Weld Cracking Susceptibility of High-Cr Ni-Base Fe Alloys and Its Improvement—Development of Novel Test Method for Ductility-Dip Cracking and New Alloy
Source abstract
Abstract
The susceptibility to weld cracking such as ductility-dip cracking (DDC), liquation cracking, and solidification cracking, for laboratory melted high-Cr Ni-base Fe alloys was evaluated by Longi-Varestraint, strain to fracture (STF), on-heating on-cooling hot ductility, five-pass four-layer build-up (FPFLB) and axial tensile preloaded thermal cycling (TPLTC) tests, was compared with commercial Alloy 52. The on-heating on-cooling hot ductility and Longi-Varestraint tests showed similar cracking susceptibility, but they were not so suitable for the evaluation of DDC susceptibility. The DDC susceptibility for various materials was evaluated by the FPFLB, STF, and TPLTC tests, and there are no significant inconsistencies for DDC susceptibility between the results of these tests. The TPLTC test which simulates the thermal history at the DDC detected location in FPFLB test specimen and the restrained stress in multi-pass welded joint was performed using the all weld metal round-notched bar specimens. Evaluation was performed by the number of thermal cycles until rupture. It was confirmed that the TPLTC test method is a novel test method that can be easily performed comparing with FPFLB and STF tests. A Nb and C containing 30 pct Cr Ni-base Fe alloy without Mo is suggested as an advantageous new DDC-resistant weld metal.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. J.N. DuPont, C.V. Robino, and A.R. Marder: Welding J., 1998, vol. 77(10), pp. 417s–431s.
2. G.D. Bengough: J. Inst. Metals, 1912, vol. VII, pp. 123–74.
3. O.F. Hudson: J. Inst. Metals, 1912, vol. VII, pp. 182–83.
4. H.D. Newell: The Performance of 18–8 at High Temperatures. The Book of Stainless Steel, The American Society for Metals, Detroit, 1933, p. 364.
5. H.S. Kalish and F.J. Dunkerley: Trans. Am. Inst. Mining Metall. Eng., 1949, vol. 180, pp. 637–56.
6. R.P. Carreker and R.W. Guard: Am. Inst. Mining Metall. Pet. Eng. Trans., 1956, vol. 206, pp. 178–84.
7. J.W. Pugh: Am. Inst. Mining Metall. Pet. Eng., 1957, vol. 209, pp. 1243–44.
8. F.N. Rhines and P.J. Wray: Trans. Am. Soc. Metals, 1961, vol. 54, pp. 117–28.
9. W.F. Savage and C.D. Lundin: Welding J., 1965, vol. 44(10), pp. 433-s–442-s.
10. W.F. Savage and C.D. Lundin: Welding J., 1966, vol. 44(12), pp. 497-s–503-s.
11. T. Senda, F. Matsuda, G. Takano, K. Watanabe, and T. Matsusaka: Trans. JWS, 1971, vol. 2(2), pp. 141–62.
12. J.C. Lippold: Welding J., 1983, vol. 62(1), pp. 1-s–11-s.
13. J.C. Lippold: Welding J, 1992, vol. 71(1), pp. 1-s–14-s.
14. W. Lin, J.C. Lippold, and W.A. Baeslack: Welding J., 1993, vol. 72(4), pp. 135-s–53-s.
15. W.F. Savage and D.W. Dickinson: Welding J., 1972, vol. 51(11), pp. 555-s–62-s.
16. W.F. Savage, E.F. Nippes, and G.M. Goodwin: Welding J., 1977, vol. 56(4), pp. 245-s–53-s.
17. T. Ogawa and E. Tsunetomi: Welding J., 1982, vol. 61(3), pp. 82–93.
18. D.E. Nelson, W.A. Baeslack, and J.C. Lippold: Welding J., 1987, vol. 66(8), pp. 241-s–50-s.
19. W.A. Baeslack, W.P. Lata, and S.L. West: Welding J., 1988, vol. 67(4), pp. 77-s–87-s.
20. V. Shankar, T.P.S. Gill, S.L. Mannan, and S. Sundaresan: Welding J., 1998, vol. 77(5), pp. 193-s–201-s.
21. P.W. Ramsey, R.A. Keidel, and J.N. Kuhr: Welding J., 1960, vol. 39(5), pp. 219-s–24-s.
22. G.M. Goodwin: Welding J., 1987, vol. 66(2), pp. 33-s–38-s.
23. T. Zacharia: Welding J., 1994, vol. 73(7), pp. 164-s–72-s.
24. T.W. Nelson, J.C. Lippold, W. Lin, and W.A. Baeslack: Welding J., 1997, vol. 76(3), pp. 110-s–19-s.
25. R.S. Brown and J.B. Koch: Welding J., 1978, vol. 57(2), pp. 38-s–42-s.
26. F.S. Warren and M.K. Boris: Welding J., 1966, vol. 45(1), pp. 13-s–25-s.
27. F. Matsuda, H. Nakagawa, S. Minehisa, N. Sakabata, A. Ejima, and K. Nohara: Trans. JWRI, 1984, vol. 13(2), pp. 69–75.
28. C.D. Lundin, W.T. Delong, and D.F. Spond: Welding J., 1976, vol. 55(6), pp. 145-s–51-s.
29. C.D. Lundin, and P.D. Chou: Hot Cracking Susceptibility of Austenitic Stainless Steel Weld Metals, Welding Research Council Bulletin, 289, 1989.
30. N.E. Nissley, M.G. Collins, G. Guaytima, and J.C. Lippold: Welding World, 2013, vol. 46(7–8), pp. 32–40.
31. N.E. Nissley and J.C. Lippold: Welding J., 2003, vol. 82(12), pp. 355–64.
32. N.E. Nissley, J.C. Lippold: Ductility-dip cracking susceptibility of austenitic alloys. Proc. 6th International Trends in Welding Research, ASM International, 2003, pp. 64–69.
33. J.C. Lippold: Recent developments in weldability testing for advanced materials, 2005. Proc. International Conference on Joining of Advanced & Specialty Materials ASM International, 2005.
34. N.E. Nissley and J.C. Lippold: Welding J., 2008, vol. 87(10), pp. 257-s–64-s.
35. F.F. Noecker II. and J.N. DuPont: Welding J., 2009, vol. 88(1), pp. 7-s–19-s.
36. F.F. Noecker II. and J.N. DuPont: Welding J., 2009, vol. 88(3), pp. 62–77.
37. Y. Nakao, K. Shinozaki, T. Ogawa, and H. Sakurai: Trans. Jpn. Welding Soc., 1993, vol. 24(2), pp. 101–06.
38. M.G. Collins and J.C. Lippold: Welding J., 2003, vol. 82(10), pp. 288-s–95-s.
39. M.G. Collins, A.J. Ramirez, and J.C. Lippold: Welding J., 2004, vol. 83(2), pp. 39–49.
40. A.J. Ramirez and J.C. Lippold: Mater. Sci. Eng. A, 2004, vol. 380, pp. 259–71.10.1016/j.msea.2004.03.074 ↗
41. A.J. Ramirez and J.C. Lippold: Mater. Sci. Eng. A, 2004, vol. 380, pp. 245–58.10.1016/j.msea.2004.03.075 ↗
42. N.E. Nissley and J.C. Lippold: Welding J., 2009, vol. 88(6), pp. 131–40.
43. S.L. McCracken, and J.K. Tatman: Comparison of ductility-dip cracking to computer modeling with SysweldTM in a narrow groove multi-pass weld. Proc. of the 2016 ASME Pressure Vessels & Piping Division Conference PVP-2016, July 17–21, Vancouver, BC, Canada, PVP 2016-63846, 2016.
44. S.L. McCracken, and J.K. Tatman: Prediction of ductility-dip cracking in narrow groove welds using computer simulation of strain accumulation. Cracking Phenomena in Welds IV, Springer, pp. 119–41, 2016.10.1007/978-3-319-28434-7_7 ↗
45. R.L. Roche, D. Moulin, and J. Lebey: Practical Analysis of Ratchetting. Nuclear Engineering and Design, 2 July, 1982, pp. 51–66.10.1016/0029-5493(82)90169-8 ↗
46. S.S. Manson: Thermal Stress and Low-Cycle Fatigue, McGraw-Hill, New York, 1966.10.1115/1.3625225 ↗
47. K. Nakane, N. Ohno, M. Tsuda, Y. Yagi, I. Nakagawa, and T. Atsumi: Int. J. Plast., 2008, vol. 24(10), pp. 1819–36.10.1016/j.ijplas.2007.12.008 ↗
48. S.J. Luther and B.T. Alexandrov: Welding J., 2021, vol. 100(1), pp. 27–39.10.29391/2021.100.003 ↗
49. S.J. Luther, B.T. Alexandrov, S.L. McCracken, and J.K. Tatman: J. Manuf. Process., 2022, vol. 79, pp. 767–88.10.1016/j.jmapro.2022.05.027 ↗
50. S. Kiser, R. Zhang, and M. Caruso: New technical data and commercial applications for 30% Cr nickel alloy nuclear welding products 52MSS and 152MSS. Proc. Welding and Repair Technology for Power Plants, Tenth International EPRI Conference, June 26–29, 2012.
51. J.C. Lippold, and N.E. Nissley: Further Investigations of Ductility-Dip Cracking in High Chromium, Ni-base Filler Metals. IIW-IIC-326-06 Quebec City, Canada, 2006.
52. T. Yonezawa: Compr. Nuclear Mater., 2020, vol. 7, pp. 233–66.