-hip-and-knee-replacements-in-canada.
4. Hasandoost, L., Rodriguez, O., Alhalawani, A., Zalzal, P., Schemitsch, E.H., Waldman, S.D., Papini, M., and Towler, M.R. (2020). The Role of Poly(Methyl Methacrylate) in Management of Bone Loss and Infection in Revision Total Knee Arthroplasty: A Review. J. Funct. Biomater., 11.10.3390/jfb11020025 ↗
5. Adverse Local Tissue Reaction after 2 Revision Hip Replacements for Ceramic Liner Fracture10.1097/MD.0000000000006687 ↗
6. Strontium Substituted Tricalcium Phosphate Bone Cement: Short and Long-Term Time-Resolved Studies and In Vitro Properties10.1002/admi.202200803 ↗
7. Complications Related to Biocomposite Screw Fixation in ACL Reconstruction Based on Clinical Experience and Retrieval Analysis
8. In Vitro Characterization of Novel Nanostructured Collagen-Hydroxyapatite Composite Scaffolds Doped with Magnesium with Improved Biodegradation Rate for Hard Tissue Regeneration
9. Modification of Titanium Surface with Collagen and Doxycycline as a New Approach in Dental Implants10.1080/01694243.2015.1073661 ↗
10. The Nanofiller Effect on Properties of Experimental Graphene Dental Nanocomposites10.1080/01694243.2016.1161969 ↗
11. Cavalu, S., Antoniac, I.V., Mohan, A., Bodog, F., Doicin, C., Mates, I., Ulmeanu, M., Murzac, R., and Semenescu, A. (2020). Nanoparticles and Nanostructured Surface Fabrication for Innovative Cranial and Maxillofacial Surgery. Materials, 13.10.3390/ma13235391 ↗
12. Bistolfi, A., Ferracini, R., Albanese, C., Vernè, E., and Miola, M. (2019). PMMA-Based Bone Cements and the Problem of Joint Arthroplasty Infections: Status and New Perspectives. Materials, 12.10.3390/ma12234002 ↗
13. Hand-Mixed and Premixed Antibiotic-Loaded Bone Cement Have Similar Homogeneity10.1007/s11999-009-0847-1 ↗
14. In Vitro Comparison between Commercially and Manually Mixed Antibiotic-Loaded Bone Cements
15. Zapata, M.E.V., Ruiz Rojas, L.M., Mina Hernández, J.H., Delgado-Ospina, J., and Tovar, C.D.G. (2020). Acrylic Bone Cements Modified with Graphene Oxide: Mechanical, Physical, and Antibacterial Properties. Polymers, 12.10.3390/polym12081773 ↗
16. Polymethylmethacrylate Bone Cements and Additives: A Review of the Literature10.5312/wjo.v4.i2.67 ↗
17. Antibacterial PMMA Composite Cements with Tunable Thermal and Mechanical Properties10.1021/acsomega.9b02290 ↗
18. Preparation of Bioactive and Antibacterial PMMA-Based Bone Cement by Modification with Quaternary Ammonium and Alkoxysilane10.1177/08853282211004413 ↗
19. Gentamycin Elution from Polymethylmethacrylate and Bone Graft Substitute: Comparison between Commercially Available and Home-Made Preparations10.1016/j.jor.2019.11.034 ↗
20. Evaluation of Elution and Mechanical Properties of High-Dose Antibiotic-Loaded Bone Cement: Comparative “In Vitro” Study of the Influence of Vancomycin and Cefazolin10.1016/j.arth.2015.02.040 ↗
21. Rifampin and Tobramycin Combination with PMMA Antibiotic Cement10.1007/s00590-018-2302-z ↗
22. Minimum 5 Years’ Follow-up after Gentamicin- and Clindamycin-Loaded PMMA Cement in Total Joint Arthroplasty10.1099/jmm.0.000895 ↗
23. Addition of Ceftaroline Fosamil or Vancomycin to PMMA: An in Vitro Comparison of Biomechanical Properties and Anti-MRSA Efficacy10.1177/2309499019850324 ↗
24. Long-Term Sustained Ciprofloxacin Release from PMMA and Hydrophilic Polymer Blended Nanofibers10.1021/acs.molpharmaceut.5b00804 ↗
25. Cara, A., Ferry, T., Laurent, F., and Josse, J. (2022). Prophylactic Antibiofilm Activity of Antibiotic-Loaded Bone Cements against Gram-Negative Bacteria. Antibiotics, 11.10.3390/antibiotics11020137 ↗
26. In Vitro Elution of Penicillin, Ampicillin, Tetracycline, Tulathromycin, and Florfenicol From Plaster of Paris Beads10.3389/fvets.2020.585423 ↗
27. Antibiotic-Impregnated PMMA Hip Spacers: Current Status10.1080/17453670610012719 ↗
28. Dual Antibiotic Loaded Bone Cement in Patients at High Infection Risks in Arthroplasty: Rationale of Use for Prophylaxis and Scientific Evidence10.5312/wjo.v12.i3.119 ↗
29. Antibiotic Cement Coating in Orthopedic Surgery: A Systematic Review of Reported Clinical Techniques10.1186/s10195-021-00614-7 ↗
30. Świeczko-Żurek, B., Zieliński, A., Bociąga, D., Rosińska, K., and Gajowiec, G. (2022). Influence of Different Nanometals Implemented in PMMA Bone Cement on Biological and Mechanical Properties. Nanomaterials, 12.10.3390/nano12050732 ↗
31. Wekwejt, M., Michno, A., Truchan, K., Pałubicka, A., Świeczko-Żurek, B., Osyczka, A.M., and Zieliński, A. (2019). Antibacterial Activity and Cytocompatibility of Bone Cement Enriched with Antibiotic, Nanosilver, and Nanocopper for Bone Regeneration. Nanomaterials, 9.10.3390/nano9081114 ↗
32. Potent Antimicrobial Activity of Bone Cement Encapsulating Silver Nanoparticles Capped with Oleic Acid10.1002/jbm.b.33196 ↗
33. Mechanical, Material, and Antimicrobial Properties of Acrylic Bone Cement Impregnated with Silver Nanoparticles10.1016/j.msec.2014.11.068 ↗
34. Preliminary Focus on the Mechanical and Antibacterial Activity of a PMMA-Based Bone Cement Loaded with Gold Nanoparticles
35. Novel PMMA Bone Cement Nanocomposites Containing Magnesium Phosphate Nanosheets and Hydroxyapatite Nanofibers10.1016/j.msec.2019.110497 ↗
36. Mechanical Properties of New Denture Base Material Modified with Gold Nanoparticles10.2186/jpr.JPOR_2019_581 ↗
37. Composition and Antimicrobial Activity of Essential Oils from Aromatic Plants Used in Brazil10.1590/S1517-83822004000300001 ↗
38. Physical and Antibacterial Properties of Peppermint Essential Oil Loaded Poly (ε-Caprolactone) (PCL) Electrospun Fiber Mats for Wound Healing10.3389/fbioe.2019.00346 ↗
39. Antimicrobial Efficacy of Five Essential Oils against Oral Pathogens: An in Vitro Study10.4103/1305-7456.119078 ↗
40. Entrapment of Peppermint Oil Using Cellulose Nanocrystals10.1007/s10570-017-1574-5 ↗
41. Chua, C.K., Wong, C.H., and Yeong, W.Y. (2017). Standards, Quality Control, and Measurement Sciences in 3D Printing and Additive Manufacturing, Academic Press. [1st ed.].10.1016/B978-0-12-813489-4.00008-8 ↗
42. Acrylic Bone Cements: Mechanical and Physical Properties10.1016/j.ocl.2004.06.011 ↗
43. Effect of Methylene Blue on the Fracture Toughness of Acrylic Bone Cement10.1016/0142-9612(94)90085-X ↗
44. Effect of Lithotriptor Treatment on the Fracture Toughness of Acrylic Bone Cement10.1016/0142-9612(92)90188-T ↗
45. Properties of Acrylic Bone Cement: State of the Art Review10.1002/(SICI)1097-4636(199722)38:2<155::AID-JBM10>3.0.CO;2-C ↗
46. (2022, June 14). PCPDF-4 Diffraction Database. Available online: https://www.icdd.com/.
47. Zhou, L., Mernagh, T.P., Mo, B., Wang, L., Zhang, S., and Wang, C. (2020). Raman Study of Barite and Celestine at Various Temperatures. Minerals, 10.10.3390/min10030260 ↗
48. Raman Hyperspectral Image Analysis of Benzoyl Peroxide Additive10.1016/j.molstruc.2017.03.002 ↗
49. Raman Spectroscopy of Poly (Methyl Methacrylate) under Laser Shock and Static Compression10.1002/jrs.5839 ↗
50. Development of Barite-Filled Acrylonitrile Butadiene Styrene Composites: Mechanical, Thermal, Melt-Flow and Morphological Characterizations10.1016/j.apsadv.2020.100042 ↗
51. Effects of Concentration and Surface Silanization of Barite on the Mechanical and Physical Properties of Poly(Lactic Acid)/Barite Composites
52. DEB, S. (1999). A Review of Improvements in Acrylic Bone Cements. J. Biomater. Appl., 14.10.1177/088532829901400102 ↗
53. Physical and Mechanical Properties of PMMA Bone Cement Reinforced with Nano-Sized Titania Fibers10.1177/0885328209356944 ↗
54. (2022, July 12). International Standard ISO 5833:2002(E). Available online: https://www.iso.org/standard/30980.html.
55. (2021). Standard Specification for Acrylic Bone Cement (Standard No. ASTM F451).