Correlation of Interface Microstructural Features with the Adhesive Bonding Strength of Galvannealed Interstitial-Free Steel
Source abstract
Abstract
Flaking of galvannealed steel due to interfacial bond failure during press-forming results in a deterioration in product quality and reduced productivity. To solve this problem, an understanding of bonding at the interface must be gained in terms of the microstructure. In this research, the relationship between coating adhesion strength and the evolution of interface microstructure was investigated using an interstitial free steel sheet. Hat channel drawing with a bead machine and stud pin tests were used to measure the flaking resistance and adhesive bond strength, respectively. A strong relationship was found between flaking resistance and interfacial bond strength. High bond strength samples exhibited two distinctive microstructures, Zn-penetrated grain boundary, and rough, island-like knoll, with the knoll always surrounded by the grain boundaries. The rough knoll, with etch pits on the top, formed underneath a crater, and a deep pit was observed at the grain boundary. After stud pin testing, coating residues remained mostly on the Zn penetrated and rough knoll substrates, indicating strong coating adhesion reinforced by a mechanical interlocking effect that originated from the two distinctive microstructures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. S. Shibli, B. Meena, R. Remya, Surf. Coat. Technol. 262, 210 (2015)10.1016/j.surfcoat.2014.12.054 ↗
2. A. Marder, Prog. Mater. Sci. 45, 191 (2000)10.1016/S0079-6425(98)00006-1 ↗
3. P. Martin, M.-A. Handford, R. Packwood, L. Dignard, V. Moore, in Galvatech'92 Conference Proceedings (Amsterdam, 1992), p. 112
4. C. Cheng, V. Krishnardula, H. Hahn, in Galvatech'2015 Conference Proceedings (Toronto, 2015), p. 96
5. Y. Hisamatsu, in Galvatech'89 Conference Proceedings (Tokyo, 1989), p. 3
6. M. Guttmann, Y. Lepretre, A. Aubry, M.-J. Roch, T. Moreau, P. Drillet, J. Mataigne, H. Baudin, in Galvatech'9 Conference Proceedings (Chicago, 1995), p. 295
7. S.P. O'Dell, Investigation into the iron-zinc coating constitution and crater evolution in galvanneal (Swansea University, Swansea, 2004)
8. P.M. Hale, R.N. Wright, F.E. Goodwin, in SAE Technical Papers, 2001-01-0084 (2001)
9. J. Hamers, A.V.D. Heiden, W.V. Koesveld, J.P. Schoen, in Galvatech'98 Conference Proceedings (Chiba, 1998), p. 597
10. M. Arimura, M. Urai, J. Iwaya and M. Iwai, in Galvatech'95 Conference Proceedings (Chicago, 1995), p. 733
11. M.-H. Hong, ISIJ Int. 45, 896 (2005)10.2355/isijinternational.45.896 ↗
12. J. Wu, J. Yang, H. Fang, S. Yoon, C. Lee, Appl. Surf. Sci. 252, 7809 (2006)10.1016/j.apsusc.2005.09.015 ↗
13. G. Bae, S. Kumar, S. Yoon, K. Kang, H. Na, H.-J. Kim, C. Lee, Acta Mater. 57, 5654 (2009)10.1016/j.actamat.2009.07.061 ↗
14. W. V. Koesveld, M. Lamberigts, A. V. D. Heiden, L. Bordignon, in Galvatech'95 Conference Proceedings (Chicago, 1995), p. 343.
15. I. Hertveldt, K. Meseure, C. Xhoffer, ISIJ Int. 39, 1280 (1999)10.2355/isijinternational.39.1280 ↗
16. T. Nakamori, Y. Adachi, M. Arai, A. Shibuya, ISIJ Int. 35, 1494 (1995)10.2355/isijinternational.35.1494 ↗
17. B. Hutchinson, D. Artymowicz, ISIJ Int. 41, 533 (2001)10.2355/isijinternational.41.533 ↗
18. S.-Y. Kim, J.-H. Kwak, J.-H. Chung, K.-M. Cho, Met. Mater. Int. 8, 155 (2002)10.1007/BF03027012 ↗
19. H.-S. Yang, B.-S. Seong, S.-H. Han, S.-H. Choi, Met. Mater. Int. 17, 403 (2011)10.1007/s12540-011-0616-z ↗
20. T. Nakamori, Y. Adachi, T. Toki, A. Shibuya, ISIJ Int. 36, 179 (1996)10.2355/isijinternational.36.179 ↗
21. D.A. Porter, K.E. Easterling, M. Sherif, Phase Transformations in Metals and Alloys (CRC Press, Boca Raton, 2009)