Mechanism Controlling Elevated Temperature Deformation in Additively Manufactured Eutectic High-Entropy Alloy
Source abstract
Abstract
In the present study, high-temperature deformation behavior and creep response have been investigated for an additively manufactured eutectic high-entropy alloy (AM EHEA) with the composition AlCoCrFeNi2.1. The microstructure revealed L12 and bcc phases. High-temperature compression studies show that the yield strength tends to increase with the increase in temperature up to 400 °C and then starts declining till 800 °C. The yield strength was found to be almost similar at room temperature and 600 °C. To understand the anomaly in the temperature dependence of yield strength, first-principles density functional theory (DFT) calculations were performed using the diffuse multi-layer fault model (DMLF) to estimate the planar fault energies associated with the L12 crystal structure. It has been observed that the planar fault energy (PFE) associated with Antiphase boundary energy APB {001} was found to be the minimum among APB {111}, Superlattice intrinsic stacking fault SISF {111}, and Complex stacking fault CSF {111} thereby favoring the cross slip event of (frac{1}{2}langle 1overline{1 }0 angle ) from {111} to {001} leading to Kear-Wilsdorf (KW) lock. Yield strength anomaly can be attributed to the presence of L12-ordered intermetallic phase, where thermal activation of secondary slip systems plays a significant role during deformation. Further, a time-dependent deformation study at different constant loads was performed at an elevated temperature where the anomaly was observed. It was revealed that a sequential creep mechanism with dislocation climb-controlled creep is the dominant mechanism rather than diffusion creep.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. M.H. Tsai and J.W. Yeh: Mater. Res. Lett., 2014, vol. 2, pp. 107–23.10.1080/21663831.2014.912690 ↗
2. D.B. Miracle and O.N. Senkov: Acta Mater., 2017, vol. 122, pp. 448–511.10.1016/j.actamat.2016.08.081 ↗
3. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu: Prog. Mater. Sci., 2014, vol. 61, pp. 1–93.10.1016/j.pmatsci.2013.10.001 ↗
4. S. Guo, C. Ng, J. Lu, and C.T. Liu: J. Appl. Phys., 2011, vol. 109, p. 1035.
5. Y. Lu, Y. Dong, S. Guo, L. Jiang, H. Kang, T. Wang, B. Wen, Z. Wang, J. Jie, Z. Cao, H. Ruan, and T. Li: Sci. Rep., 2014, vol. 4, pp. 1–5.
6. T. Bhattacharjee, I.S. Wani, S. Sheikh, I.T. Clark, T. Okawa, S. Guo, P.P. Bhattacharjee, and N. Tsuji: Sci. Rep., 2018, vol. 8, pp. 1–8.
7. I.S. Wani, T. Bhattacharjee, S. Sheikh, Y.P. Lud, S. Chatterjee, P.P. Bhattacharjeea, S. Guo, and N. Tsujib: Mater. Res. Lett., 2016, vol. 4, pp. 174–79.10.1080/21663831.2016.1160451 ↗
8. I.S. Wani, T. Bhattacharjee, S. Sheikh, Y. Lu, S. Chatterjee, S. Guo, P.P. Bhattacharjee, and N. Tsuji: IOP Conf. Ser., 2017, vol. 194, pp. 3–8.10.1088/1757-899X/194/1/012018 ↗
9. S. Praveen and H.S. Kim: Adv. Eng. Mater., 2017, vol. 20, p. 1700645.10.1002/adem.201700645 ↗
10. B. Gorr, F. Müller, M. Azim, H.J. Christ, T. Müller, H. Chen, A. Kauffmann, and M. Heilmaier: Oxid. Met., 2017, vol. 88, pp. 339–49.10.1007/s11085-016-9696-y ↗
11. Y. Lu, Y. Dong, H. Jiang, Z. Wang, Z. Cao, S. Guo, T. Wang, T. Li, and P.K. Liaw: Scripta Mater., 2020, vol. 187, pp. 202–09.10.1016/j.scriptamat.2020.06.022 ↗
12. Y. Dong, Z. Yao, X. Huang, F. Du, C. Li, A. Chen, F. Wu, Y. Cheng, and Z. Zhang: J. Alloys Compd., 2020, vol. 823, 153886.10.1016/j.jallcom.2020.153886 ↗
13. R.J. Vikram, B.S. Murty, D. Fabijanic, and S. Suwas: J. Alloys Compd., 2020, vol. 827, 154034.10.1016/j.jallcom.2020.154034 ↗
14. L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, K.N. Amato, P.W. Shindo, F.R. Medina, and R.B. Wicker: J. Mater. Sci. Tech., 2012, vol. 28, pp. 1–4.10.1016/S1005-0302(12)60016-4 ↗
15. L.E. Murr, E. Martinez, K.N. Amato, S.M. Gaytan, J. Hernandez, D.A. Ramirez, P.W. Shindo, F. Medina, and R.B. Wicker: J. Mater. Res. Tech., 2012, vol. 1, pp. 42–54.10.1016/S2238-7854(12)70009-1 ↗
16. E. MacDonald and R. Wicker: Science, 2016, vol. 353, p. 6307.10.1126/science.aaf2093 ↗
17. B. Blakey-Milner, P. Gradl, G. Snedden, M. Brooks, J. Pitot, E. Lopez, M. Leary, F. Berto, and A. du Plessis: Mater. Des., 2021, vol. 209, 110008.10.1016/j.matdes.2021.110008 ↗
18. S.A.M. Tofail, E.P. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, and C. Charitidis: Mater. Today, 2018, vol. 21, pp. 22–37.10.1016/j.mattod.2017.07.001 ↗
19. J.P. Oliveira, T.G. Santos, and R.M. Miranda: Prog. Mater. Sci., 2020, vol. 107, 100590.10.1016/j.pmatsci.2019.100590 ↗
20. B. Lozanovski, D. Downing, R. Tino, A.D. Plessis, P. Tran, J. Jakeman, D. Shidid, C. Emmelmann, M. Qian, P. Choong, M. Brandt, and M. Leary: Addit. Manuf., 2020, vol. 36, 101593.
21. J.P. Oliveira, J. Shen, Z. Zeng, J.M. Park, Y.T. Choi, N. Schell, E. Maawad, N. Zhou, and H.S. Kim: Scripta Mater., 2022, vol. 206, 114219.10.1016/j.scriptamat.2021.114219 ↗
22. K.V. Vamsi and S. Karthikeyan: Scripta Mater., 2017, vol. 130, pp. 269–73.10.1016/j.scriptamat.2016.11.039 ↗
23. H.L. Wei, T. Mukherjee, W. Zhang, J.S. Zuback, G.L. Knapp, A. De, and T. DebRoy: Prog. Mater. Sci., 2021, vol. 116, 100703.10.1016/j.pmatsci.2020.100703 ↗
24. S. Paul, J. Liu, S.T. Strayer, Y. Zhao, S. Sridar, M.A. Klecka, W. Xiong, and A.C. To: Addit. Manuf., 2020, vol. 36, 101611.
25. K. V. Vamsi and S. Karthikeyan: Superalloys: 2012, pp. 521–30.10.1002/9781118516430.ch57 ↗
26. K. V. Vamsi: PhD Thesis, IISc. Bangalore, India, 2016
27. H. Kim: Scripta Mater., 2019, vol. 160, pp. 29–32.10.1016/j.scriptamat.2018.09.044 ↗
28. V. Vitek, D.P. Pope, and J.L. Bassani: Dislocations in Solids: Chapter 51 Anomalous yield behaviour of compounds with L12 structure, 10, 1996, pp. 135–8510.1016/S1572-4859(96)80006-4 ↗
29. A.H. Cottrell and B. Chalmers: Prog. Metal Phys., 1953, vol. 4, pp. 251–55.10.1016/0502-8205(53)90018-5 ↗
30. C. Lei, W. Weidong, C. Haitao, Z. Hongjian, and X. Ying: Chinese J. Aero., 2013, vol. 26, pp. 801–06.10.1016/j.cja.2013.04.002 ↗
31. J. Joseph, N. Stanford, P. Hodgson, and D.M. Fabijanic: Scripta Mater., 2017, vol. 129, pp. 30–34.10.1016/j.scriptamat.2016.10.023 ↗
32. P. Geng, W. Li, X. Zhang, Y. Deng, H. Kou, J. Ma, J. Shao, L. Chen, and X. Wu: J. Alloys Compd., 2017, vol. 706, pp. 340–43.10.1016/j.jallcom.2017.02.262 ↗
33. K.V. Vamsi and S. Karthikeyan: Acta Mater., 2018, vol. 145, pp. 532–42.10.1016/j.actamat.2017.10.029 ↗
34. K.V. Vamsi and T.M. Pollock: Scripta Mater., 2020, vol. 182, pp. 38–42.10.1016/j.scriptamat.2020.02.038 ↗
35. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131–39.10.1016/j.ultramic.2006.06.008 ↗
36. P. Pandey, S.K. Makineni, A. Samanta, A. Sharma, S.M. Das, B. Nithin, C. Srivastava, A.K. Singh, D. Raabe, B. Gault, and K. Chattopadhyay: Acta Mater., 2019, vol. 163, pp. 140–53.10.1016/j.actamat.2018.09.049 ↗
37. G. Kresse and J. Hafner: Phys. Rev. B, 1993, vol. 47, pp. 558–61.10.1103/PhysRevB.47.558 ↗
38. G. Kresse and J. Furthmüller: Comp. Mater. Sci., 1996, vol. 6, pp. 15–50.10.1016/0927-0256(96)00008-0 ↗
39. G. Kresse and J. Furthmüller: Phys. Rev. B, 1996, vol. 54, pp. 11169–86.10.1103/PhysRevB.54.11169 ↗
40. G. Kresse and J. Hafner: Phys. Rev. B, 1994, vol. 49, p. 14251.10.1103/PhysRevB.49.14251 ↗
41. MedeA version 2.6.6: Materials Design Inc, Angel Fire, NM, USA, 2009
42. M. Methfessel and A.T. Paxton: Phys. Rev. B, 1989, vol. 40, pp. 3616–21.10.1103/PhysRevB.40.3616 ↗
43. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865–68.10.1103/PhysRevLett.77.3865 ↗
44. A. Walle and G. Ceder: J. Phase Equil., 2002, vol. 23, pp. 348–59.10.1361/105497102770331596 ↗
45. A. van de Walle, P. Tiwary, M. de Jong, D.L. Olmsted, M. Asta, A. Dick, D. Shin, Y. Wang, L.-Q. Chen, and Z.-K. Liu: Calphad, 2013, vol. 42, pp. 13–18.10.1016/j.calphad.2013.06.006 ↗
46. Y.M. Wang-Koh: Mater. Sci. Tech., 2017, vol. 33, pp. 934–43.10.1080/02670836.2016.1215961 ↗
47. M. Yamashita and K. Kakehi: Scripta Mater., 2006, vol. 55, pp. 139–42.10.1016/j.scriptamat.2006.03.048 ↗
48. A. Suzuki and T.M. Pollock: Acta Mater., 2008, vol. 56, pp. 1288–97.10.1016/j.actamat.2007.11.014 ↗
49. W. Li, D. Xie, D. Li, Y. Zhang, Y. Gao, and P.K. Liaw: Prog. Mater. Sci., 2021, vol. 118, 100777.10.1016/j.pmatsci.2021.100777 ↗
50. M. Segersäll:, PhD Thesis, Linkoping Univ. Inst. Tech., Sweden, 2013
51. M. Khantha, J. Cserti, and V. Vitek: Scripta Metall. Mater., 1992, vol. 27, pp. 487–92.10.1016/0956-716X(92)90216-2 ↗
52. Y. Rao, T.M. Smith, M.J. Mills, and M. Ghazisaeidi: Acta Mater., 2018, vol. 148, pp. 173–84.10.1016/j.actamat.2018.01.055 ↗
53. J. Liu, C. Chen, Y. Xu, S. Wu, G. Wang, and H. Wang: Scripta Mater., 2017, vol. 137, pp. 9–12.10.1016/j.scriptamat.2017.05.001 ↗
54. K.M. Beyramali and Z.M. Asle: Scripta Mater., 2017, vol. 139, pp. 83–86.10.1016/j.scriptamat.2017.06.014 ↗
55. R.G. Davies and N.S. Stoloff: Trans. Metall. Soc. AIME, 1965, vol. 233, p. 714.
56. A. Kanjilal, V. Jangid, and P. Kumar: Mater. Sci. Eng. A, 2017, vol. 703, pp. 144–53.10.1016/j.msea.2017.07.061 ↗
57. B. Cantor: Prog. Mater. Sci., 2021, vol. 120, 100754.10.1016/j.pmatsci.2020.100754 ↗
58. A.H. Chokshi: Mater. Chem. Phys., 2018, vol. 210, pp. 152–61.10.1016/j.matchemphys.2017.07.079 ↗
59. Z. Wu, S. Sandlöbes, Y. Wang, J.S.K.L. Gibson, and S. Korte-Kerzel: Mater. Sci. Eng. A, 2018, vol. 724, pp. 80–94.10.1016/j.msea.2018.03.068 ↗
60. G.B. Viswanathan, P.M. Sarosi, M.F. Henry, D.D. Whitis, W.W. Milligan, and M.J. Mills: Acta Mater., 2005, vol. 53, pp. 3041–57.10.1016/j.actamat.2005.03.017 ↗