journal article·2023-03Open access

Carrying Gas Influence and Fabrication Parameters Impact in 3D Manufacturing of In Situ TiN-Ti Composites by Direct Laser Deposition

C. Sánchez de Rojas Candela, A. Riquelme, P. Rodrigo, J. Rams

Abstract

Abstract The difficulty of getting a correct distribution of the reinforcement in the metal matrix and the complexity for achieving a good-metallurgy matrix-reinforcement bonding has limited the development of additive manufacturing of metal matrix composites. This research proposes the use of a reactive atmosphere during the fabrication process to obtain titanium matrix composites reinforced with TiN. The relation between the carrying gas and the process parameters used with the presence of porous and defects, the microstructure, and microhardness has been obtained. Nitrogen was used as the carrying gas of the titanium powder. Under laser irradiation, the particles melt and react with nitrogen, resulting in the formation of a titanium matrix composite highly reinforced with TiN. The composite obtained had a microhardness increase between 50 and 100% in comparison with titanium samples fabricated in the same conditions in an argon atmosphere. Three reaction mechanisms have been proposed to take place in the microstructure, depending on the amount of nitrogen in the titanium particles, and its diffusion in them during the manufacture. Graphic abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. G. Rasiya, A. Shukla, K. Saran, Mater. Today Proc. 47, 6896 (2021). https://doi.org/10.1016/j.matpr.2021.05.18110.1016/j.matpr.2021.05.181 ↗
2. C.T. Lynch, J.P. Kershaw, Metal Matrix Composites (CRC Press, Boca Raton, 1972). https://doi.org/10.1201/978135107444510.1201/9781351074445 ↗
3. A. Bhatia, A.K. Sehgal, Mater. Today Proc. (2021). https://doi.org/10.1016/j.matpr.2021.04.37910.1016/j.matpr.2021.04.379 ↗
4. C. Selcuk, Powder Metall. 54, 94 (2011). https://doi.org/10.1179/174329011X1297787458992410.1179/174329011X12977874589924 ↗
5. C. Zhong, J. Liu, T. Zhao, T. Schopphoven, J. Fu, A. Gasser, J.H. Schleifenbaum, Appl. Sci. 10, 764 (2020). https://doi.org/10.3390/app1003076410.3390/app10030764 ↗
6. N. Shamsaei, A. Yadollahi, L. Bian, S.M. Thompson, Addit. Manuf. 8, 12 (2015). https://doi.org/10.1016/j.addma.2015.07.00210.1016/j.addma.2015.07.002 ↗
7. J. Liang, Z. Lin, X. Yin, S. Chen, C. Liu, R. Chai, H. Zhang, G. Tang, K. Tian, Met. Mater. Int. 28, 216 (2022). https://doi.org/10.1007/s12540-021-01035-110.1007/s12540-021-01035-1 ↗
8. R.M. Mahamood, E.T. Akinlabi, Mater. Today Proc. 5, 18362 (2018). https://doi.org/10.1016/j.matpr.2018.06.17510.1016/j.matpr.2018.06.175 ↗
9. A. Riquelme, P. Rodrigo, M.D.D. Escalera-Rodriguez, J. Rams, J. Manuf. Process. 46, 271 (2019). https://doi.org/10.1016/j.jmapro.2019.09.01110.1016/j.jmapro.2019.09.011 ↗
10. S.M. Thompson, L. Bian, N. Shamsaei, A. Yadollahi, Addit. Manuf. 8, 36 (2015). https://doi.org/10.1016/j.addma.2015.07.001.10.1016/j.addma.2015.07.001 ↗
11. A. Aversa, A. Saboori, E. Librera, M. de Chirico, S. Biamino, M. Lombardi, P. Fino, Addit. Manuf. 34, 101274 (2020). https://doi.org/10.1016/j.addma.2020.10127410.1016/j.addma.2020.101274 ↗
12. C. Zeng, H. Wen, H. Bellamy, P.T. Sprunger, P.J. Schilling, S.M. Guo, Surf. Coat. Tech. 378, 124955 (2019). https://doi.org/10.1016/j.surfcoat.2019.12495510.1016/j.surfcoat.2019.124955 ↗
13. J. Abenojar, F. Velasco, A. Bautista, M. Campos, J.A. Bas, J.M. Torralba, Compos. Sci. Technol. 63, 69 (2003). https://doi.org/10.1016/S0266-3538(02)00179-310.1016/S0266-3538(02)00179-3 ↗
14. D. Herzog, V. Seyda, E. Wycisk, C. Emmelmann, Acta Mater. 117, 371 (2016). https://doi.org/10.1016/j.actamat.2016.07.01910.1016/j.actamat.2016.07.019 ↗
15. J. Zhu, H. Zhou, C. Wang, L. Zhou, S. Yuan, W. Zhang, Chinese J. Aeronaut. 34, 91 (2021). https://doi.org/10.1016/j.cja.2020.09.02010.1016/j.cja.2020.09.020 ↗
16. S. Liu, Y.C. Shin, Mater. Design 164, 107552 (2019). https://doi.org/10.1016/j.matdes.2018.10755210.1016/j.matdes.2018.107552 ↗
17. L.S. Wickramaratne, Risk analysis of Ti6Al4V Fasteners failures in aircraft and aerospace industries Lahiru Sajith Wickramaratne (19867871), Technical Report (2019). https://doi.org/10.13140/RG.2.2.20833.66404.10.13140/RG.2.2.20833.66404 ↗
18. T. Bhardwaj, M. Shukla, N.K. Prasad, C.P. Paul, K.S. Bindra, Met. Mater. Int. 26, 1015 (2020). https://doi.org/10.1007/s12540-019-00464-310.1007/s12540-019-00464-3 ↗
19. C.-W. Chan, J. Quinn, I. Hussain, L. Carson, G.C. Smith, S. Lee, Surf. Coat. Tech. 405, 126714 (2021). https://doi.org/10.1016/j.surfcoat.2020.12671410.1016/j.surfcoat.2020.126714 ↗
20. J.D. Avila, K. Stenberg, S. Bose, A. Bandyopadhyay, Acta Biomater. 123, 379 (2021). https://doi.org/10.1016/j.actbio.2020.12.06010.1016/j.actbio.2020.12.060 ↗
21. S. Yuan, N. Lin, J. Zou, X. Lin, Z. Liu, Y. Yu, Z. Wang, Q. Zeng, W. Chen, L. Tian, L. Qin, R. Xie, B. Li, H. Zhang, Z. Wang, B. Tang, Y. Wu, Vacuum 176, 109327 (2020). https://doi.org/10.1016/j.vacuum.2020.10932710.1016/j.vacuum.2020.109327 ↗
22. J. Li, B.Y. Zong, Y.M. Wang, W.B. Zhuang, Mater. Sci. Eng. A 527, 7545 (2010). https://doi.org/10.1016/j.msea.2010.08.02910.1016/j.msea.2010.08.029 ↗
23. M. Iorio, F. Marra, M.L. Santarelli, J. González-Benito, Constr. Build. Mater. 309, 125103 (2021). https://doi.org/10.1016/j.conbuildmat.2021.12510310.1016/j.conbuildmat.2021.125103 ↗
24. H. Attar, S. Ehtemam-Haghighi, D. Kent, M.S. Dargusch, Int. J. Mach. Tools Manuf. 133, 85 (2018). https://doi.org/10.1016/j.ijmachtools.2018.06.00310.1016/j.ijmachtools.2018.06.003 ↗
25. G. Qiao, B. Zhang, Q. Bai, Y. Gao, W. Du, Y. Zhang, J. Manuf. Process. 76, 412 (2022). https://doi.org/10.1016/j.jmapro.2022.02.03310.1016/j.jmapro.2022.02.033 ↗
26. P. Rodrigo Herrero, A. Riquelme Aguado, M.D. Escalera Rodríguez, J. Rams Ramos, Spain Patent, ES2598727B2 (2015)
27. B. Shi, S. Huang, P. Zhu, C. Xu, P. Guo, Y. Fu, Mater. Lett. 276, 128093 (2020). https://doi.org/10.1016/j.matlet.2020.12809310.1016/j.matlet.2020.128093 ↗
28. C. Song, M. Liu, Z.-Q. Deng, S.-P. Niu, C.-M. Deng, H.-L. Liao, Mater. Lett. 217, 127 (2018). https://doi.org/10.1016/j.matlet.2018.01.06810.1016/j.matlet.2018.01.068 ↗
29. X. Zhao, P. Zhang, X. Wang, Y. Chen, H. Liu, L. Chen, Y. Sheng, W. Li, J. Mech. Behav. Biomed. Mater. 78, 143 (2018). https://doi.org/10.1016/j.jmbbm.2017.11.01910.1016/j.jmbbm.2017.11.019 ↗
30. K.D. Traxel, A. Bandyopadhyay, Addit. Manuf. 31, 101004 (2020). https://doi.org/10.1016/j.addma.2019.10100410.1016/j.addma.2019.101004 ↗
31. W. Wei, W. Wu, S. Fan, X. Duan, Mater. Design 202, 109578 (2021). https://doi.org/10.1016/j.matdes.2021.10957810.1016/j.matdes.2021.109578 ↗
32. P.-H. Li, W.-G. Guo, W.-D. Huang, Y. Su, X. Lin, K.-B. Yuan, Mater. Sci. Eng. A 647, 34 (2015). https://doi.org/10.1016/j.msea.2015.08.04310.1016/j.msea.2015.08.043 ↗
33. A. Mostafaei, C. Zhao, Y. He, S.R. Ghiaasiaan, B. Shi, S. Shao, N. Shamsaei, Z. Wu, N. Kouraytem, T. Sun, J. Pauza, J.V. Gordon, B. Webler, N.D. Parab, M. Asherloo, Q. Guo, L. Chen, A.D. Rollett, Curr. Opin. Solid State And Mater. Sci. 26, 100974 (2022). https://doi.org/10.1016/j.cossms.2021.100974.10.1016/j.cossms.2021.100974 ↗
34. S.A. Sajjadi, M.T. Parizi, H.R. Ezatpour, A. Sedghi, J. Alloy. Compd. 511, 226 (2012). https://doi.org/10.1016/j.jallcom.2011.08.10510.1016/j.jallcom.2011.08.105 ↗