Formation Mechanism of Three-Layer Solidified Structure in Commercial Purity Al During Solidification With a Forced Flow Field Induced by Pulsed Magnetic Field
Source abstract
Abstract
In the present study, the effect of pulsed magnetic field (PMF) on the solidification structure of commercial purity Al during unidirectional solidification was investigated through a series of experiments. The results show that columnar grains are formed without PMF, whereas a refined equiaxed grain layer with a smooth interface inside the large columnar dendrites is formed by controlling application of PMF. The nucleation sites can be ascribed to the direct heterogeneous nucleation in the bulk liquid and the detachment of grain nucleus from the mold wall. With increasing nucleation sites, the blockage of the columnar front and columnar-to-equiaxed transition occurs based on a threshold value of the volumetric fraction of equiaxed grains, which can be proven by the delay of equiaxed grain formation after switching on the PMF. After the magnetic field is switched off, the nucleation sites are full of liquid metal and settle down along the direction of gravity. At this time, the temperature gradient of the liquid is rebuilt, and finally a three-layer solidified structure is formed. The study is beneficial to deepen the understanding of solidification structure evolution of metals with a forced melt flow and temperature field.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. T. Manuwong, W. Zhang, P.L. Kazinczi, A.J. Bodey, C. Rau, and J. Mi: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2908–15.10.1007/s11661-015-2874-8 ↗
2. X. Xu, H. Ding, H. Huang, H. Liang, R. Chen, J. Guo, and H. Fu: J. Mater. Res. Technol., 2021, vol. 11, pp. 2221–34.10.1016/j.jmrt.2021.02.052 ↗
3. H.B. Dong and P.D. Lee: Acta Mater., 2005, vol. 53, pp. 659–68.10.1016/j.actamat.2004.10.019 ↗
4. X. Li, A. Gagnoud, Y. Fautrelle, Z. Ren, R. Moreau, Y. Zhang, and C. Esling: Acta Mater., 2012, vol. 60, pp. 3321–32.10.1016/j.actamat.2012.02.019 ↗
5. J.A. Spittle: Int. Mater. Rev., 2006, vol. 51, pp. 247–69.10.1179/174328006X102493 ↗
6. A. Badillo and C. Beckermann: Acta Mater., 2006, vol. 54, pp. 2015–26.10.1016/j.actamat.2005.12.025 ↗
7. M.A. Easton, M. Qian, A. Prasad, and D.H. StJohn: Curr. Opin. Solid State Mater. Sci., 2016, vol. 20, pp. 13–24.10.1016/j.cossms.2015.10.001 ↗
8. S. Eckert, P.A. Nikrityuk, B. Willers, D. Räbiger, N. Shevchenko, H. Neumann-Heyme, V. Travnikov, S. Odenbach, A. Voigt, and K. Eckert: Eur. Phys. J. Spec. Top., 2013, vol. 220, pp. 123–37.10.1140/epjst/e2013-01802-7 ↗
9. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, and R. Trivedi: Acta Mater., 2009, vol. 57, pp. 941–71.10.1016/j.actamat.2008.10.020 ↗
10. T. Campanella, C. Charbon, and M. Rappaz: Metall. Mater. Trans. A, 2004, vol. 35 A, pp. 3201–10.10.1007/s11661-004-0064-1 ↗
11. H.V. Atkinson: Prog. Mater. Sci., 2005, vol. 50, pp. 341–12.10.1016/j.pmatsci.2004.04.003 ↗
12. Z. Fan: Int. Mater. Rev., 2002, vol. 47, pp. 49–85.10.1179/095066001225001076 ↗
13. P.A. Nikrityuk, K. Eckert, and R. Grundmann: Int. J. Heat Mass Transf., 2006, vol. 49, pp. 1501–15.10.1016/j.ijheatmasstransfer.2005.08.035 ↗
14. P.A. Nikrityuk, K. Eckert, and S. Eckert: Int. J. Cast Met. Res., 2009, vol. 22, pp. 236–39.10.1179/136404609X367821 ↗
15. M. Medina, Y. Du Terrail, F. Durand, and Y. Fautrelle: Metall. Mater. Trans. B, 2004, vol. 35, pp. 743–54.10.1007/s11663-004-0014-8 ↗
16. M. Li, T. Tamura, and K. Miwa: Acta Mater., 2007, vol. 55, pp. 4635–43.10.1016/j.actamat.2007.04.035 ↗
17. B. WANG, Y. sheng YANG, X. ping MA, and W. hui TONG: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 283–88.10.1016/S1003-6326(09)60135-7 ↗
18. J.C. Jie, S.P. Yue, J. Liu, D.H. StJohn, Y.B. Zhang, E.Y. Guo, T.M. Wang, and T.J. Li: Acta Mater., 2021, vol. 208, 116747.10.1016/j.actamat.2021.116747 ↗
19. R. Moreau: Prog. Cryst. Growth Charact. Mater., 1999, vol. 38, pp. 161–94.10.1016/S0960-8974(99)00011-X ↗
20. P.A. Davidson: An Introduction to Magnetohydrodynamics, 1st ed. Cambridge University Press, New York, 2001, pp. 34–35.10.1017/CBO9780511626333 ↗
21. D. Räbiger, Y. Zhang, V. Galindo, S. Franke, B. Willers, and S. Eckert: Acta Mater., 2014, vol. 79, pp. 327–38.10.1016/j.actamat.2014.07.037 ↗
22. A.D. Brent, V.R. Voller, and K.J. Reid: Numer. Heat Transfer, Part A, 1988, vol. 13, pp. 297–318.
23. O. Ben-David, A. Levy, B. Mikhailovich, and A. Azulay: Int. J. Heat Mass Transf., 2013, vol. 67, pp. 260–71.10.1016/j.ijheatmasstransfer.2013.07.058 ↗
24. Q. Chen and H. Shen: Int. J. Heat Mass Transf., 2018, vol. 120, pp. 997–1008.10.1016/j.ijheatmasstransfer.2017.12.125 ↗
25. C. Gau and R. Viskanta: J. Heat Transf., 1986, vol. 108, pp. 174–81.10.1115/1.3246884 ↗
26. X. Liao, Q. Zhai, J. Luo, W. Chen, and Y. Gong: Acta Mater., 2007, vol. 55, pp. 3103–09.10.1016/j.actamat.2007.01.014 ↗
27. D. Liang, Z. Liang, Q. Zhai, G. Wang, and D.H. Stjohn: Mater. Lett., 2014, vol. 130, pp. 48–50.10.1016/j.matlet.2014.05.058 ↗
28. Y.L. Gao, Q.S. Li, Y.Y. Gong, and Q.J. Zhai: Mater. Lett., 2007, vol. 61, pp. 4011–14.10.1016/j.matlet.2007.01.007 ↗
29. B. Wang, Y.S. Yang, J. Zhou, and W. Tong: Mater. Sci. Technol., 2011, vol. 27, pp. 176–79.10.1179/174328409X428936 ↗
30. M. Kadkhodabeigi, J. Safarian, H. Tveit, M. Tangstad, and S.T. Johansen: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, pp. 2813–21.10.1016/S1003-6326(11)61537-9 ↗
31. C.E. Brennen: Fundamentals of multiphase flow, 1st ed. Cambridge University Press, New York, 2005, pp. 83–85.10.1017/CBO9780511807169 ↗
32. J.D. Hunt and K.A. Jackson: J. Appl. Phys., 1966, vol. 37, pp. 254–57.10.1063/1.1707821 ↗
33. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp. 75–83.10.1016/0025-5416(84)90201-5 ↗