Investigating the Effects of CoMoCrSi Powder Composition and Particle Size, and Annealing Heat Treatment on Microstructure and Mechanical and Tribological Performance of HVOF Sprayed Coatings
Source abstract
Abstract
Abstract An investigation was conducted to analyze the mechanical properties, wear behavior, and microstructure of coatings formed by high-velocity oxygen fuel spraying of CoMoCrSi powders. The effects of varying Cr concentration and particle sizes before and after heat treatment at 900 °C for 4 h were studied comparatively. The increase in Cr and Mo elements in the expanse of Co increased the structure's hardness before and after the heat treatment. As this increase was 10% in as-sprayed conditions, annealing raised the increase to 30%. Splat boundaries were the most vulnerable constituents against forces, creating a significant disadvantage in terms of structural integrity and affecting the overall performance. After annealing, the boundary strengths experienced a remarkable four-fold increase and cracks and fractures reduced significantly. The susceptibility of splat boundaries had a detrimental effect on room temperature wear behavior, and increased boundary densities led to a marked reduction in wear performance. Heat treatment induced improvements significantly increased the room temperature wear performance. At elevated temperature, the formation of oxide layers composed of CoMoO4, Co3O4, MoO3, and Cr2O3 overcame the weaknesses of the as-sprayed coating, reducing both the friction coefficient and wear losses. A reduced Co ratio led to the formation of an oxide blend with a higher concentration of Mo and Cr oxides on the surface, further improving the coating's wear behavior. Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. P.M. Natishan, S.H. Lawrence, R.L. Foster, J. Lewis, B.D. Sartwell, Salt fog corrosion behavior of high-velocity oxygen-fuel thermal spray coatings compared to electrodeposited hard chromium. Surf. Coat. Technol. 130, 218–223 (2000). https://doi.org/10.1016/S0257-8972(00)00671-X10.1016/S0257-8972(00)00671-X ↗
2. B.D. Sartwell, P.M. Natishan, I.L. Singer, K.O. Legg, J.D. Schell, J.P. Sauer, Replacement of Chromium Electroplating Using HVOF Thermal Spray Coatings, Paper presented at the 34th Aerospace/Airline Plating & Metal Finishing Forum, San Antonio, Texas, 1998
3. C.D. Prasad, S. Joladarashi, M.R. Ramesh, M.S. Srinath, B.H. Channabasappa, Influence of microwave hybrid heating on the sliding wear behaviour of HVOF sprayed CoMoCrSi coating. Mater. Res. Express 5, 86519 (2018). https://doi.org/10.1088/2053-1591/aad44e10.1088/2053-1591/aad44e ↗
4. T. Sahraoui, H.I. Feraoun, N. Fenineche, G. Montavon, H. Aourag, C. Coddet, HVOF-sprayed Tribaloy©-400: microstructure and first principle calculations. Mater. Lett. 58, 2433–2436 (2004). https://doi.org/10.1016/j.matlet.2004.02.02510.1016/j.matlet.2004.02.025 ↗
5. J.R. Davis, Thermal Spray Society Training Committee, Handbook of Thermal Spray Technology (ASM International, Almere, 2004)
6. A.P. Buang, R. Liu, X.J. Wu, M.X. Yao, Cracking analysis of HVOF coatings under Vickers indentation. J. Coat. Technol. Res. 5, 513–534 (2008). https://doi.org/10.1007/s11998-008-9106-810.1007/s11998-008-9106-8 ↗
7. J.Y. Cho, S.H. Zhang, T.Y. Cho, J.H. Yoon, Y.K. Joo, S.K. Hur, The processing optimization and property evaluations of HVOF Co-base alloy T800 coating. J. Mater. Sci. 44, 6348–6355 (2009). https://doi.org/10.1007/s10853-009-3875-z10.1007/s10853-009-3875-z ↗
8. C.D. Prasad, S. Joladarashi, M.R. Ramesh, M.S. Srinath, B.H. Channabasappa, Development and sliding wear behavior of Co-Mo-Cr-Si cladding through microwave heating. Silicon 11, 2975–2986 (2019). https://doi.org/10.1007/s12633-019-0084-510.1007/s12633-019-0084-5 ↗
9. B. Wielage, A. Wank, H. Pokhmurska, T. Grund, C. Rupprecht, G. Reisel, E. Friesen, Development and trends in HVOF spraying technology. Surf. Coat. Technol. 201, 2032–2037 (2006). https://doi.org/10.1016/j.surfcoat.2006.04.04910.1016/j.surfcoat.2006.04.049 ↗
10. T. Sahraoui, N.E. Fenineche, G. Montavon, C. Coddet, Alternative to chromium: characteristics and wear behavior of HVOF coatings for gas turbine shafts repair (heavy-duty). J. Mater. Process. Technol. 152, 43–55 (2004). https://doi.org/10.1016/j.jmatprotec.2004.02.06110.1016/j.jmatprotec.2004.02.061 ↗
11. G. Bolelli, L. Lusvarghi, F. Pighetti Mantini, M. Barletta, F. Casadei, Microstructural and tribological characterisation of as sprayed and heat treated HVOF deposited Ni alloys. Surf. Eng. 23, 355–372 (2007). https://doi.org/10.1179/174329407X24717210.1179/174329407X247172 ↗
12. A. Rehman, Y. Liang, M. Hassan Shirani Bidabadi, Z. Yu, C. Zhang, H. Chen, Z.G. Yang, Enhancement of cyclic oxidation resistance and effect of transition oxides on wear mechanism of yttrium plus aluminium modified tribaloy T-900 alloy. Corros. Sci. 163, 10828 (2020). https://doi.org/10.1016/j.corsci.2019.10828310.1016/j.corsci.2019.108283 ↗
13. T. Durejko, M. Łazińska, J. Dworecka-Wójcik, S. Lipiński, R.A. Varin, T. Czujko, The Tribaloy T-800 coatings deposited by laser engineered net shaping (LENSTM). Materials 12, 1366 (2019). https://doi.org/10.3390/ma1209136610.3390/ma12091366 ↗
14. R.G. Bohatch, K. Graf, A. Scheid, Effect of track overlap on the microstructure and properties of the CoCrMoSi PTA coatings. Mater. Res. 18, 553–562 (2015). https://doi.org/10.1590/1516-1439.34001410.1590/1516-1439.340014 ↗
15. Z. Yuduo, Y. Zhigang, Z. Chi, L. Hao, Effect of rhenium addition on isothermal oxidation behavior of Tribaloy T-800 alloy. Chin. J. Aeronaut. 23, 370–376 (2010). https://doi.org/10.1016/S1000-9361(09)60229-610.1016/S1000-9361(09)60229-6 ↗
16. C. Navas, M. Cadenas, J.M. Cuetos, J. de Damborenea, Microstructure and sliding wear behaviour of Tribaloy T-800 coatings deposited by laser cladding. Wear 260, 838–846 (2006). https://doi.org/10.1016/j.wear.2005.04.02010.1016/j.wear.2005.04.020 ↗
17. F. Parreiras Marques, A. César Bozzi, C. Scandian, A. Paulo Tschiptschin, Microabrasion of three experimental cobalt-chromium alloys: wear rates and wear mechanisms. Wear 390–391, 176–183 (2017). https://doi.org/10.1016/j.wear.2017.07.02310.1016/j.wear.2017.07.023 ↗
18. R. Liu, J. Yao, Q. Zhang, M.X. Yao, R. Collier, Effects of silicon content on the microstructure and mechanical properties of cobalt-based Tribaloy alloys. J. Eng. Mater. Technol. 138, 041017 (2016). https://doi.org/10.1115/1.403407510.1115/1.4034075 ↗
19. J.H. Zhu, C.T. Liu, L.M. Pike, P.K. Liaw, Thermodynamic interpretation of the size-ratio limits for Laves phase formation. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 30, 1449–1452 (1999). https://doi.org/10.1007/s11661-999-0292-510.1007/s11661-999-0292-5 ↗
20. X.H. Zhang, C. Zhang, Y.D. Zhang, S. Salam, H.F. Wang, Z.G. Yang, Effect of yttrium and aluminum additions on isothermal oxidation behavior of Tribaloy T-700 alloys. Corros. Sci. 88, 405–415 (2014). https://doi.org/10.1016/j.corsci.2014.07.05310.1016/j.corsci.2014.07.053 ↗
21. M.X. Yao, J.B.C. Wu, S. Yick, Y. Xie, R. Liu, High temperature wear and corrosion resistance of a laves phase strengthened Co–Mo–Cr–Si alloy. Mater. Sci. Eng. A 435–436, 78–83 (2006). https://doi.org/10.1016/j.msea.2006.07.05410.1016/j.msea.2006.07.054 ↗
22. A. Sharma, F. Sadeghi, A. Sharma, Experimental investigation of fretting wear of coated spring clip and inlet ring in land-based gas turbines at elevated temperature. Wear 446–447, 203200 (2020). https://doi.org/10.1016/j.wear.2020.20320010.1016/j.wear.2020.203200 ↗
23. A. Rehman, Y. Liang, M.H.S. Bidabadi, Z. Yu, C. Zhang, H. Chen, Z. Yang, gang: comparative cyclic oxidation behaviour and effect of oxides on hardness of wear resistance coating alloys T-401 and T-900. J. Iron. Steel Res. Int. 26, 1069–1079 (2019). https://doi.org/10.1007/s42243-019-00258-210.1007/s42243-019-00258-2 ↗
24. R. Liu, M.X. Yao, P.C. Patnaik, X. Wu, Effects of heat treatment on mechanical and tribological properties of cobalt-base Tribaloy alloys. J. Mater. Eng. Perform. 14, 634–640 (2005). https://doi.org/10.1361/105994905X6456710.1361/105994905X64567 ↗
25. A. Halstead, R.D. Rawlings, The fracture behaviour of two Co–Mo–Cr–Si wear resistant alloys (“Tribaloys”). J. Mater. Sci. 20, 1248–1256 (1985). https://doi.org/10.1007/BF0102632010.1007/BF01026320 ↗
26. G. Bolelli, L. Lusvarghi, Tribological properties of HVOF as-sprayed and heat treated Co–Mo–Cr–Si coatings. Tribol. Lett. 25, 43–54 (2007). https://doi.org/10.1007/s11249-006-9136-210.1007/s11249-006-9136-2 ↗
27. G. Bolelli, L. Lusvarghi, Heat treatment effects on the tribological performance of HVOF sprayed Co–Mo–Cr–Si coatings. Proc. Int. Therm. Spray Conf. 15, 802–810 (2006). https://doi.org/10.1361/105996306X14672110.1361/105996306X146721 ↗
28. H. Guo, X. Zhao, Y. An, H. Zhou, P. Yan, Z. Wu, J. Chen, Fabrication and effect of heat treatment on the microstructure and tribology properties of HVOF-sprayed CoMoCrSi coating. J. Mater. Sci. 56, 12423–12437 (2021). https://doi.org/10.1007/s10853-021-05986-z10.1007/s10853-021-05986-z ↗
29. H. Guo, B. Li, P. Yan, Z. Wu, Microstructures, mechanical properties and tribological behaviors of HVOF-sprayed CoMoCrSi alloy coatings before and after 800 °C-annealed treatment. J. Alloys Compd. 909, 164662 (2022). https://doi.org/10.1016/j.jallcom.2022.16466210.1016/j.jallcom.2022.164662 ↗
30. L. Tang, P. He, J. Kang, L. Wang, S. Ding, S. Chen, X. Zhu, F. Xie, L. Zhou, G. Ma, H. Wang, Significantly enhanced mechanical and tribological properties of Co-based alloy coatings by annealing treatment. Tribol. Int. 146, 106265 (2020). https://doi.org/10.1016/j.triboint.2020.10626510.1016/j.triboint.2020.106265 ↗
31. Y. Wang, J. Liu, N. Kang, G. Darut, T. Poirier, J. Stella, H. Liao, M.P. Planche, Cavitation erosion of plasma-sprayed CoMoCrSi coatings. Tribol. Int. 102, 429–435 (2016). https://doi.org/10.1016/j.triboint.2016.06.01410.1016/j.triboint.2016.06.014 ↗
32. W.J. Yang, L. Zou, X.Y. Cao, J.H. Liu, D.J. Li, Z.B. Cai, Fretting wear properties of HVOF-sprayed CoMoCrSi coatings with different spraying parameters. Surf. Coat. Technol. 358, 994–1005 (2019). https://doi.org/10.1016/j.surfcoat.2018.12.03910.1016/j.surfcoat.2018.12.039 ↗
33. J. Sha, L.Y. Chen, Y.T. Liu, Z.J. Yao, S. Lu, Z.X. Wang, Q.H. Zang, S.H. Mao, L.C. Zhang, Phase transformation-induced improvement in hardness and high-temperature wear resistance of plasma-sprayed and remelted NiCrBSi/WC coatings. Metals 10, 1688 (2020). https://doi.org/10.3390/met1012168810.3390/met10121688 ↗
34. H.N. Xuan, L.Y. Chen, N. Li, H. Wang, C. Zhao, M. Bobrov, S. Lu, L.C. Zhang, Temperature profile, microstructural evolution, and wear resistance of plasma-sprayed NiCrBSi coatings under different powers in a vertical remelting way. Mater. Chem. Phys. 292, 126773 (2022). https://doi.org/10.1016/j.matchemphys.2022.12677310.1016/j.matchemphys.2022.126773 ↗
35. L.Y. Chen, T. Xu, S. Lu, Z.X. Wang, S. Chen, L.C. Zhang, Improved hardness and wear resistance of plasma sprayed nanostructured NiCrBSi coating via short-time heat treatment. Surf. Coat. Technol. 350, 436–444 (2018). https://doi.org/10.1016/j.surfcoat.2018.07.03710.1016/j.surfcoat.2018.07.037 ↗
36. H.N. Xuan, N. Li, J. Zhang, T. Xu, L. Zhang, J. Cheng, D. Oleksandr, S. Lu, L.Y. Chen, Different primary gas flow rates in determining the flattening behavior of in-flight particles in plasma-sprayed NiCrBSi coatings and the resultant microstructure and hardness. Metals 13, 1966 (2023). https://doi.org/10.3390/met1312196610.3390/met13121966 ↗
37. N.M. Chavan, B. Kiran, A. Jyothirmayi, P.S. Phani, G. Sundararajan, The corrosion behavior of cold sprayed zinc coatings on mild steel substrate. J. Therm. Spray Technol. 22, 463–470 (2013). https://doi.org/10.1007/s11666-013-9893-z10.1007/s11666-013-9893-z ↗
38. S. Alidokht, Y. Gao, B.C.N.M. de Castilho, N. Sharifi, M. Harfouche, P. Stoyanov, M. Makowiec, C. Moreau, R.R. Chromik, Microstructure and mechanical properties of Tribaloy coatings deposited by high-velocity oxygen fuel. J. Mater. Sci. 57, 20056–20068 (2022). https://doi.org/10.1007/s10853-022-07843-z10.1007/s10853-022-07843-z ↗
39. K.P. Gupta, The Co–Cr–Si (cobalt–chromium–silicon) system. J. Phase Equilibria Diffus. 31, 300–307 (2010). https://doi.org/10.1007/s11669-010-9670-310.1007/s11669-010-9670-3 ↗
40. A.A. Aleksandrov, V.Y. Dashevskii, B.V. Linchevskii, Thermodynamics of the oxygen solutions in chromium-containing melts of the Fe–Co system. Russ. Metall. (Metally). 2014, 681–687 (2014). https://doi.org/10.1134/S003602951409002X10.1134/S003602951409002X ↗
41. X. Wu, R. Liu, X. Zhang, M.X. Yao, Microstructure and wear performance of high-entropy tribaloy alloys. J. Mater. Eng. Perform. (2023). https://doi.org/10.1007/s11665-023-08349-810.1007/s11665-023-08349-8 ↗
42. Š Houdková, E. Smazalová, M. Vostřák, J. Schubert, Properties of NiCrBSi coating, as sprayed and remelted by different technologies. Surf. Coat. Technol. 253, 14–26 (2014). https://doi.org/10.1016/j.surfcoat.2014.05.00910.1016/j.surfcoat.2014.05.009 ↗
43. W.-Y. Li, C.-J. Li, H. Liao, Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating. J. Therm. Spray Technol. 15, 206–211 (2006). https://doi.org/10.1361/105996306X10806610.1361/105996306X108066 ↗
44. G. Sundararajan, N.M. Chavan, S. Kumar, The elastic modulus of cold spray coatings: influence of inter-splat boundary cracking. J. Ther. Spray Technol. 22, 1348–1357 (2013). https://doi.org/10.1007/s11666-013-0034-510.1007/s11666-013-0034-5 ↗
45. N.M. Chavan, M. Ramakrishna, P.S. Phani, D.S. Rao, G. Sundararajan, The influence of process parameters and heat treatment on the properties of cold sprayed silver coatings. Surf. Coat. Technol. 205, 4798–4807 (2011). https://doi.org/10.1016/j.surfcoat.2011.04.06310.1016/j.surfcoat.2011.04.063 ↗
46. G. Sundararajan, N.M. Chavan, G. Sivakumar, P. Sudharshan Phani, Evaluation of parameters for assessment of inter-splat bond strength in cold-sprayed coatings. J. Therm. Spray Technol. 19, 1255–1266 (2010). https://doi.org/10.1007/s11666-010-9527-710.1007/s11666-010-9527-7 ↗
47. S. Jiang, U. Yin, I. Zhang, A. Zhao, H. Li, 800 °C isothermal section of the Co–Cr–Mo–Si quaternary system. Int. J. Mater. Res. 105, 1191–1201 (2014). https://doi.org/10.3139/146.11113010.3139/146.111130 ↗
48. K.P. Gupta, The Co–Cr–Mo (cobalt–chromium–molybdenum) system. J. Phase Equilibria Diffus. 26, 87–92 (2005). https://doi.org/10.1361/1547703052260810.1361/15477030522608 ↗
49. H. Okamoto, Mo-Si (molybdenum-silicon). J. Phase Equilibria Diffus. 32, 176 (2011). https://doi.org/10.1007/s11669-010-9843-010.1007/s11669-010-9843-0 ↗
50. F. Stein, A. Leineweber, Laves phases: a review of their functional and structural applications and an improved fundamental understanding of stability and properties. J. Mater. Sci. 56, 5321–5427 (2021). https://doi.org/10.1007/s10853-020-05509-210.1007/s10853-020-05509-2 ↗
51. W. Xu, R. Liu, P.C. Patnaik, M.X. Yao, X.J. Wu, Mechanical and tribological properties of newly developed Tribaloy alloys. Mater. Sci. Eng. A 452–453, 427–436 (2007). https://doi.org/10.1016/j.msea.2006.10.08810.1016/j.msea.2006.10.088 ↗
52. F. Chandoul, A. Boukhachem, F. Hosni, H. Moussa, M.S. Fayache, M. Amlouk, R. Schneider, Change of the properties of nanostructured MoO3 thin films using gamma-ray irradiation. Ceram. Int. 44, 12483–12490 (2018). https://doi.org/10.1016/j.ceramint.2018.04.04010.1016/j.ceramint.2018.04.040 ↗
53. K.K. Wang, F.X. Wang, Y.D. Liu, G.B. Pan, Vapor growth and photoconductive property of single-crystalline MoO3 nanosheets. Mater. Lett. 102–103, 8–11 (2013). https://doi.org/10.1016/j.matlet.2013.03.09210.1016/j.matlet.2013.03.092 ↗
54. H. Sun, H. Zhang, X. Jing, J. Hu, K. Shen, Z. Liang, J. Hu, Q. Tian, M. Luo, Z. Zhu, Z. Jiang, H. Huang, F. Song, One-step synthesis of centimeter-size alpha-MoO3 with single crystallinity. Appl. Surf. Sci. 476, 789–795 (2019). https://doi.org/10.1016/j.apsusc.2019.01.16910.1016/j.apsusc.2019.01.169 ↗
55. T. Yang, H. Zhang, Y. Luo, L. Mei, D. Guo, Q. Li, T. Wang, Enhanced electrochemical performance of CoMoO4 nanorods/reduced graphene oxide as anode material for lithium-ion batteries. Electrochim. Acta 158, 327–332 (2015). https://doi.org/10.1016/j.electacta.2015.01.15410.1016/j.electacta.2015.01.154 ↗
56. G. Jiang, L. Li, Z. Huang, Z. Xie, B. Cao, Rod-like porous CoMoO4@C as excellent anode for high performance lithium ion battery. J. Alloys Compd. 790, 891–899 (2019). https://doi.org/10.1016/j.jallcom.2019.03.28310.1016/j.jallcom.2019.03.283 ↗
57. F. Nti, D.A. Anang, J.I. Han, Facilely synthesized NiMoO4/CoMoO4 nanorods as electrode material for high performance supercapacitor. J. Alloys Compd. 742, 342–350 (2018). https://doi.org/10.1016/j.jallcom.2018.01.28910.1016/j.jallcom.2018.01.289 ↗
58. V. Vinothkumar, M. Abinaya, S.M. Chen, Ultrasonic assisted preparation of CoMoO4 nanoparticles modified electrochemical sensor for chloramphenicol determination. J. Solid State Chem. 302, 122392 (2021). https://doi.org/10.1016/j.jssc.2021.12239210.1016/j.jssc.2021.122392 ↗
59. X. Xu, J. Shen, N. Li, M. Ye, Microwave-assisted synthesis of graphene/CoMoO4 nanocomposites with enhanced supercapacitor performance. J. Alloys Compd. 616, 58–65 (2014). https://doi.org/10.1016/j.jallcom.2014.07.04710.1016/j.jallcom.2014.07.047 ↗
60. V.G. Hadjiev, M.N. Iliev, I.V. Vergilov, The Raman spectra of Co3O4. J Phys C. 21, L199–L201 (1988). https://doi.org/10.1088/0022-3719/21/7/00710.1088/0022-3719/21/7/007 ↗
61. J. Olejníček, J. Šmíd, R. Perekrestov, P. Kšírová, J. Rathouský, M. Kohout, M. Dvořáková, Š Kment, K. Jurek, M. Čada, Z. Hubička, Co3O4 thin films prepared by hollow cathode discharge. Surf. Coat. Technol. 366, 303–310 (2019). https://doi.org/10.1016/j.surfcoat.2019.03.01010.1016/j.surfcoat.2019.03.010 ↗
62. B. Rivas-Murias, V. Salgueiriño, Thermodynamic CoO–Co3O4 crossover using Raman spectroscopy in magnetic octahedron-shaped nanocrystals. J. Raman Spectrosc. 48, 837–841 (2017). https://doi.org/10.1002/jrs.512910.1002/jrs.5129 ↗
63. Y. Liu, X. Zhang, Y. Wu, Electrochemical behavior of Co3O4 microspheres in aqueous LiOH solution. Rare Met. 30, 90–93 (2011). https://doi.org/10.1007/s12598-011-0245-110.1007/s12598-011-0245-1 ↗
64. I. Lorite, J.J. Romero, J.F. Fernández, Effects of the agglomeration state on the Raman properties of Cr2O3 nanoparticles. J. Raman Spectrosc. 43, 1443–1448 (2012). https://doi.org/10.1002/jrs.409810.1002/jrs.4098 ↗
65. M. Roy, S. Ghosh, M.K. Naskar, Solvothermal synthesis of Cr2O3 nanocubes via template-free route. Mater. Chem. Phys. 159, 101–106 (2015). https://doi.org/10.1016/j.matchemphys.2015.03.05810.1016/j.matchemphys.2015.03.058 ↗
66. J. Singh, V. Verma, R. Kumar, Preparation and structural, optical studies of Al substituted chromium oxide (Cr2O3) nanoparticles. Vacuum 159, 282–286 (2019). https://doi.org/10.1016/j.vacuum.2018.09.03310.1016/j.vacuum.2018.09.033 ↗
67. S.I. Dolgaev, N.A. Kirichenko, G.A. Shafeev, Deposition of nanostructured Cr2O3 on amorphous substrates under laser irradiation of the solid–liquid interface. Appl. Surf. Sci. 138–139, 449–454 (2019). https://doi.org/10.1016/S0169-4332(98)00439-510.1016/S0169-4332(98)00439-5 ↗
68. H. Guo, Y. Wang, E. Hao, B. Li, Y. An, J. Chen, H. Zhou, P. Yan, Z. Wu, CoMoCrSi coatings prepared by high-velocity oxygen fuel spraying: microstructure and mechanical properties at elevated temperatures up to 800 °C. Mater. Res. Express 6, 1265e9 (2019). https://doi.org/10.1088/2053-1591/ab637410.1088/2053-1591/ab6374 ↗