journal article·2023-03-08Open access

Compelling Evidence for the Role of Retained Austenite in the Formation of Low Cycle Fatigue Extrusions in a 9Ni Steel

Mahira A. Cota Araujo, Jean-Marc Olive, Gilles Pecastaings, Ahmed Addad, Jérémie Bouquerel, Jean-Bernard Vogt

Metals· Volume 13· Issue 3

Abstract

The 9Ni martensitic steels have a martensitic microstructure which contains retained austenite after solution heat treatment and water quenching. Under low cycle fatigue, extrusions formed at the surface of the material and were very close to martensite lath boundaries. The presence of retained austenite at martensite laths has been highly suspected to impact the cyclic plasticity. However, the nano-size of the austenitic phase makes it difficult to obtain clear evidence of its role. The paper focuses on the precise determination of these extrusions and the link with the retained austenite. The paper also emphasizes the innovative and promising use of magnetic force microscopy (MFM) to document cyclic plasticity of a 9Ni steel. It is shown that electron microscopies, even the most advanced ones, may be unsuccessful in reaching this goal, while magnetic force microscopy (MFM) overcame the difficulty. This technique has allowed imaging of both the extrusion and the retained austenite. These analyses confirm that the fatigue extrusions originated from a local displacement of martensite lath. The proposed mechanism, in which the retained austenitic film acts as a lubricant film or greasy film promoting a flowing of martensite along the interfaces, is unambiguously demonstrated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Force Microscopy Techniques and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CNRS, INRAE, Centrale Lille, UMR 8207—UMET—Unité Matériaux et Transformations, Université de Lille, 59000 Lille, France

Villares Metals, SA. Sumaré, São Paulo 13178-902, Brazil

CNRS, Institut de Mécanique et d’Ingénierie, UMR 5295, Université de Bordeaux, 33405 Talence, France

Centre de Recherche Paul Pascal, UMR 5031 CNRS, Université de Bordeaux, 33600 Pessac, France

References (38)

Show source-provided references
1. Dislocations and persistent slip bands in fatigued copper10.1080/14786436608218989 ↗
2. Internal displacements of persistent slip bands in cyclically deformed nickel single crystals10.1002/pssa.2210610141 ↗
3. Fatigue life behavior of copper single crystals. Part I: Observations of crack nucleation10.1111/j.1460-2695.1981.tb01130.x ↗
4. Dislocation substructures and the initiation of cracks by fatigue
5. Crack nucleation and stage I propagation in high strain fatigue—II. Mechanism10.1016/0001-6160(78)90029-9 ↗
6. Role of persistent slip bands in fatigue10.1080/14786430310001610339 ↗
7. The influence of point-defect clusters on fatigue hardening of copper single crystals10.1002/pssa.2210110220 ↗
8. Voids in fatigued copper single crystals10.1002/pssa.2210670248 ↗
9. On the role of point defects in fatigue crack initiation10.1016/0025-5416(87)90157-1 ↗
10. Fundamental mechanisms of surface damage associated to the localization of the plastic deformation in fatigue10.1016/j.proeng.2010.03.081 ↗
11. Hu, Y., Chen, Y., He, C., Liu, Y., Wang, Q., and Wang, C. (2020). Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime. Materials, 13.10.3390/ma13214820 ↗
12. Salazar, D., Serre, I., and Vogt, J.-B. (2008, January 8–12). LCF mechanisms of the 25Cr-7Ni-0.25N duplex stainless steel investigated by atomic force microscopy. Proceedings of the Sixth International Conference on Low Cycle Fatigue (LCF 6), Berlin, Germany.
13. Overview of fatigue behavior in copper single crystals—I. Surface morphology and stage I crack initiation sites for tests at constant strain amplitude10.1016/0001-6160(89)90217-4 ↗
14. Low amplitude fatigue of copper single crystals–III. PSB sections10.1016/0001-6160(85)90242-1 ↗
15. Ex and in situ investigations on the role of persistent slip bands and grain boundaries in fatigue crack initiation10.1557/jmr.2017.313 ↗
16. Study of cyclic strain localization and fatigue crack initiation using FIB technique10.1016/j.ijfatigue.2011.05.002 ↗
17. A model of extrusions and intrusions in fatigued metals I. Point-defect production and the growth of extrusions10.1080/01418618108239541 ↗
18. Quantitative measurement of persistent slip band profiles and crack initiation10.1016/0001-6160(86)90192-6 ↗
19. Mechanisms of extrusion and intrusion formation in fatigued crystalline materials10.1016/j.msea.2013.12.005 ↗
20. Polák, J. (2023). Role of Persistent Slip Bands and Persistent Slip Markings in Fatigue Crack Initiation in Polycrystals. Crystals, 13.10.3390/cryst13020220 ↗
21. Profiles of persistent slip markings and internal structure of underlying persistent slip bands10.1111/ffe.12567 ↗
22. Krupp, U., and Giertler, A. (2022). Surface or Internal Fatigue Crack Initiation during VHCF of Tempered Martensitic and Bainitic Steels: Microstructure and Frequency/Strain Rate Dependency. Metals, 12.10.3390/met12111815 ↗
23. Wildeis, A., Christ, H.-J., and Brandt, R. (2022). Influence of Residual Stresses on the Crack Initiation and Short Crack Propagation in a Martensitic Spring Steel. Metals, 12.10.3390/met12071085 ↗
24. The early stage of fatigue crack initiation in a 12%Cr martensitic steel10.1016/j.ijfatigue.2017.09.006 ↗
25. Retained austenite-aided cyclic plasticity of the quenched 9Ni steel10.1016/j.ijfatigue.2021.106445 ↗
26. On the role of interlath retained austenite in the deformation of lath martensite10.1088/0965-0393/22/4/045011 ↗
27. Cullity, B.D. (1956). Elements of X-ray Diffraction, Addison-Wesley Publishing.
28. Carbon enrichment in retained austenite films in low carbon lath martensite steel10.2355/isijinternational.51.1200 ↗
29. Ageing effect on cyclic plasticity of a tempered martensitic steel10.1016/j.ijfatigue.2006.03.007 ↗
30. Jürgens, M., Olbricht, J., Fedelich, B., and Skrotzki, B. (2019). Low Cycle Fatigue and Relaxation Performance of Ferritic–Martensitic Grade P92 Steel. Metals, 9.10.3390/met9010099 ↗
31. Deformation-Induced Martensitic Transformation Behavior of Retained Austenite during Rolling Contact in Carburized SAE4320 Steel10.2355/isijinternational.ISIJINT-2021-107 ↗
32. Moiré fringe method via scanning transmission electron microscopy10.1002/smtd.202101040 ↗
33. The stability of precipitated austenite and the toughness of 9Ni steel10.1007/BF02670423 ↗
34. Magnetic force microscopy: Quantitative issues in biomaterials10.4161/biom.29507 ↗
35. Vokoun, D., Samal, S., and Stachiv, I. (2022). Magnetic Force Microscopy in Physics and Biomedical Applications. Magnetochemistry, 8.10.3390/magnetochemistry8040042 ↗
36. Local characterization of austenite and ferrite phases in duplex stainless steel using MFM and nanoindentation10.1557/jmr.2012.99 ↗
37. Determination of retained austenite in multiphase steels by magnetic force microscopy10.1515/ijmr-2006-0182 ↗
38. Shear-band affected zone revealed by magnetic domains in a ferromagnetic metallic glass10.1038/s41467-018-06919-2 ↗