Thermo-Mechanically Assisted Grain Growth in Ti6Al4V Fabricated Using the Powder Bed Additive Manufacturing During High-Temperature Mechanical Testing
Source abstract
Abstract
High-temperature mechanical behaviors of metal alloys and the underlying microstructural variations responsible for such behaviors are important areas of interest for many industries particularly in their high-temperature applications. Transformation of grains which occur both during metal powder bed fusion additive manufacturing processes due to variation of thermal gradient and cooling rates, and afterward during different thermomechanical loads that parts experience in their specific applications, could also impact its mechanical properties both at room and high temperatures. This study focuses on in-depth analysis and understanding of how the grain structures of electron beam powder bed fusion (EB-PBF) Ti6Al4V alloy changes during high-temperature mechanical load, due to the interacting mechanisms. Mechanical testing is conducted for EB-PBF parts made at different build orientations up to 600 °C. Microstructural analysis using electron backscattered diffraction (EBSD) is conducted on samples before and after high-temperature mechanical testing to understand the interacting impact that temperature and mechanical load have on the activation of deformation mechanisms. EBSD analysis showed both grain size and grain orientation to be dependent on the build orientation. Mechanical testing at high temperature showed softening behavior especially from 400 °C to 600 °C temperature. Additionally, anisotropic behavior was observed which is associated with volume ratio of β phase as well as the anisotropic grain formation. Some grain coarsening was observed at higher test temperatures. Additional changes in misorientation angle and certain preferred grain orientation that varies with temperature signifies activation of geometric deformation mechanism.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. S. Liu and Y.C. Shin: Mater. Des., 2019, vol. 164, 107552.10.1016/j.matdes.2018.107552 ↗
2. J.C. Najmon, S. Raeisi, and A.. Tovar: Review of Additive Manufacturing Technologies and Applications in the Aerospace Industry, Elsevier, 2019.10.1016/B978-0-12-814062-8.00002-9 ↗
3. P. Nandwana and Y. Lee: Mater. Today Commun., 2020, vol. 24, 100962.10.1016/j.mtcomm.2020.100962 ↗
4. L. Ladani, J. Razmi, and S.F. Choudhury: J. Eng. Mater. Technol. Trans. ASME, 2014, vol. 136, pp. 1–7.10.1115/1.4027729 ↗
5. H.K. Rafi, N.V. Karthik, H. Gong, T.L. Starr, and B.E. Stucker: J. Mater. Eng. Perform., 2013, vol. 22, pp. 3872–83.10.1007/s11665-013-0658-0 ↗
6. X. Zhou, N. Dai, M. Chu, L. Wang, D. Li, L. Zhou, and X. Cheng: Int. J. Adv. Manuf. Technol., 2020, vol. 106, pp. 3–14.10.1007/s00170-019-04347-0 ↗
7. V. Chastand, P. Quaegebeur, W. Maia, and E. Charkaluk: Mater. Charact., 2018, vol. 143, pp. 76–81.10.1016/j.matchar.2018.03.028 ↗
8. X. Wang, L. Wang, L.S. Luo, X.D. Liu, Y.C. Tang, X.Z. Li, R.R. Chen, Y.Q. Su, J.J. Guo, and H.Z. Fu: J. Alloys Compd., 2017, vol. 728, pp. 709–18.10.1016/j.jallcom.2017.09.044 ↗
9. X. Tan, Y. Kok, Y.J. Tan, G. Vastola, Q.X. Pei, G. Zhang, Y.W. Zhang, S.B. Tor, K.F. Leong, and C.K. Chua: J. Alloys Compd., 2015, vol. 646, pp. 303–09.10.1016/j.jallcom.2015.05.178 ↗
10. L. Ladani: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2015, vol. 46, pp. 3835–41.10.1007/s11661-015-2965-6 ↗
11. B.E. Carroll, T.A. Palmer, and A.M. Beese: Acta Mater., 2015, vol. 87, pp. 309–20.10.1016/j.actamat.2014.12.054 ↗
12. X. Wang and K. Chou: J. Alloys Compd., 2018, vol. 748, pp. 236–44.10.1016/j.jallcom.2018.03.173 ↗
13. R. Ding, Z.X. Guo, and A. Wilson: Mater. Sci. Eng. A, 2002, vol. 327, pp. 233–45.10.1016/S0921-5093(01)01531-3 ↗
14. L. He, A. Dehghan-Manshadi, and R.J. Dippenaar: Mater. Sci. Eng. A, 2012, vol. 549, pp. 163–67.10.1016/j.msea.2012.04.025 ↗
15. Q. Bai, J. Lin, T.A. Dean, D.S. Balint, T. Gao, and Z. Zhang: Mater. Sci. Eng. A, 2013, vol. 559, pp. 352–58.10.1016/j.msea.2012.08.110 ↗
16. C.H. Park, J.H. Kim, Y.T. Hyun, J.T. Yeom, and N.S. Reddy: J. Alloys Compd., 2014, vol. 582, pp. 126–29.10.1016/j.jallcom.2013.08.041 ↗
17. P.M. Souza, P.D. Hodgson, B. Rolfe, R.P. Singh, and H. Beladi: J. Alloys Compd., 2019, vol. 793, pp. 467–79.10.1016/j.jallcom.2019.04.183 ↗
18. S. Zherebtsov, M. Murzinova, G. Salishchev, and S.L. Semiatin: Acta Mater., 2011, vol. 59, pp. 4138–50.10.1016/j.actamat.2011.03.037 ↗
19. B. Babu and L.E. Lindgren: Int. J. Plasticity, 2013, vol. 50, pp. 94–108.10.1016/j.ijplas.2013.04.003 ↗
20. L. Ladani and M. Sadeghilaridjani: Metals (Basel), 2021, vol. 11, p. 1391.10.3390/met11091391 ↗
21. L. Ladani: Additive Manufacturing of Metals, Materials, Processes, Tests and Standards, DEStech, Lancaster, 2020.
22. ASTM E8: Annual Book of ASTM Standards 4, 2010, pp. 1–27.
23. Arcam: GE Additive, 2019, p. 2.
24. M.J. Mian, J. Razmi, and L. Ladani: J. Manuf. Sci. Eng. Trans. ASME, 2021, vol. 143, pp. 1–2.10.1115/1.4049092 ↗
25. M.J. Mian, J. Razmi, and L. Ladani: Materialia, 2021, vol. 16, 101041.10.1016/j.mtla.2021.101041 ↗
26. M.J. Mian, J. Razmi, and L. Ladani: Metals (Basel), 2022, vol. 12, pp. 1–20.10.3390/met12010163 ↗
27. M. Shunmugavel, A. Polishetty, and G. Littlefair: Procedia Technol., 2015, vol. 20, pp. 231–36.10.1016/j.protcy.2015.07.037 ↗
28. S. Lampman: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 2018, vol. 2, ASM International, Materials Park, pp. 592–633.
29. GE: GE Additive, 2023, pp. 5–7.
30. J. Kim, K.H. Kim, and D. Kwon: Met. Mater. Int., 2016, vol. 22, pp. 209–15.10.1007/s12540-016-5619-3 ↗
31. J.H. Zhu, P.K. Liaw, J.M. Corum, and H.E. McCoy: Metall. Mater. Trans. A Phys., 1999, vol. 30, pp. 1569–78.10.1007/s11661-999-0094-9 ↗
32. W.S. Lee and C.F. Lin: Mater. Sci. Eng. A, 1998, vol. 241, pp. 48–59.10.1016/S0921-5093(97)00471-1 ↗
33. S.H. Wang, M.D. Wei, and L.W. Tsay: Mater. Lett., 2003, vol. 57, pp. 1815–23.10.1016/S0167-577X(02)01074-1 ↗
34. International Atomic and Energy Agency: Non-Destructive Testing: A Guidebook for Industrial Management and Quality Control Personnel, International Atomic and Energy Agency, Vienna, 1999.
35. B.B. Rath, B.K. Damkroger, M.A.. Imam and G.R. Edwards: High Temperature Ductility Loss in Titanium Alloys—A Review, Washington, DC (United States), 1994.10.2172/10124556 ↗
36. G.Z. Quan, G.C. Luo, J.T. Liang, D.S. Wu, A. Mao, and Q. Liu: Comput. Mater. Sci., 2015, vol. 97, pp. 136–47.10.1016/j.commatsci.2014.10.009 ↗
37. I. Weiss, F.H. Froes, D. Eylon, and G.E. Welsch: Metall. Trans. A, 1986, vol. 17A, pp. 1935–47.10.1007/BF02644991 ↗
38. N. Stefansson and S.L. Semiatin: Metall. Mater. Trans. A Phys. Metall. Trans. A, 2003, vol. 34A, pp. 691–98.10.1007/s11661-003-0103-3 ↗
39. T. Kurzynowski, M. Madeja, R. Dziedzic, and K. Kobiela: Scanning, 2019, vol. 2019, p. 12.10.1155/2019/2903920 ↗
40. I. Weiss and S.L. Semiatin: Mater. Sci. Eng. A, 1999, vol. 263, pp. 243–56.10.1016/S0921-5093(98)01155-1 ↗
41. A.A. Antonysamy, J. Meyer, and P.B. Prangnell: Mater. Charact., 2013, vol. 84, pp. 153–68.10.1016/j.matchar.2013.07.012 ↗
42. S.V.S. Narayana Murty, N. Nayan, P. Kumar, P. Ramesh Narayanan, S.C. Sharma, and K.M. George: Mater. Sci. Eng. A, 2014, vol. 589, pp. 174–81.10.1016/j.msea.2013.09.087 ↗
43. Y. Kim, Y.B. Song, S.H. Lee, and Y.S. Kwon: J. Alloys Compd., 2016, vol. 676, pp. 15–25.10.1016/j.jallcom.2016.03.146 ↗
44. J.J. Burke and V. Weiss: Advances in Deformation Processing, Plenum, New York, 1978.10.1007/978-1-4613-4024-9 ↗