journal article·2015-02

Characterization of Newly Developed Semisolid Stir Joining Method for Cast Cu Base Alloy (Cu-Al-Si-Fe) and Effect of Stirrer Type on Uniformity of Microstructure

Keyvan Ferasat, Hossein Aashuri, Amir Hossein Kokabi, Siamak Nikzad, Mahdi Shafizadeh

Publisher page

Abstract

In this research, the semisolid stir joining method was used to overcome the problem of hot cracking in welding aluminum and silicon bronzes. Moreover, the effects of grooved and cylindrical tools on the microstructure and mechanical properties of samples were examined. After welding specimens, mechanical tests were carried out to find differences between the cast and welded samples. Optical microscopy and scanning electron microscopy were used to study microstructure. X-ray diffraction was used to investigate compounds formed during casting and welding. The solidus and liquidus temperatures of the alloy were measured by differential scanning calorimetry. In this study, the temperature of the work pieces was raised to 1203 K (930 °C) that is in the semisolid region, and the weld seams were stirred by two different types of tools at the speed of 1600 rpm. Macro and micro-structural analyses show uniformity in the phase distribution for specimens welded by cylindrical tool. Desirable and uniform mechanical properties obtained when the cylindrical tool was used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. W. Bolton: Materials Technology for Technicians, p. 55, Butterworth, UK, 1981.
2. L. Wang, X. Xiaolei, X. Jiujun, H. Zukun: Thin Solid Films, 2000, vol. 376, pp. 159-63.10.1016/S0040-6090(00)01213-X ↗
3. Welding Copper and Copper Alloys, Welding Handbook, 8th ed., vol. 3, pp. 163–216, American Welding Society, 1996.
4. H. Meigh: Cast and Wrought Aluminium Bronzes, 1st ed., Cambridge, UK, 2000.
5. M. Kaplan, A. K. Yildiz: Materials letters, 2003, vol. 57, pp. 4402-11.10.1016/S0167-577X(03)00332-X ↗
6. J. Iqbal, F. Ahmed, F. Hasan: Pak J Engg & Appl Sci., 2008, vol. 3, pp. 47-53.
7. A. H. Khan, P. K. Singh: International J Metallurgical & Mater Sci Eng., 2013, vol. 3, pp. 57-66.
8. W. Zhang, T. Ngai, W. Xia, Q. Cheng, W. Cheng: Trans Nonferrous Met Soc China., 2002, vol. 12(4), pp. 770-4.
9. D. V. Kudashov, R. Zuater, H. R. Muller: Mater Sci Eng A., 2008, vol. 477, pp. 43–9.10.1016/j.msea.2007.06.085 ↗
10. P. F. Mendez, C. S. Rice, S. B. Brown: Weld J., 2002, vol. 81, pp. 181-7.
11. BS Amirkhiz, H Aashuri, A H Kokabi, M Abbasi Gharacheh, J Mola (2006). Solid State Phen. 116, 397-401.10.4028/www.scientific.net/SSP.116-117.397 ↗
12. A. Narimannezhad, H. Aashuri, A. H. Kokabi, A. Khosravani: J Mater Process Techno., 2009, vol. 209, pp. 4112–21.10.1016/j.jmatprotec.2008.10.004 ↗
13. S. M. J. Alvani, H. Aashuri, A. Kokabi, R. Beygi: Trans Nonferrous Met Soc China. 2010, vol. 20, pp. 1792–8.10.1016/S1003-6326(09)60376-9 ↗
14. H. Xu, Q. Luo, B. Zhou, Y. Zeng, C. Du: Mater Design., 2012, vol. 34, pp. 452–8.10.1016/j.matdes.2011.09.001 ↗
15. V. A. Hosseini, H. Aashuri, A. H. Kokabi: Mater Sci Eng A., 2013, vol. 565, pp. 165–71.10.1016/j.msea.2012.12.034 ↗
16. V. A. Hosseini, H. Aashuri, A. H. Kokabi: Trans Nonferrous Met Soc China., 2013, vol. 23, pp. 2585−90.10.1016/S1003-6326(13)62771-5 ↗
17. R. S. Mishraa, Z.Y. Ma: Mater Sci Eng R., 2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
18. R. Nandan, T. DebRoy, H.K.D.H. Bhadeshia: Progress in Mater Sci., 2008, vol. 53, pp. 980-1023.10.1016/j.pmatsci.2008.05.001 ↗
19. ASM Special Handbook: Copper and Copper Alloys, 1st ed., pp. 336–9, ASM International, 2001.
20. X. Li, W. Liang, X. Zhao, Y. Zhang, X. Fu, F. Liu: J Alloys Compd., 2009, Vol. 471, pp. 408–11.10.1016/j.jallcom.2008.03.107 ↗
21. N. Ponweiser, K. W. Richter: J Alloys Compd., 2012, vol. 512, pp. 252– 63.10.1016/j.jallcom.2011.09.076 ↗
22. K. Sufryd, N. Ponweiser, P. Riani, K.W. Richter, and G. Cacciamani: Intermetallics, 2011, vol. 19, pp. 1479–88.10.1016/j.intermet.2011.05.017 ↗
23. P. Riani, K. Sufryd, G. Cacciamani: Intermetallics., 2009, vol. 17, pp. 154-64.10.1016/j.intermet.2008.10.011 ↗
24. V. Firouzdor, S. Kou: Metall Mater Trans A., 2010, vol. 41A, pp. 2914–35.10.1007/s11661-010-0340-1 ↗