journal article·2011-09

Combined Model to Describe Both the Mechanical and Microstructural Transients under a Reversal of Strain

D. Jorge-Badiola, J. L. Lanzagorta, I. Gutiérrez

Publisher page

Abstract

A strain reversal produces microstructural and mechanical transients that cannot be described with conventional models applicable under monotonic deformation conditions. State-of-the-art models incorporating plastic strain path effects are polarized into continuum constitutive models of cyclic plasticity and multiscale constitutive approaches extrapolating crystallographic hardening models for monocrystals to polycrystals. The present work proposes a model midway between these two approaches that describes the mechanical transient through a combined kinematic-isotropic hardening model and the microstructural transient and its effect on the subsequent static recrystallization kinetics. The incorporation of an effective strain concept makes the link among the different submodels and allows for the first time an accurate reproduction with a reduced number of parameters both for mechanical and microstructural experimental data during the transient following a strain reversal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. S.B. Davenport and R.L. Higginson: J. Mater. Process. Technol., 2000, vol. 98, pp. 267–9110.1016/S0924-0136(99)00320-9 ↗
2. N. Christodoulou, O.T. Woo, and S.R. MacEwen: Acta Metall., 1986, vol. 34, pp. 1553–62.10.1016/0001-6160(86)90100-8 ↗
3. T. Hasegawa, T. Yakou, and S. Karashima: Mater. Sci. Eng., 1975, vol. 20, pp. 267–76.10.1016/0025-5416(75)90159-7 ↗
4. M.G. Stout and A.D. Rollett: Metall. Trans. A, 1990, vol. 21A, pp. 3201–13.10.1007/BF02647315 ↗
5. H. Takahashi and I. Shiono: Int. J. Plast., 1991, vol. 7, pp. 199–217.10.1016/0749-6419(91)90030-3 ↗
6. R. Bartolomé, D. Jorge-Badiola, J.I. Astiazarán, and I. Gutiérrez: Mater. Sci. Eng. A, 2003, vol. 344, pp. 340–47.10.1016/S0921-5093(02)00417-3 ↗
7. I.P. Pinheiro, R. Barbosa, and P.R. Cetlin: Scripta Mater., 2001, vol. 44, pp. 187–93.10.1016/S1359-6462(00)00556-X ↗
8. D. Jorge-Badiola, A. Iza-Mendia, and I. Gutiérrez: Mater. Sci. Forum, 2005, vols. 495–497, pp. 1031–36.10.4028/www.scientific.net/MSF.495-497.1031 ↗
9. D. Jorge-Badiola, A. Iza-Mendia, and I. Gutiérrez: J. Microsc., 2009, vol. 235, pp. 36–49.10.1111/j.1365-2818.2009.03179.x ↗
10. E.F. Rauch: Mater. Sci. Eng. A, 1997, vols. 234–236, pp. 653–56.10.1016/S0921-5093(97)00357-2 ↗
11. B. Peeters, S.R. Kalidindi, P. Van Houtte, and E. Aernoudt: Acta Mater., 2000, vol. 48, pp. 2123–33.10.1016/S1359-6454(00)00047-1 ↗
12. Q. Zhu and C.M. Sellars: Proc. of Rex′96, 3rd Int. Conf. on Recrystallization and Related Phenomena, T.R. McNelley, ed., Monterey Institute of Advanced Studies, Monterey, CA, 1997, pp. 195–202
13. W. Lopes, E.C.S. Correa, H.B. Campos, M.T.P. Aguilar, and P.R. Cetlin: J. Mater. Sci., 2009, vol. 44, pp. 441–48.10.1007/s10853-008-3121-0 ↗
14. F. Yoshida, T. Uemori, and K. Fujiwara: Int. J. Plast., 2002, vol. 18, pp. 633–59.10.1016/S0749-6419(01)00049-3 ↗
15. M.C Somani and L.P. Karjalainen: Ironmaking and Steelmaking, 2005, vol. 32, pp. 294–98.10.1179/174328105X45901 ↗
16. T.C. Harrison, R.T. Weiner, and G.D. Fearnehough: J. Iron Steel Inst., 1972, vol. 210, pp. 334–36.
17. N.A. Sakharova and J.V. Fernandes: Mater. Chem. Phys., 2006, vol. 98, pp. 44–50.10.1016/j.matchemphys.2006.01.038 ↗
18. Q. Zhu and C.M. Sellars: Scripta Mater., 2001, vol. 45, pp. 41–48.10.1016/S1359-6462(01)00989-7 ↗
19. R. Bartolomé, J.I. Astiazaran, A. Iza-Mendia, and I. Gutiérrez: Thermomechanical Processing of Steels, IOM Communications, London, 2000, pp. 221–30.
20. D. Jorge-Badiola and I. Gutiérrez: Acta Mater., 2004, vol. 52, pp. 333–41.10.1016/j.actamat.2003.09.018 ↗
21. T. Furu, H.R. Shercliff, G.J. Baxter, and C.M. Sellars: Acta Mater., 1999, vol. 47, pp. 2377–84.10.1016/S1359-6454(99)00113-5 ↗
22. J.L. Lanzagorta, D. Jorge-Badiola, and I. Gutiérrez: Mater. Sci. Eng. A, 2010, vol. 527, pp. 934–40.10.1016/j.msea.2009.09.007 ↗
23. J.D. Embury, W.J. Poole, and E. Koken: Scripta Mater., 1992, vol. 27, pp. 1465–70.10.1016/0956-716X(92)90129-3 ↗
24. D.T. McDonald, P.S. Bate, and W.B. Hutchinson: Mater. Sci. Technol., 2005, vol. 21, pp. 693–700.10.1179/174328405X43171 ↗
25. E. Lindh, B. Hutchinson, and S. Ueyama: Scripta Metall., 1993, vol. 29, pp. 347–52.10.1016/0956-716X(93)90511-P ↗
26. J.L. Chaboche: Int. J. Plast., 2008, vol. 24, pp. 1642–93.10.1016/j.ijplas.2008.03.009 ↗
27. B. Peeters, M. Seefeld, C. Teodosiu, S.R. Kalidindi, P. Van Houtte, and E. Aernoudt: Acta Mater., 2001, vol. 49, pp. 1607–19.10.1016/S1359-6454(01)00066-0 ↗
28. S. Mahesh, C.N. Tomé, R.J. McCabe, G.C. Kaschner, I.J. Beyerlein, and A. Misra: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3763–74.10.1007/s11661-004-0282-6 ↗
29. I.J. Beyerlein and C.N. Tomé: Int. J. Plast., 2007, vol. 23, pp. 640–64.10.1016/j.ijplas.2006.08.001 ↗
30. E.F. Rauch, J.J. Gracio, and F. Barlat: Acta Mater., 2007, vol. 55, pp. 2939–48.10.1016/j.actamat.2007.01.003 ↗
31. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
32. H. Mecking and Y. Estrin: Proc. 8th Risø Int. Symp. on Materials Science, S.I. Andersen et al., eds., Risø National Laboratory, Roskilde, Denmark, 1987, pp. 125–46.
33. A.I. Fernández, B. López, and J.M. Rodríguez-Ibabe: Scripta Mater., 1999, vol. 40, pp. 543–49.10.1016/S1359-6462(98)00452-7 ↗
34. D.S. Fields, Jr. and W.A. Backofen: Proc. ASTM, 1957, vol. 57, pp. 1259–72.
35. D. Jorge-Badiola, A. Iza Mendia, and I. Gutiérrez: J. Microsc., 2007, vol. 228, pp. 373–83.10.1111/j.1365-2818.2007.01850.x ↗
36. D. Jorge-Badiola, J.L. Lanzagorta, and I. Gutiérrez: Rex&GG IV Conf., Sheffield, United Kingdom, July 4–9, 2010, in press.
37. M.M. Farag, C.M. Sellars, and W.J. McG Tegart: “Deformation under Hot Working Conditions,” Special Report No. 108, Iron and Steel Institute, London, 1968, pp. 60–67.
38. D. Jorge-Badiola, A. Iza-Mendia, and I. Gutiérrez: Mater. Sci. Eng. A, 2005, vol. 394A, pp. 445–54.10.1016/j.msea.2004.11.049 ↗
39. M.J. Luton and J.J. Jonas: Acta Metall., 1970, vol. 18, pp. 511–17.10.1016/0001-6160(70)90138-0 ↗
40. U.F. Kocks, T. Hasegawa, and R.O. Scattergood: Scripta Metall., 1980, vol. 14, pp. 449–54.10.1016/0036-9748(80)90343-9 ↗
41. A. Orlova and J. Cadek: Z Metallkd., 1974, vol. 65, pp. 200–04.
42. I. Gutiérrez and A. Altuna: Acta Mater., 2008, vol. 56, pp. 4682–90.10.1016/j.actamat.2008.05.023 ↗
43. C.M. Sellars: Czech J. Phys., 1985, vol. 35, pp. 239–48.10.1007/BF01605090 ↗
44. A. Laasraoui and J.J. Jonas: Metall. Trans. A, 1991, vol. 22A, pp. 151–60.10.1007/BF03350957 ↗
45. F. Yoshida and T. Uemori. Int. J. Plast., 2002, vol. 18, pp. 661–86.10.1016/S0749-6419(01)00050-X ↗
46. I. Gutiérrez, D. Jorge-Badiola, and J.L. Lanzagorta: in draft final report “Optimisation of finishing processes for eliminating rectification of plate and sections” RFSR-CT-2007-00014, D.C.J. Farrugia et al., March 2011, to be published in Technical Steel Research (European Commission).