An Integrated Simulation of Multiple-Pass U-10Mo Alloy Hot Rolling and Static Recrystallization
Source abstract
Abstract
Abstract To achieve a desired microstructure and minimize the thickness variation in rolled foils, researchers must understand the effects of foil fabrication process variables on microstructure evolution. We developed an integrated simulation of deformation and recrystallization that employs the finite element method (FEM) and the kinetic Monte Carlo (KMC) Potts model, respectively, to investigate microstructure evolution during multiple-pass hot rolling and heat treatment in polycrystalline U-10Mo fuel. Scanning electron microscopy and electron backscatter diffraction images of microstructures were directly used as input in FEM calculation of deformation, and the calculated strains were used to determine the driving force of nucleation and growth of recrystallized grains in the Potts model. Grain structures predicted by the Potts model were used to update the grain structure and material properties for FEM. Simulation alternated between FEM and the Potts model to simulate grain structure evolution during multiple rolling and heat treatments. The initial model parameters were determined by benchmarking the recrystallization kinetics against experimental data. Then, the model was applied to predict the grain structure evolution. Results showed that our model can capture the coupling between deformation and recrystallization and can quantitatively reproduce the observed U-10Mo recrystallization and grain growth kinetics. The simulation results demonstrated that the developed model can predict U-10Mo grain structures as a function of initial microstructure and foil fabrication parameters.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · High Temperature Alloys and Creep · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. J. Jue, T.L. Trowbridge, C.R. Breckenridge, G.A. Moore, M.K. Meyer, and D.D. Keiser: J. Nucl. Mater., 2015, vol. 460, pp. 153–59.10.1016/j.jnucmat.2015.02.017 ↗
2. A.J. Clarke, K.D. Clarke, R.J. McCabe, C.T. Necker, P.A. Papin, R.D. Field, A.M. Kelly, T.J. Tucker, R.T. Forsyth, P.O. Dickerson, J.C. Foley, H. Swenson, R.M. Aikin, and D.E. Dombrowski: J. Nucl. Mater., 2015, vol. 465, pp. 784–92.10.1016/j.jnucmat.2015.07.004 ↗
3. S. Hu, V. Joshi, and C.A. Lavender: J. Miner. Met. Mater. Soc., 2017, vol. 69, pp. 2554–562.10.1007/s11837-017-2611-4 ↗
4. L. Liang, Z.G. Mei, Y.S. Kim, B. Ye, G. Hofman, M. Anitescu, and A.M. Yacout: Comput. Mater. Sci., 2016, vol. 124, pp. 228–37.10.1016/j.commatsci.2016.07.033 ↗
5. L. Liang, Z.G. Mei, and A.M. Yacout: Comput. Mater. Sci., 2017, vol. 138, pp. 16–26.10.1016/j.commatsci.2017.06.013 ↗
6. Z. Xu, V. Joshi, S. Hu, D. Paxton, C. Lavender, and D. Burkes: J. Nucl. Mater., 2016, vol. 471, pp. 154–64.10.1016/j.jnucmat.2015.11.026 ↗
7. W.E. Frazier, S. Hu, D.E. Burkes, and B.W. Beeler: J. Nucl. Mater., 2019, vol. 524, pp. 164–76.10.1016/j.jnucmat.2019.07.004 ↗
8. E.A. Nyberg, V.V. Joshi, C.A. Lavender, D.M. Paxton, and D.E. Burkes: The Influence of Casting Conditions on the Microstructure of As-Cast U-10Mo Alloys: Characterization of the Casting Process Baseline. PNNL-23049, Pacific Northwest National Laboratory, Richland, WA, 2013. https://doi.org/10.2172/116344410.2172/1163444 ↗
9. L. Li, A. Fortier, D.R. Tamayo, V.V. Joshi, and A. Soulami: Mate. Today Commun., 2022, vol. 32, p. 103910.
10. W.E. Frazier, S. Hu, N. Overman, C. Lavender, and V.V. Joshi: J. Nucl. Mater., 2018, vol. 498, pp. 254–58.10.1016/j.jnucmat.2017.10.041 ↗
11. R.P. De Siqueira, H.R.Z. Sandim, and D. Raabe: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 469–78.10.1007/s11661-012-1408-x ↗
12. W. Xu, M. Ferry, J.M. Cairney, and F.J. Humphreys: Acta Mater., 2007, vol. 55, pp. 5157–167.10.1016/j.actamat.2007.05.045 ↗
13. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd., Oxford, 2004, pp. 287–304.
14. K. Huang and R.E. Logé: Mater. Des., 2016, vol. 111, pp. 548–74. https://doi.org/10.1016/j.matdes.2016.09.012.10.1016/j.matdes.2016.09.012 ↗
15. S.A. Humphry-Baker and C.A. Schuh: J. Appl. Phys., 2014, vol. 116, p. 17305. https://doi.org/10.1063/1.4901235.10.1063/1.4901235 ↗
16. R.L. Goetz: Scripta Mater., 2005, vol. 52, pp. 851–56.10.1016/j.scriptamat.2005.01.012 ↗
17. F.J. Humphreys and P.N. Kalu: Acta Metall., 1987, vol. 35, pp. 2815–829.10.1016/0001-6160(87)90281-1 ↗
18. C. Zheng, N. Xiao, D. Li, and Y. Li: Comput. Mater. Sci., 2008, vol. 44, pp. 507–14.10.1016/j.commatsci.2008.04.010 ↗
19. F. Chen, K. Qi, Z. Cui, and X. Lai: Comput. Mater. Sci., 2014, vol. 83, pp. 331–40.10.1016/j.commatsci.2013.11.029 ↗
20. C. Haase, M. Kühbach, L.A. Barrales-Mora, S. Leen, F. Roters, D.A. Molodov, and G. Gottstein: Acta Mater., 2015, https://doi.org/10.1016/j.actamat.2015.08.057.10.1016/j.actamat.2015.08.057 ↗
21. D.K. Kim, W. Woo, W.W. Park, Y.T. Im, and A. Rollett: Comput. Mater. Sci., 2017, vol. 129, pp. 55–65.10.1016/j.commatsci.2016.11.048 ↗
22. D. Raabe and L. Hantcherli: Comput. Mater. Sci., 2005, https://doi.org/10.1016/j.commatsci.2004.12.067.10.1016/j.commatsci.2004.12.067 ↗
23. P. Zhao, T.S.E. Low, Y. Wang, and S.R. Niezgoda: Int. J. Plast., 2016, vol. 80, pp. 38–55.10.1016/j.ijplas.2015.12.010 ↗
24. X. Li, X. Li, H. Zhou, X. Zhou, F. Li, and Q. Liu: Comput. Mater. Sci., 2017, vol. 140, pp. 95–104. https://doi.org/10.1016/j.commatsci.2017.08.039.10.1016/j.commatsci.2017.08.039 ↗
25. K. Adam, J.M. Root, Z. Long, and D.P. Field: J. Mater. Eng. Perform., 2017, vol. 26, pp. 207–13.10.1007/s11665-016-2436-2 ↗
26. K.F. Adam, Z. Long, and D.P. Field: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2062–076.10.1007/s11661-017-3967-3 ↗
27. K. Adam, D. Zöllner, and D.P. Field: Model. Simul. Mater. Sci. Eng., 2018, vol. 26, p. 035011. https://doi.org/10.1088/1361-651X/aaa146.10.1088/1361-651X/aaa146 ↗
28. Z.C. Sun, H.L. Wu, J. Cao, and Z.K. Yin: Int. J. Plast., 2018, vol. 106, pp. 73–87. https://doi.org/10.1016/j.ijplas.2018.03.002.10.1016/j.ijplas.2018.03.002 ↗
29. M.A. Steiner, R.J. McCabe, E. Garlea, and S.R. Agnew: J. Nucl. Mater., 2017, vol. 492, pp. 74–87. https://doi.org/10.1016/j.jnucmat.2017.04.026.10.1016/j.jnucmat.2017.04.026 ↗
30. M.G. Llorens, A. Griera, P.D. Bons, R.A. Lebensohn, L.A. Evans, D. Jansen, and I. Weikusat: Earth Planet. Sci. Lett., 2016, vol. 450, pp. 233–42. https://doi.org/10.1016/j.epsl.2016.06.045.10.1016/j.epsl.2016.06.045 ↗
31. S.F. Li, J. Lind, C.M. Hefferan, R. Pokharel, U. Lienert, A.D. Rollett, and R.M. Suter: J. Appl. Crystallogr., 2012, vol. 45, pp. 1098–108.10.1107/S0021889812039519 ↗
32. A. Cerrone, C. Stein, R. Pokharel, C. Hefferan, J. Lind, H. Tucker, R. Suter, A. Rollett, and A. Ingraffea: Model. Simul. Mater. Sci. Eng., 2015, https://doi.org/10.1088/0965-0393/23/3/035006.10.1088/0965-0393/23/3/035006 ↗
33. M. Zehetbauer, T. Ungár, R. Kral, A. Borbély, E. Schafler, B. Ortner, H. Amenitsch, and S. Bernstorff: Acta Mater., 1999, vol. 47, pp. 1053–061.10.1016/S1359-6454(98)00366-8 ↗
34. A.C. Leff, C.R. Weinberger, and M.L. Taheri: Ultramicroscopy, 2015, vol. 153, pp. 9–21. https://doi.org/10.1016/j.ultramic.2015.02.002.10.1016/j.ultramic.2015.02.002 ↗
35. J. Jiang, T. Ben Britton, and A.J. Wilkinson: Int. J. Plast., 2015, vol. 69, pp. 102–17.10.1016/j.ijplas.2015.02.005 ↗
36. P.D. Littlewood and A.J. Wilkinson: Acta Mater., 2012, vol. 60, pp. 5516–525.10.1016/j.actamat.2012.07.003 ↗
37. W.Z. Abuzaid, M.D. Sangid, J.D. Carroll, H. Sehitoglu, and J. Lambros: J. Mech. Phys. Solids, 2012, vol. 60, pp. 1201–220. https://doi.org/10.1016/j.jmps.2012.02.001.10.1016/j.jmps.2012.02.001 ↗
38. D.B. Needleman, H. Choil, D.M. Powell, and T. Buonassisi: Physica Status Solidi Rapid Res. Lett., 2013, vol. 7, pp. 1041–044. https://doi.org/10.1002/pssr.201308150.10.1002/pssr.201308150 ↗
39. S. Woo, M. Bertoni, K. Choi, S. Nam, S. Castellanos, D.M. Powell, T. Buonassisi, and H. Choi: Sol. Energy Mater. Sol. Cells, 2016, vol. 155, pp. 88–100. https://doi.org/10.1016/j.solmat.2016.03.040.10.1016/j.solmat.2016.03.040 ↗
40. T. Takaki and Y. Tomita: Int. J. Mech. Sci., 2010, vol. 52, pp. 320–28.10.1016/j.ijmecsci.2009.09.037 ↗
41. M. Jafari, M. Jamshidian, S. Ziaei-Rad, D. Raabe, and F. Roters: Int. J. Plast., 2017, vol. 99, pp. 19–42.10.1016/j.ijplas.2017.08.004 ↗
42. H. Zhang, J. Liu, D. Sui, Z. Cui, and M.W. Fu: Int. J. Plast., 2018, vol. 100, pp. 69–89. https://doi.org/10.1016/j.ijplas.2017.09.011.10.1016/j.ijplas.2017.09.011 ↗
43. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe: Acta Mater., 2010, vol. 58, pp. 1152–211.10.1016/j.actamat.2009.10.058 ↗
44. T. Takaki, Y. Hisakuni, T. Hirouchi, A. Yamanaka, and Y. Tomita: Multi-Phase-Field Simulations for Dynamic Recrystallization, vol. 45, Elsevier B.V., Amsterdam, 2009.
45. X.H. Hu, D.S. Wilkinson, M. Jain, P.D. Wu, and R.K. Mishra: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2002–016.10.1016/j.msea.2010.11.051 ↗
46. X. Hu, D.S. Wilkinson, M. Jain, and R.K. Mishra: Int. J. Solids Struct., 2009, vol. 46, pp. 2650–658.10.1016/j.ijsolstr.2009.02.012 ↗
47. X. Hu, X. Wang, V.V. Joshi, and C.A. Lavender: J. Nucl. Mater., 2018, vol. 500, pp. 270–79.10.1016/j.jnucmat.2017.12.042 ↗
48. G. Cheng, X. Hu, W.E. Frazier, C.A. Lavender, and V.V. Joshi: Mater. Sci. Eng. A, 2018, vol. 736, pp. 41–52.10.1016/j.msea.2018.08.040 ↗
49. E. Miyoshi, T. Takaki, M. Ohno, Y. Shibuta, S. Sakane, T. Shimokawabe, and T. Aoki: npj Comput. Mater., 2017, https://doi.org/10.1038/s41524-017-0029-8.10.1038/s41524-017-0029-8 ↗
50. B. Scholtes, R. Boulais-Sinou, A. Settefrati, D. Pino, I. Poitrault, A. Montouchet, N. Bozzolo, and M. Bernacki: Comput. Mater. Sci., 2016, vol. 122, pp. 57–71.10.1016/j.commatsci.2016.04.045 ↗
51. O. Beltran, K. Huang, and R.E. Logé: Comput. Mater. Sci., 2015, vol. 102, pp. 293–303.10.1016/j.commatsci.2015.02.043 ↗
52. E.A. Holm, T.D. Hoffmann, A.D. Rollett, and C.G. Roberts: IOP Conf. Ser.: Mater. Sci. Eng., 2015, vol. 89, p. 012005.10.1088/1757-899X/89/1/012005 ↗
53. W. Frazier, C. Wang, Z. Xu, and N. Overman: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 533–44.10.1007/s11661-019-05582-6 ↗
54. P.E. Goins and E.A. Holm: Comput. Mater. Sci., 2016, vol. 124, pp. 411–19.10.1016/j.commatsci.2016.08.017 ↗
55. G.B. Sarma, B. Radhakrishnan, and T. Zacharia: Acta Mater., 1998, vol. 46, pp. 4415–433.10.1016/S1359-6454(98)00077-9 ↗
56. A.E. Dwight: J. Nucl. Mater., 1960, vol. 2, pp. 81–7.10.1016/0022-3115(60)90028-3 ↗
57. M. Tokar, A.W. Nutt, and J.A. Leary: Mechanical Properties of Carbide and Nitride Reactor Fuels, LA-4452, Los Alamos National Laboratory, Los Alamos, NM, 1970.10.2172/4100394 ↗
58. W. Frazier, C. Wang, Z. Xu, N. Overman, S. Hu, and V.V. Joshi: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 533–44.10.1007/s11661-019-05582-6 ↗
59. X.H. Hu, M. Jain, D.S. Wilkinson, and R.K. Mishra: Acta Mater., 2008, vol. 56, pp. 3187–201.10.1016/j.actamat.2008.02.048 ↗
60. J. Rest, Y.S. Kim, and G.L. Holmes: U-Mo Fuels Handbook, Version 1.0, Argonne National Laboratory, 2006.10.2172/1335129 ↗
61. S.A. Safran, P.S. Sahni, and G.S. Grest: Phys. Rev. B, 1983, vol. 28, pp. 2693–704.10.1103/PhysRevB.28.2693 ↗
62. E.A. Holm and G.N. Hassold: Comput. Phys., 1993, vol. 7, pp. 97–207.10.1063/1.168481 ↗
63. D. Raabe: Acta Mater., 2000, vol. 48, pp. 1617–628.10.1016/S1359-6454(99)00451-6 ↗
64. A.D. Rollett, D.J. Srolovitz, M.P. Anderson, and R.D. Doherty: Acta Metall. Mater., 1992, vol. 40, pp. 3475–495.10.1016/0956-7151(92)90062-J ↗
65. B.L. DeCost, H. Jain, A.D. Rollett, and E.A. Holm: JOM, 2017, vol. 69, pp. 456–65.10.1007/s11837-016-2226-1 ↗
66. A. Rollett: Prog. Mater. Sci., 1997, vol. 42, pp. 79–99.10.1016/S0079-6425(97)00008-X ↗
67. A. Williamson and J. Delplanque: Comput. Mater. Sci., 2016, vol. 124, pp. 114–29.10.1016/j.commatsci.2016.07.025 ↗
68. B.J. Schuessler, D.P. Field, N.R. Overman, and V.V. Joshi: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 3871–879.10.1007/s11661-021-06349-8 ↗
69. D. Zöllner: Comput. Mater. Sci., 2014, vol. 86, pp. 99–107.10.1016/j.commatsci.2014.01.044 ↗
70. P.S. Sahni, D.J. Srolovitz, G.S. Grest, M.P. Anderson, and S.A. Safran: Phys. Rev. B, 1983, vol. 28, pp. 2705–716.10.1103/PhysRevB.28.2705 ↗
71. W.E. Frazier, S. Hu, N. Overman, R. Prabhakaran, C. Lavender, and V.V. Joshi: J. Nucl. Mater., 2019, vol. 513, pp. 56–61.10.1016/j.jnucmat.2018.10.046 ↗
72. K. Kalia, W.E. Frazier, D.P. Field, and V.V. Joshi: Journal of Physics Conference Series, IOP Publishing, Ghent, 2019.
73. J.I. Reeve, B.J. Schuessler, W.E. Frazier, D.P. Field, and V.V. Joshi: J. Nucl. Mater., 2022, vol. 559, p. 153445. https://doi.org/10.1016/j.jnucmat.2021.153445.10.1016/j.jnucmat.2021.153445 ↗
74. K. Kalia: Masters Thesis, Washington State University, 2017.
75. C. Wang, A. Soulami, Z. Xu, G. Cheng, S. Hu, D. Burkes, W.E. Frazier, K.S. Choi, X. Wang, X. Hu, C.A. Lavender, and V.V. Joshi: Process Modeling of U-10wt % Mo Alloys Using Integrated Computational Materials Engineering, PNNL-28640, Pacific Northwest National Laboratory, Richland, WA, 2019.10.2172/1518489 ↗
76. C. Moussa, M. Bernacki, R. Besnard, and N. Bozzolo: IOP Conf. Ser.: Mater. Sci. Eng., 2015, vol. 89, p. 012038.10.1088/1757-899X/89/1/012038 ↗
77. M. Kamaya: Ultramicroscopy, 2011, vol. 111, pp. 1189–199.10.1016/j.ultramic.2011.02.004 ↗
78. P.O. Malta, D.S. Alves, A.O.V. Ferreira, I.D. Moutinho, C.A.P. Dias, and D.B. Santos: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1288–309.10.1007/s11661-016-3935-3 ↗
79. Z. Jin and Z. Cui: Comput. Mater. Sci., 2012, vol. 63, pp. 249–55.10.1016/j.commatsci.2012.06.028 ↗
80. M.S. Salehi and S. Serajzadeh: Comput. Mater. Sci., 2012, vol. 53, pp. 145–52.10.1016/j.commatsci.2011.09.026 ↗
81. P. Zhao, T. Song En Low, Y. Wang, and S.R. Niezgoda: Int. J. Plast., 2016, vol. 80, pp. 38–55.10.1016/j.ijplas.2015.12.010 ↗
82. L. Chen, J. Chen, R.A. Lebensohn, Y.Z. Ji, T.W. Heo, S. Bhattacharyya, K. Chang, S. Mathaudhu, Z.K. Liu, and L.Q. Chen: Comput. Methods Appl. Mech. Eng., 2015, vol. 285, pp. 829–48.10.1016/j.cma.2014.12.007 ↗
83. M. Bernacki, R.E. Logé, and T. Coupez: Scripta Mater., 2011, vol. 64, pp. 525–28.10.1016/j.scriptamat.2010.11.032 ↗
84. P.R. Rios, F. Siciliano Jr., H.R.Z. Sandim, R.L. Plaut, and A.F. Padilha: Mater. Res., 2005, vol. 8, pp. 225–38.10.1590/S1516-14392005000300002 ↗
85. C.S. Smith: Trans. Am. Inst. Min. Eng., 1948, vol. 175, pp. 15–51.
86. P.A. Manohar, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913–24.10.2355/isijinternational.38.913 ↗
87. W.E. Frazier, S. Hu, N. Overman, C. Lavender, and V.V. Joshi: J. Nucl. Mater., 2019, vol. 526, 151763.10.1016/j.jnucmat.2019.151763 ↗
88. F. Zhang, D. Liu, and Y. Yang: Model. Simul. Mater. Sci. Eng., 2019, vol. 27, p. 035002.
89. J.J. Sidor, K. Decroos, R.H. Petrov, and L.A.I. Kestens: Int. J. Plast., 2015, vol. 66, pp. 119–37.10.1016/j.ijplas.2014.08.009 ↗
90. E. Fjeldberg and K. Marthinsen: Comput. Mater. Sci., 2010, vol. 48, pp. 267–81.10.1016/j.commatsci.2010.01.007 ↗
91. A.L.M. Alves, E. Villa, and P.R. Rios: Acta Mater., 2017, vol. 131, pp. 523–33.10.1016/j.actamat.2017.03.078 ↗