Evolution of Microstructure and Crystallographic Texture During Welding for 1.5 GPa Ultra-high Strength Steel Toughened by an Elongated Grain Structure With Intensive Texture
Source abstract
Abstract
The advanced microstructure of the elongated grain structure with intensive texture, which mainly consists of (left{ {112} ight}leftlangle {110} ight anglealpha ,{ ext{and}},left{ {332} ight}leftlangle {113} ight anglealpha ) components, significantly improves the toughness of 1.5 GPa ultra-high strength steel by delamination toughening. The elongated grain structure with texture affects the microstructure evolution of heat affected zone (HAZ), resulting in the refinement of coarse-grained HAZ(CGHAZ), the separate distribution of granular bainite and lath martensite in fine-grained HAZ (FGHAZ) and the formation of clustered blocky martensite in intercritical HAZ (ICHAZ). In ICHAZ, the sharp (left{ {112} ight}leftlangle {100} ight anglealpha ) of untransformed grains does not undergo reorientation for high thermal stability. For transformed grains, initial (left{ {112} ight}leftlangle {110} ight anglealpha ,{ ext{and}},left{ {332} ight}leftlangle {113} ight anglealpha ) components are reproduced by texture heredity. However, with the increase of peak temperature, the heredity tendency of texture weakens, causing the reduction of texture intensity. In CGHAZ, the Goss and (left{ {112} ight}leftlangle {110} ight anglealpha ) texture are obtained because of grains oriented growth. It is found that serious and heterogenous HAZ softening is a significant feature. FGHAZ becomes the weakest zone due to the massive formation of granular bainite. Due to the disappearance of (,left{ {332} ight}leftlangle {113} ight anglealpha ) and the formation of Goss texture, CGHAZ shows the least modulus.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Z.B. Jiao, J.H. Luan, M.K. Miller, Y.W. Chung, and C.T. Liu: Mater. Today., 2017, vol. 20, pp. 142–54. https://doi.org/10.1016/j.mattod.2016.07.002.10.1016/j.mattod.2016.07.002 ↗
2. L. Liu, Q. Yu, Z. Wang, J. Ell, and R.O. Ritchie: Science, 2020, vol. 368, pp. 1347–52. https://doi.org/10.1126/science.aba9413.10.1126/science.aba9413 ↗
3. J. Sun, H. Wang, B. Xu, L. Jiang, S. Guo, X. Sun, D. Yu, F. Liu, and Y. Liu: Acta. Mater., 2022, vol. 227, p. 117701. https://doi.org/10.1016/j.actamat.2022.117642.10.1016/j.actamat.2022.117642 ↗
4. Y. Kimura, T. Inoue, F. Yin, and K. Tsuzaki: Science, 2008, vol. 320, pp. 1057–60. https://doi.org/10.1126/science.1156084.10.1126/science.1156084 ↗
5. X. Shen, D.Z. Li, S. Tang, J. Chen, H. Fang, and G. Wang: Mater. Sci. Eng. A, 2019, vol. 766, p. 138342. https://doi.org/10.1016/j.msea.2019.138342.10.1016/j.msea.2019.138342 ↗
6. J. Kang, C. Li, G. Yuan, and G. Wang: Mater. Lett., 2016, vol. 175, pp. 157–60. https://doi.org/10.1016/j.matlet.2016.04.007.10.1016/j.matlet.2016.04.007 ↗
7. M. Tümer, C. Schneider-Bröskamp, and N. Enzinger: J. Manuf. Process., 2022, vol. 82, pp. 203–29. https://doi.org/10.1016/j.jmapro.2022.07.049.10.1016/j.jmapro.2022.07.049 ↗
8. S.H.M. Anijdan, M. Aghaie-Khafri, H.R. Jafarian, and A.R. Khoshakhlagh: Sci. Technol. Weld. Join., 2017, vol. 23, pp. 387–93. https://doi.org/10.1080/13621718.2017.1401337.10.1080/13621718.2017.1401337 ↗
9. P. Yan, Ö.E. Guüngör, P. Thibaux, and H.K.D.H. Bhadeshia: Sci. Technol. Weld. Join., 2013, vol. 15, pp. 137–41. https://doi.org/10.1179/136217109X12568132624163.10.1179/136217109X12568132624163 ↗
10. S. Mitra, K.S. Arora, B. Bhattacharya, and S.B. Singh: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2915–26. https://doi.org/10.1007/s11661-020-05747-8.10.1007/s11661-020-05747-8 ↗
11. J. Capek, M. Cernik, N. Ganev, K. Trojan, J. Nemecek, and K. Kolarik: IOP Conf. Ser., 2018, vol. 375, p. 012025. https://doi.org/10.1088/1757-899x/375/1/012025.10.1088/1757-899x/375/1/012025 ↗
12. S. Mandal, N.K. Tewary, S.K. Ghosh, D. Chakrabarti, and S. Chatterjee: Mater. Sci. Eng. A, 2016, vol. 663, pp. 126–40. https://doi.org/10.1016/j.msea.2016.03.127.10.1016/j.msea.2016.03.127 ↗
13. R. Badji, B. Cheniti, C. Kahloun, T. Chauveau, M. Hadji, and B. Bacroix: Int. J. Adv. Manuf. Technol., 2021, vol. 116, pp. 1115–32. https://doi.org/10.1007/s00170-021-07502-8.10.1007/s00170-021-07502-8 ↗
14. G. He, T. Peng, B. Jiang, X. Hu, Y. Liu, and C. Wu: Steel. Res. Int., 2021, vol. 92, p. 2100047. https://doi.org/10.1002/srin.202100047.10.1002/srin.202100047 ↗
15. R. Song, D. Ponge, D. Raabe, and R. Kaspar: Acta. Mater., 2005, vol. 53, pp. 845–58. https://doi.org/10.1016/j.actamat.2004.10.051.10.1016/j.actamat.2004.10.051 ↗
16. S. Takajo, C.C. Merriman, S.C. Vogel, and D.P. Field: Acta. Mater., 2019, vol. 166, pp. 100–12. https://doi.org/10.1016/j.actamat.2018.11.054.10.1016/j.actamat.2018.11.054 ↗
17. H. Cao, X. Luo, G. Zhan, and S. Liu: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4403–10. https://doi.org/10.1007/s11661-017-4200-0.10.1007/s11661-017-4200-0 ↗
18. M. Niu, G. Zhou, W. Wang, M.B. Shahzad, Y. Shan, and K. Yang: Acta. Mater., 2019, vol. 179, pp. 296–307. https://doi.org/10.1016/j.actamat.2019.08.042.10.1016/j.actamat.2019.08.042 ↗
19. W. Hou, Q. Liu, H. Wen, and J. Gu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 3981–4039. https://doi.org/10.1007/s11661-020-05811-3.10.1007/s11661-020-05811-3 ↗
20. X. Zhang, X. Di, W. Jing, X. Zhou, C. Zhang, and C. Li: Steel. Res. Int., 2022, vol. 93, p. 2100776. https://doi.org/10.1002/srin.202100776.10.1002/srin.202100776 ↗
21. M. Amraei, S. Afkhami, V. Javaheri, J. Larkiola, T. Skriko, T. Björk, and X.L. Zhao: Thin. Wall. Struct., 2020, vol. 157, p. 107072. https://doi.org/10.1016/j.engstruct.2019.109460.10.1016/j.engstruct.2019.109460 ↗
22. X. Di, M. Tong, C. Li, C. Zhao, and D.P. Wang: Mater. Sci. Eng. A, 2019, vol. 743, pp. 67–76. https://doi.org/10.1016/j.msea.2018.11.070.10.1016/j.msea.2018.11.070 ↗
23. R.K. Ray and J.J. Jonas: Int. Mater. Rev., 1990, vol. 35, pp. 1–36. https://doi.org/10.1179/095066090790324046.10.1179/095066090790324046 ↗
24. D. Zhuang, L. Wang, Y. Huang, X. Li, H. Zhang, and D. Ren: J. Iron. Steel. Res. Int., 2017, vol. 24, pp. 84–90. https://doi.org/10.1016/S1006-706X(17)30012-2.10.1016/S1006-706X(17)30012-2 ↗
25. G. Niu, H.S. Zurob, R.D. Misra, Q. Tang, Z. Zhang, M.T. Nguyen, L. Wang, H. Wu, and Y. Zou: Acta. Mater., 2022, vol. 226, p. 117642. https://doi.org/10.1016/j.actamat.2022.117642.10.1016/j.actamat.2022.117642 ↗
26. M. Baek, K. Kim, T. Park, J. Ham, and K. Lee: Mater. Sci. Eng. A, 2020, vol. 785, p. 139375. https://doi.org/10.1016/j.msea.2020.139375.10.1016/j.msea.2020.139375 ↗
27. A. Elramady, E. Sullivan, K. Sham, L. O’Brien, and S. Liu: Weld. World., 2021, vol. 66, pp. 195–211. https://doi.org/10.1007/s40194-021-01216-x.10.1007/s40194-021-01216-x ↗
28. S. Afkhami, V. Javaheri, M. Amraei, T. Skriko, H. Piili, X.L. Zhao, and T. Björk: Mater. Design., 2022, vol. 213, p. 110336. https://doi.org/10.1016/j.matdes.2021.110336.10.1016/j.matdes.2021.110336 ↗
29. C. Fang, C. Li, F. Ji, W. Fu, W. Hu, and X. Di: Materials, 2023, vol. 16, p. 550. https://doi.org/10.3390/ma16020550.10.3390/ma16020550 ↗
30. F. Fang, Y. Zhao, L. Zhou, X. Hu, Z. Xie, and J. Jiang: Mater. Sci. Eng. A, 2014, vol. 618, pp. 505–10. https://doi.org/10.1016/j.msea.2014.09.061.10.1016/j.msea.2014.09.061 ↗
31. S. Danilov, I. Semkina, I. Pyshmintsev, and M. Lobanov: IOP Conf. Ser., 2019, vol. 613, pp. 8–12. https://doi.org/10.1088/1757-899x/613/1/012006.10.1088/1757-899x/613/1/012006 ↗
32. M.L. Lobanov, I.Y. Pyshmintsev, V.N. Urtsev, S.V. Danilov, N.V. Urtsev, and A.A. Redikultsev: Phys. Metal Metallogr., 2020, vol. 120, pp. 1180–86. https://doi.org/10.1134/s0031918x1912010x.10.1134/s0031918x1912010x ↗
33. M. Mehdi, Y. He, E.J. Hilinski, L.A.I. Kestens, and A. Edrisy: Steel. Res. Int., 2019, vol. 90, p. 1800582. https://doi.org/10.1002/srin.201800582.10.1002/srin.201800582 ↗
34. J.L. Caron, S.S. Babu, and J.C. Lippold: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 4015–31. https://doi.org/10.1007/s11661-011-0801-1.10.1007/s11661-011-0801-1 ↗
35. A.H. Hunter, J.D. Farren, J.N. DuPont, and D.N. Seidman: Metall. Mater. Trans. A, 2012, vol. 44A, pp. 1741–59. https://doi.org/10.1007/s11661-012-1518-5.10.1007/s11661-012-1518-5 ↗
36. A. Zareidoost and M. Yousefpour: Mater. Lett., 2020, vol. 259, p. 126876. https://doi.org/10.1016/j.matlet.2019.126876.10.1016/j.matlet.2019.126876 ↗
37. C. Lan, Y. Wu, L. Guo, and F. Chen: Mater. Sci. Eng. A, 2017, vol. 690, pp. 170–76. https://doi.org/10.1016/j.msea.2017.02.045.10.1016/j.msea.2017.02.045 ↗