Functionally Graded High-Alloy CrMnNi TRIP Steel Produced by Local Heat Treatment Using High-Energy Electron Beam
Source abstract
Abstract
Cold-rolled, high-alloy CrMnNi TRIP steel was heat treated by electron beam (EB) treatment. After cold rolling to a deformation degree of 70 pct, the microstructure was mainly martensitic with residual austenite. The aim of the subsequent EB treatment was to improve mechanical properties regarding strength and ductility by grain refinement. The process is influenced by EB-specific parameters, resulting in different temperature-time regimes due to different heating and cooling rates. Grain size gradients over the cross section could not be completely suppressed, but minimized. Investigations included optical microscopy, scanning electron microscopy, hardness measurements, quasi static tensile tests, digital image correlation, and thermography for functionally graded tensile specimens. The local heat treatment was used to set specific tailored properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A. Jahn, A. Kovalev, A. Weiß, S. Wolf, L. Krüger, and P. R. Scheller: Steel Res. Int., 2011, 82, pp. 39–44.10.1002/srin.201000228 ↗
2. A. Jahn, A. Kovalev, A. Weiß, P.R. Scheller, S. Wolf, L. Krüger, S. Martin, and U. Martin: Proc. of ESOMAT 2009, Prague, 2009, vol. 05013, pp. 1–7. DOI:10.1051/esomat/200905022.10.1051/esomat/200905022 ↗
3. A. Weidner, A. Glage, and H. Biermann: Proc. Eng., 2010, vol. 2, pp. 1961–1971.10.1016/j.proeng.2010.03.211 ↗
4. A. Weidner, S. Martin, V. Klemm, U. Martin, and H. Biermann: Scr. Mater., 2011, vol. 64, pp. 513–516.10.1016/j.scriptamat.2010.11.028 ↗
5. A. Weiss, H. Gutte, M. Radke, and P.R. Scheller: Patent WO002008009722A1.
6. A. Weidner, A. Müller, A. Weiss, and H. Biermann: Mater. Sci. Eng. A, 2013, vol. 571, pp. 68–76.10.1016/j.msea.2013.02.008 ↗
7. L. Krüger, S. Wolf, U. Martin, Martin, S., Scheller, P. R., A. Jahn, and A. Weiß: J. Phys.: Conf. Ser., 2010, vol. 240, pp. 1–4.
8. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Mattlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
9. M. Moallemi, A. Najafizadeh, A. Kermanpur, and A. Rezaee: Mater. Sci. Eng. A, 2011, vol. 530, pp. 378-381.10.1016/j.msea.2011.09.099 ↗
10. T. Lee, M. Koyama, K. Tsuzaki, Y.-H. Lee, and C. S. Lee: Mater. Letters, 2012, vol. 75, pp. 169-171.10.1016/j.matlet.2012.02.012 ↗
11. R. D. K. Misra, S. Nayak, S. A. Mali, J. S. Shah, M. C. Somani, and L. P. Karjalainen: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3–12.10.1007/s11661-009-0072-2 ↗
12. A. Rezaee, A. Najafizadeh, A. Kermanpur, and M. Moallemi: Mater. Des., 2011, vol. 32, pp. 4437–42.10.1016/j.matdes.2011.03.065 ↗
13. V.S.A. Challa, X.L. Wan, M.C. Somani, L.P. Karjalainen, R.D.K. Misra, Mater. Sci. Eng. A, 2014, 613, pp. 60–70.10.1016/j.msea.2014.06.065 ↗
14. J. E. Jin, Y. S. Jung, and Y. K. Lee: Mater. Sci. Eng. A, 2007, vol. 449–451, pp. 786–789.10.1016/j.msea.2006.02.350 ↗
15. S. Takaki, K. Tomimura, and S. Ueda: ISIJ INT., 1994, 34, pp. 522–527.10.2355/isijinternational.34.522 ↗
16. D. L. Johannsen, A. Kyrolainen, and P. J. Ferreira: Metall. Mater. Trans., 2006, vol. 37A, pp. 2325–2338.10.1007/BF02586207 ↗
17. F. Forouzan, A. Najafizadeh, Kermanpur, A., A. Hedayati, and R. Surkialiabad: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7334–7339.10.1016/j.msea.2010.08.002 ↗
18. R. D. K. Misra, Z. Zhang, P. K. C. Venkatasurya, M. C. Somani, and L. P. Karjalainen: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7779–7792.10.1016/j.msea.2010.08.051 ↗
19. R. D. K. Misra, S. Nayak, P. K. C. Venkatasurya, V. Ramuni, M. C. Somani, and L. P. Karjalainen: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2162–2174.10.1007/s11661-010-0230-6 ↗
20. M. Eskandari, A. Zarei-Hanzaki, and H. R. Abedi: Mater. and Design, 2013, vol. 45, pp. 674–681.10.1016/j.matdes.2012.08.042 ↗
21. A. Müller, C. Segel, M. Linderov, A. Vinogradov, A. Weidner, and H. Biermann: Metall. Mater. Trans. A, 2015. DOI:10.1007/s11661-015-2953-x.10.1007/s11661-015-2953-x ↗
22. R. D. K. Misra,, B. R. Kumar, M. Somani, and P. Karjalainen: Scripta Mater., 2008, vol. 59, pp. 79–82.10.1016/j.scriptamat.2008.02.028 ↗
23. R. D. K. Misra, Z. Zhang, Venkatasurya, P. K. C., M. C. Somani, and L. P. Karjalainen: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6958–6963.10.1016/j.msea.2011.05.068 ↗
24. R.D.K. Misra, Z. Zhang, Z. Jia, P.K.C. Venkatsurya, M.C. Somani, and L.P. Karjalainen, Mater. Sci. Eng. A, 2012, vol. 548, pp. 161–174.10.1016/j.msea.2012.04.005 ↗
25. T. Niendorf, C. J. Rüsing, A. Frehn, and H. J. Maier: Mater. Res. Lett., 2013, vol. 1, pp. 96–101.10.1080/21663831.2013.782075 ↗
26. R. Zenker, Adv. Eng. Mat., 2004, vol. 6, pp. 581-588.10.1002/adem.200400416 ↗
27. R. Zenker, Int. Heat Treat. Surf. Eng., 2009, vol. 3, pp. 141-146.10.1179/174951409X12542264514248 ↗
28. R. Zenker, Int. Heat Treat. and Surf. Eng., 2011, vol. 5, pp. 50-56.10.1179/174951411X12956207253465 ↗
29. J.L. Dossett and G.E. Totten: ASM Handbook, Steel Heat Treat. Fund. and Proc., vol. 4A, 2013, ASM International, Materials Park, OH, 2013, pp. 462–70.
30. Feritscope & FMP30—Helmut Fischer GmbH, Industriestraße 21, 71069 Sindelfingen-Maichingen
31. J. Talonen, P. Aspegren, and H. Hänninen: Mat. Sci. Technol., 2004, vol. 20, pp. 1506–1512.10.1179/026708304X4367 ↗
32. D. Raabe, and K. Lücke: Mat. Sci. Forum, 1994, vol. 157-162, pp. 597–610.10.4028/www.scientific.net/MSF.157-162.597 ↗
33. T. Leffers, and R. K. Ray: Progr. in Mat. Sci., 2009, vol. 54, pp. 351–396.10.1016/j.pmatsci.2008.09.002 ↗
34. S. Wolf: Doctoral thesis, TU Bergakademie Freiberg, 2012.
35. C. S. Yoo, Y. M. Park, Y. S. Jung, and Y. K. Lee: Scr. Mater., 2008, vol. 59, pp. 71–74.10.1016/j.scriptamat.2008.02.024 ↗
36. J. Huong, X. Ye, Y. Gu, and Z. Xu: Mater. Sci. Eng. A, 2012, vol. 532, pp. 190–195.10.1016/j.msea.2011.10.080 ↗