journal article·2022-09

Multi-dimensional Effect of Heat Treatment on Microstructure and Property of Ti6Al4V Alloy Fabricated by Selective Electron Beam Melting

Junyi Huang, Yang Yang, Xingru Wang, Xiaopeng Liang, Yanan Fu

Publisher page

Abstract

The as-built Ti6Al4V component was subjected to a heat treatment of solid solution at 1020 °C for 2 hours and followed by aging at 500 °C for 8 hours. The pores in different positions of Ti6Al4V components before and after heat treatment were analyzed by X-ray computed tomography (XRCT). The results show that the porosity in the center of the component decreased, while the porosity in the periphery increased, which eventually resulted in the overall porosity of the component decreasing from 0.232 to 0.147 pct after heat treatment. The changes of porosity in different positions are related to the differences in scanning strategy, cooling condition, and thermal stress. The optical microscope (OM) and X-ray diffraction (XRD) observations reveal that the columnar grains in as-built Ti6Al4V are transformed into equiaxed grains with an average grain size of 342.02 μm, the α phase thickness increases from 0.90 to 1.21 μm, and the content of β phase decreases from 12.3 to 5.5 pct after heat treatment. The density of the as-built component increases from 4.418 to 4.423 g cm−3 after heat treatment. The changes of micro-hardness in as-built and heat-treated samples are determined by specific microstructure and porosity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. S. Wen, J. Gan, F. Li, Y. Zhou, C. Yan, and Y. Shi: Materials, 2021, vol. 14, p. 4496.10.3390/ma14164496 ↗
2. P.K. Gokuldoss, S. Kolla, and J. Eckert: Materials, 2017, vol. 10, p. 672.10.3390/ma10060672 ↗
3. G.D. Guercio, M. Galati, A. Saboori, P. Fino, and L. Iuliano: Acta Metall. Sin. (Engl. Lett.), 2020, vol. 33, pp. 183–203.10.1007/s40195-020-00998-1 ↗
4. L. Zhang, Y. Liu, S. Li, and Y. Hao: Adv. Eng. Mater., 2018, vol. 20, p. 5.
5. S. Liu and Y.C. Shin: Mater. Des., 2019, vol. 164, p. 107552.10.1016/j.matdes.2018.107552 ↗
6. C.A. Biffi, J. Fiocchi, E. Ferrario, A. Fornaci, M. Riccio, M. Romeo, and A. Tuissi: Int. J. Adv. Manuf. Technol., 2020, vol. 107, pp. 4913–24.10.1007/s00170-020-05358-y ↗
7. Y. Zhai, H. Galarraga, and D.A. Lados: Eng. Failure Anal., 2016, vol. 69, pp. 3–14.10.1016/j.engfailanal.2016.05.036 ↗
8. B. Wysocki, P. Maj, R. Sitek, J. Buhagiar, K.J. Kurzydłowski, and W. Swieszkowski: Appl. Sci., 2017, vol. 7, p. 657.10.3390/app7070657 ↗
9. W. Ge, F. Lin, and C. Guo: Mater Manuf. Process., 2015, vol. 33(15), pp. 1708–13.10.1080/10426914.2015.1048463 ↗
10. X. Tan, Y. Kok, Y.J. Tan, G. Vastola, Q.X. Pei, G. Zhang, Y. Zhang, S.B. Tor, K.F. Leong, and C.K. Chua: J. Alloys Compd., 2015, vol. 646, pp. 303–09.10.1016/j.jallcom.2015.05.178 ↗
11. X. Tan, Y. Kok, Y.J. Tan, M. Descoins, D. Mangelinck, S.B. Tor, K.F. Leong, and C.K. Chua: Acta Mater., 2015, vol. 97, pp. 1–6.10.1016/j.actamat.2015.06.036 ↗
12. H. Galarraga, D.A. Lados, R.R. Dehoff, M.M. Kirka, and P. Nandwana: Addit. Manuf., 2016, vol. 10, pp. 47–57.
13. A. Gupta, C.J. Bennett, and W. Sun: Eng. Failure Anal., 2021, vol. 120, p. 105115.10.1016/j.engfailanal.2020.105115 ↗
14. M. Seifi, A. Salem, D. Satko, J. Shaffer, and J.J. Lewandowski: Int. J. Fatigue, 2016, vol. 94, pp. 263–87.10.1016/j.ijfatigue.2016.06.001 ↗
15. B. Romali, K.S. Abdul, and X. Zhang: Addit. Manuf., 2018, vol. 23, pp. 433–42.
16. B. Romali, X. Zhang, A.K. Syed, M. Awd, J. Ding, F. Walther, and S. Williams: Int. J. Fatigue, 2019, vol. 122, pp. 208–17.10.1016/j.ijfatigue.2019.01.017 ↗
17. T.R. Smith, J.D. Sugar, J.M. Schoenung, and C.S. Marchi: Mater. Sci. Eng. A, 2019, vol. 765, p. 138268.10.1016/j.msea.2019.138268 ↗
18. J. Ran, F. Jiang, X. Sun, Z. Chen, C. Tian, and H. Zhao: Crystals, 2020, vol. 10, p. 972.10.3390/cryst10110972 ↗
19. S.A. Khairallah, A.T. Anderson, A. Rubenchik, and W.E. King: Acta Mater., 2016, vol. 108, pp. 36–45.10.1016/j.actamat.2016.02.014 ↗
20. R. Cunningham, A. Nicolas, J. Madsen, E. Fodrand, E. Anagnostouc, M.D. Sangidb, and A.D. Rolletta: Mater. Res. Lett., 2017, vol. 5(7), pp. 516–25.10.1080/21663831.2017.1340911 ↗
21. A.D. Plessis and E. Macdonald: Addit. Manuf., 2020, vol. 34, p. 101191.
22. D.M. Bond and M.A. Zikry: Addit. Manuf., 2020, vol. 32, p. 101059.
23. Ó. Teixeira, F.J.G. Silva, L.P. Ferreira, and E. Atzeni: METALS, 2020, vol. 10(8), pp. 1–24.10.3390/met10081006 ↗
24. R. Cunningham, S.P. Narra, T. Ozturk, J. Beuth, and A.D. Rollett: JOM, 2016, vol. 68, pp. 765–71.10.1007/s11837-015-1802-0 ↗
25. Y.Q. Ren, P.C. King, Y.S. Yangb, T.Q. Xiaoa, C. Chub, S. Guliziab, and A.B. Murphy: Mater. Charact., 2017, vol. 132, pp. 69–75.10.1016/j.matchar.2017.08.006 ↗
26. A.M. Khorasani, I. Gibson, A.H. Ghasemi, and A. Ghaderi: Virtual. Phys. Proroty., 2019, vol. 14(4), pp. 349–59.10.1080/17452759.2019.1614198 ↗
27. X. Shui, K. Yamanaka, M. Mori, Y. Nagatad, K. Kuritad, and A. Chiba: Mater. Sci. Eng. A, 2017, vol. 680, pp. 239–48.10.1016/j.msea.2016.10.059 ↗
28. S.T. Williams, P.J. Withers, I. Todd, and P.B. Prangnell: Scr. Mater., 2016, vol. 122, pp. 72–76.10.1016/j.scriptamat.2016.05.002 ↗
29. A.K. Syed, M. Awd, F. Walther, and X. Zhang: Mater. Sci. Technol., 2019, vol. 35, pp. 653–60.10.1080/02670836.2019.1580434 ↗
30. N. Hrabe and T. Quinn: Mater. Sci. Eng. A, 2013, vol. 573, pp. 264–70.10.1016/j.msea.2013.02.064 ↗
31. N. Hrabe and T. Quinn: Mater. Sci. Eng. A, 2013, vol. 573, pp. 271–77.10.1016/j.msea.2013.02.065 ↗
32. T. Pasang, B. Tavlovich, O. Yannay, B. Jackson, M. Fry, Y. Tao, C. Turangi, J. Wang, C. Jiang, Y. Sato, M. Tsukamoto, and W.Z. Misiolek: Materials, 2021, vol. 14, p. 3603.10.3390/ma14133603 ↗
33. H. Gong, V.K. Nadimpalli, K. Rafi, T. Starr, and B. Stucker: Technologies, 2019, vol. 7, p. 44.10.3390/technologies7020044 ↗
34. A.D. Plessis, I. Yadroitsava, and I. Yadroitsev: Mater. Des., 2019, vol. 187, p. 108385.10.1016/j.matdes.2019.108385 ↗
35. S. Yang, Y. Yang, Z. Yang, C. Lu, and W. Liu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1771–80.10.1007/s11661-020-05641-3 ↗
36. H. Toda, E. Maire, S. Yamauchi, H. Tsuruta, T. Hiramatsu, and M. Kobayashi: Acta Mater., 2011, vol. 59, pp. 1995–2008.10.1016/j.actamat.2010.11.065 ↗
37. J.A. Slotwinski, E.J. Garboczi, and K.M. Hebenstreit: J. Res. Natl. Inst. Stand. Technol., 2014, vol. 119, pp. 494–528.10.6028/jres.119.019 ↗
38. A.B. Spierings, M. Schneider, and R. Eggenberger: Rapid. Prototyping. J., 2011, vol. 17, pp. 380–86.10.1108/13552541111156504 ↗
39. M. Rashid, R.L. Narayan, D.L. Zhang, and W.Z. Han: J. Mater. Eng. Perform., 2022, vol. 31, pp. 542–51.10.1007/s11665-021-06197-y ↗
40. F. Michaela, V. Dalibor, D. Karel, D. Matej, and C.F. Lin: Materials, 2018, vol. 11, p. 537.10.3390/ma11040537 ↗
41. P. Nandwana, Y. Lee, C. Ranger, A.D. Rollett, R.R. Dehoff, and S.S. Babu: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 3429–39.10.1007/s11661-019-05247-4 ↗
42. S. Raghavan, M.L.S. Nai, P. Wang, W.J. Sin, T. Li, and J. Wei: Rapid Prototyping J., 2018, vol. 24, pp. 774–83.10.1108/RPJ-05-2016-0070 ↗
43. X. Liu, Z. Shun, B. Li, and H. Guo: Xi You Jin Shu Cai Liao Yu Gong Cheng, 2018, vol. 47, pp. 3045–51.
44. D. Masaylo, S. Igoshin, A. Popovich, and V. Popovich: Mater. Today Proc., 2020, vol. 30, pp. 665–71.10.1016/j.matpr.2020.01.519 ↗
45. S.T. Williams, H. Zhao, F. Léonard, F. Derguti, I. Todd, and P.B. Prangnell: Mater. Charact., 2015, vol. 102, pp. 47–61.10.1016/j.matchar.2015.02.008 ↗
46. X. Zhao, S. Dadbakhsh, and A. Rashid: J Manuf. Process., 2021, vol. 62, pp. 418–29.10.1016/j.jmapro.2020.12.007 ↗
47. L. Xie, H. Guo, Y. Song, L. Hua, L. Wang, and L. Zhang: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 457–61.10.1007/s11661-020-06098-0 ↗
48. L. Li: J. Mater. Sci., 2006, vol. 41, pp. 7886–893.10.1007/s10853-006-0948-0 ↗
49. Z. Snow, A.R. Nassar, and E.W. Reutzel: Addit. Manuf., 2020, vol. 36, p. 101457.
50. V. Popov, A.K. Demyanetz, A. Garkun, G. Muller, E. Strokin, and H. Rosenson: Procedia Manuf., 2018, vol. 21, pp. 125–32.10.1016/j.promfg.2018.02.102 ↗