journal article·2023-11

Quantifying the Crack-Tip Residual Stress of Nickel-Based Single-Crystal Alloys at the Micron Scale by Focused Ion Beam and Digital Image Correlation

Haoyi Niu, Wei Sun, Rengeng Li, Kesong Miao, Yiping Xia, Chenglu Liu, Xuewen Li, Hao Wu, Qing Liu, Guohua Fan

Publisher page

Abstract

The cracking of nickel-based single-crystal alloys is associated with the residual stress. In this paper, we employed focused ion beam and digital image correlation (FIB-DIC) technology to characterize the crack-tip residual stress at ultrahigh spatial resolution. The repeatability and accuracy of FIB-DIC were validated by experiments and simulations. A direct correlation between residual stress and hardness was established, which provides a new way to prevent cracking through the visualization and control of residual stress.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Non-Destructive Testing Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. T.M. Pollock: Nat. Mater., 2016, vol. 15, pp. 809–15.10.1038/nmat4709 ↗
2. X. An, Y. Mu, J. Liang, J. Li, Y. Zhou, and X. Sun: J. Mater. Sci. Technol., 2022, vol. 127, pp. 177–82.10.1016/j.jmst.2022.01.042 ↗
3. H. Niu, F. Zheng, H. Wang, C. Liu, R. Li, X. Li, H. Wu, Q. Liu, and G. Fan: Metall. Mater. Trans. A, 2023, vol. 54, pp. 777–82.10.1007/s11661-022-06925-6 ↗
4. X. Liang, Y.T. Zhao, D. Ma, Z. Jia, and X. Meng: Mater. Manuf. Process., 2017, vol. 32, pp. 1887–92.10.1080/10426914.2017.1291948 ↗
5. J. Li, X. An, J. Liang, Y. Zhou, and X. Sun: J. Mater. Sci. Technol., 2022, vol. 117, pp. 79–98.10.1016/j.jmst.2021.10.041 ↗
6. J.C. Han and H.C. Chen: J. Propul. Power, 2006, vol. 22, pp. 226–48.10.2514/1.12793 ↗
7. L.M. Wright, J.C. Han, and J. Enhanc: Heat Transf., 2014, vol. 21, pp. 111–40.
8. W. Tang, T. Zhao, R. Dou, and L. Wang: Ceram. Int., 2022, vol. 48, pp. 15218–26.10.1016/j.ceramint.2022.02.052 ↗
9. J. Fan, X. Xu, S. Niu, Y. Zhou, X. Li, Y. Guo, and Y. Luo: J. Eur. Ceram. Soc., 2022, vol. 42, pp. 4388–95.10.1016/j.jeurceramsoc.2022.03.059 ↗
10. J.E. Kanyo, S. Schafföner, R.S. Uwanyuze, and K.S. Leary: J. Eur. Ceram. Soc., 2020, vol. 40, pp. 4955–73.10.1016/j.jeurceramsoc.2020.07.013 ↗
11. R. Yi, C. Chen, C. Shi, Y. Li, H. Li, and Y. Ma: Ceram. Int., 2021, vol. 47, pp. 20807–20.10.1016/j.ceramint.2021.04.220 ↗
12. X.Y. Tian, J.C. Feng, J.M. Shi, H.W. Li, and L.X. Zhang: Ceram. Int., 2015, vol. 41, pp. 145–53.10.1016/j.ceramint.2014.08.051 ↗
13. J.W. Park, P.F. Mendez, and T.W. Eagar: Acta Mater., 2002, vol. 50, pp. 883–99.10.1016/S1359-6454(01)00352-4 ↗
14. A. Morançais, M. Fèvre, M. François, N. Guel, S. Kruch, P. Kanouté, and A. Longuet: J. Appl. Crystallogr., 2015, vol. 48, pp. 1761–76.10.1107/S1600576715017689 ↗
15. Y. Geng, X. Dong, K. Wang, X. Mei, Z. Tang, and W. Duan: Opt. Laser Technol., 2020, vol. 123, p. 105917.10.1016/j.optlastec.2019.105917 ↗
16. M. Liu, Q. Zheng, X. Wang, and C. Xu: Mech. Mater., 2022, vol. 164, p. 104143.10.1016/j.mechmat.2021.104143 ↗
17. R.M.N. Fleury, E. Salvati, D. Nowell, A.M. Korsunsky, F. Silva, and Y.H. Tai: Int. J Fatigue, 2019, vol. 119, pp. 34–42.10.1016/j.ijfatigue.2018.09.024 ↗
18. E. Salvati, A.J.G. Lunt, C.P. Heason, G.J. Baxter, and A.M. Korsunsky: Mater. Des., 2020, vol. 191, p. 108605.10.1016/j.matdes.2020.108605 ↗
19. J. Chen, E. Salvati, F. Uzun, C. Papadaki, Z. Wang, J. Everaerts, A.M. Korsunsky, and J. Manuf: Process., 2020, vol. 53, pp. 190–200.
20. E. Salvati, A.J.G. Lunt, S. Ying, T. Sui, H.J. Zhang, C. Heason, G. Baxter, and A.M. Korsunsky: Comput. Methods Appl. Mech. Engrg., 2017, vol. 320, pp. 335–51.10.1016/j.cma.2017.03.005 ↗
21. J. Everaerts, E. Salvati, F. Uzun, L. Romano Brandt, H. Zhang, and A.M. Korsunsky: Acta Mater., 2018, vol. 156, pp. 43–51.10.1016/j.actamat.2018.06.035 ↗
22. J. Everaerts, H. Li, W. Li, and A.M. Korsunsky: Scr. Mater., 2023, vol. 235, p. 115634.10.1016/j.scriptamat.2023.115634 ↗
23. D. Fukui, N. Nakada, and S. Onaka: Acta Mater., 2020, vol. 196, pp. 660–68.10.1016/j.actamat.2020.07.013 ↗
24. A.J.G. Lunt, N. Baimpas, E. Salvati, I.P. Dolbnya, T. Sui, S. Ying, H. Zhang, A.K. Kleppe, J. Dluhoš, and A.M. Korsunsky: J. Strain. Anal. Eng. Des., 2015, vol. 50, pp. 426–44.10.1177/0309324715596700 ↗
25. A.J.G. Lunt and A.M. Korsunsky: Surf. Coat. Technol., 2015, vol. 283, pp. 373–88.10.1016/j.surfcoat.2015.10.049 ↗
26. E. Salvati, L. Romano-Brandt, M.Z. Mughal, M. Sebastiani, and A.M. Korsunsky: J. Mech. Phys. Solids, 2019, vol. 125, pp. 488–501.10.1016/j.jmps.2019.01.007 ↗
27. E. Salvati, T. Sui, and A.M. Korsunsky: Int. J. Solids Struct., 2016, vol. 87, pp. 61–69.10.1016/j.ijsolstr.2016.02.031 ↗
28. E. Salvati, S. O’Connor, T. Sui, D. Nowell, and A.M. Korsunsky: Eng. Fract. Mech., 2016, vol. 167, pp. 210–23.10.1016/j.engfracmech.2016.04.034 ↗
29. E. Salvati, T. Sui, A.J.G. Lunt, and A.M. Korsunsky: Mater. Des., 2016, vol. 92, pp. 649–58.10.1016/j.matdes.2015.12.015 ↗
30. A.M. Korsunsky, M. Sebastiani, and E. Bemporad: Surf. Coat. Technol., 2010, vol. 205, pp. 2393–403.10.1016/j.surfcoat.2010.09.033 ↗
31. A.J.G. Lunt, E. Salvati, L. Ma, I.P. Dolbyna, T.K. Neo, and A.M. Korsunsky: J. Mech. Phys. Solids, 2016, vol. 94, pp. 47–67.10.1016/j.jmps.2016.03.013 ↗
32. Y. Su and Q. Zhang: Opt. Lasers Eng., 2022, vol. 148, p. 106766.10.1016/j.optlaseng.2021.106766 ↗
33. B. Zhu, Y. Wang, J. Dluhoš, A.J. London, M. Gorley, M.J. Whiting, and T. Sui: Sci. Adv., 2022, vol. 8, p. eabl4592.10.1126/sciadv.abl4592 ↗
34. S. Haratian, F. Niessen, F.B. Grumsen, M.J.B. Nancarrow, E.V. Pereloma, M. Villa, T.L. Christiansen, and M.A.J. Somers: Acta Mater., 2020, vol. 200, pp. 674–85.10.1016/j.actamat.2020.09.049 ↗
35. A.M. Korsunsky, E. Salvati, A.G.J. Lunt, T. Sui, M.Z. Mughal, R. Daniel, J. Keckes, E. Bemporad, and M. Sebastiani: Mater. Des., 2018, vol. 145, pp. 55–64.10.1016/j.matdes.2018.02.044 ↗
36. Y.C. Lin and C.Y. Wang: J. Alloys Compd., 2020, vol. 838, p. 155141.10.1016/j.jallcom.2020.155141 ↗
37. T.Y. Tsui, W.C. Oliver, and G.M. Pharr: J. Mater. Res., 1996, vol. 11, pp. 752–59.10.1557/JMR.1996.0091 ↗
38. S. Suresh and A.E. Giannakopoulos: Acta Mater., 1998, vol. 46, pp. 5755–67.10.1016/S1359-6454(98)00226-2 ↗
39. S. Gao, S. Geng, P. Jiang, C. Han, and L. Ren: Opt. Laser Technol., 2022, vol. 146, p. 107580.10.1016/j.optlastec.2021.107580 ↗