Microstructure and Tribological Performances of Laser Cladded Ni–Mo–Cr3C2 Coatings Under Grease-Lubrication Condition
Source abstract
Abstract
Ni–Mo–Cr3C2 system coatings with the different Cr3C2 mass fractions were prepared on GCr15 bearing steel by laser cladding (LC). The microstructure and phases of obtained coatings were analyzed using an ultra-depth of field microscope (UDFM) and X-ray diffractometer (XRD), respectively. The friction-wear performance of Ni–Mo–Cr3C2 coatings under the grease-lubrication condition was investigated using a ball-disc-wear test, and the wear mechanism was also discussed. The results show that the Ni–Mo–Cr3C2 coatings have a strong dendritic structure, in which the Cr3C2 with the spherical shape is distributed on the coatings. The hardness of Ni–Mo–5Cr3C2, –15Cr3C2 and –25Cr3C2 coatings is 990 ± 29, 1018 ± 33, and 1316 ± 27 HV0.5, respectively, higher than 540 ± 30 HV0.5 of substrate. The average coefficients of friction (COFs) of Ni–Mo–5Cr3C2, –15Cr3C2 and –25Cr3C2 coatings are 0.12 ± 0.07, 0.11 ± 0.05, and 0.10 ± 0.04, respectively, and the corresponding wear rates are 71.9 ± 3.3, 40.1 ± 2.4, and 19.9 ± 2.7 μm3 s−1 N−1, respectively, which decrease with the increase of Cr3C2 mass fraction. The reinforcing phase of Cr3C2 exhibits the excellent performance of friction reduction, which also further improves the wear resistance. Moreover, the grease storage in the pores plays the role of friction reduction, in which the lubrication effect of round-edged pores is better than that of sharp-edged pores.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Y.Z. Li, S.F. Liu, T. Xue, Y.K. Wei, X. Yang, and Y. Wang: Mater. Lett., 2021, vol. 305, 130726. https://doi.org/10.1016/j.matlet.2021.130726.10.1016/j.matlet.2021.130726 ↗
2. Y.G. Liu, M.Q. Li, and J. Luo: Mater. Sci. Eng. A, 2013, vol. 574, pp. 1–8. https://doi.org/10.1016/j.msea.2013.03.011.10.1016/j.msea.2013.03.011 ↗
3. M.E. Laithy, L. Wang, T.J. Harvey, B. Vierneusel, M. Correns, and T. Blass: Mater. Sci. Eng. A, 2020, vol. 772, 138737. https://doi.org/10.1016/j.triboint.2019.105849.10.1016/j.triboint.2019.105849 ↗
4. M. Cerrada, R.V. Sánchez, C. Li, F. Pacheco, D. Cabrera, J.V.D. Oliveirae, and R.E. Vásquez: Mech. Syst. Signal. Process., 2018, vol. 99, pp. 169–96. https://doi.org/10.1016/j.ymssp.2017.06.012.10.1016/j.ymssp.2017.06.012 ↗
5. W.C. Kong, Z. Yu, and J. Hu: Corros. Sci., 2022, vol. 204, p. 110375. https://doi.org/10.1016/j.corsci.2022.110375.10.1016/j.corsci.2022.110375 ↗
6. J.S. Liu and Y. Shi: Surf. Coat. Technol., 2021, vol. 412, 127044. https://doi.org/10.1016/j.surfcoat.2021.127044.10.1016/j.surfcoat.2021.127044 ↗
7. L.D. Zhu, P.S. Xue, Q. Lan, G.R. Meng, Y. Ren, Z.C. Yang, P.H. Xua, and Z. Liu: Opt. Laser Technol., 2021, vol. 138, 106915. https://doi.org/10.1016/j.optlastec.2021.106915.10.1016/j.optlastec.2021.106915 ↗
8. J.D. Majumdar, R. Galun, B.L. Mordike, and I. Manna: Mater. Sci. Eng. A, 2003, vol. 361, pp. 119–29. https://doi.org/10.1016/S0921-5093(03)00519-7.10.1016/S0921-5093(03)00519-7 ↗
9. Y.K. Xu, S. Ma, M.Y. Fan, Y.N. Chen, X.D. Song, and J.M. Hao: Surf. Coat. Technol., 2019, vol. 363, pp. 51–60. https://doi.org/10.1016/j.surfcoat.2019.02.016.10.1016/j.surfcoat.2019.02.016 ↗
10. J.H. Liu, Z.L. Pei, W.B. Shi, Y.D. Liu, J. Gong, and C. Sun: Surf. Coat. Technol., 2020, vol. 385, 125451. https://doi.org/10.1016/j.surfcoat.2020.125451.10.1016/j.surfcoat.2020.125451 ↗
11. J. Pirso, M. Viljus, and S. Letunovits: Tribol. Int., 2004, vol. 37, pp. 817–24. https://doi.org/10.1016/j.triboint.2004.04.009.10.1016/j.triboint.2004.04.009 ↗
12. Y.L. Gui, C.Y. Song, L. Yang, and X.L. Qin: J. Alloys Compd., 2013, vol. 509, pp. 4987–991. https://doi.org/10.1016/j.jallcom.2011.01.179.10.1016/j.jallcom.2011.01.179 ↗
13. X.J. Ran, J.T. Shang, L.M. Wang, and X.Y. Zhang: Procedia Manuf., 2020, vol. 43, pp. 487–94. https://doi.org/10.1016/j.promfg.2020.02.184.10.1016/j.promfg.2020.02.184 ↗
14. J.L. Zhou and D.J. Kong: Surf. Coat. Technol., 2020, vol. 383, 125229. https://doi.org/10.1016/j.surfcoat.2019.125229.10.1016/j.surfcoat.2019.125229 ↗
15. J.L. Zhou and D.J. Kong: J. Alloys Compd., 2019, vol. 795, pp. 416–25. https://doi.org/10.1016/j.jallcom.2019.05.012.10.1016/j.jallcom.2019.05.012 ↗
16. T.S. Liang, L. Wang, Y. Liu, and X. Song: Mater. Sci. Eng. A, 2020, vol. 787, 139453. https://doi.org/10.1016/j.msea.2020.139453.10.1016/j.msea.2020.139453 ↗
17. Y.D. Jiao, Z.Y. Huang, W.Q. Hu, X. Li, Q. Yu, Y.B. Wang, Y. Zhou, and D. Dastan: Mater. Sci. Eng. A, 2021, vol. 820, 141524. https://doi.org/10.1016/j.msea.2021.141524.10.1016/j.msea.2021.141524 ↗
18. L. Ceschini, G. Palombarini, G. Sambogna, D. Firrao, G. Scavino, and G. Ubertalli: Tribol. Int, 2006, vol. 39, pp. 748–55. https://doi.org/10.1016/j.triboint.2005.07.003.10.1016/j.triboint.2005.07.003 ↗
19. D.G. Bhosale, W.S. Rathod, and S.W. Rukhande: Mater. Today Proceed., 2021, vol. 41, pp. 780–85. https://doi.org/10.1016/j.matpr.2020.08.466.10.1016/j.matpr.2020.08.466 ↗
20. G. Cui, B. Han, J.B. Zhao, and M.Y. Li: Tribol. Int., 2019, vol. 134, pp. 36–49. https://doi.org/10.1016/j.triboint.2019.01.019.10.1016/j.triboint.2019.01.019 ↗
21. V. Dolique, A.L. Thomann, P. Brault, Y. Tessier, and P. Gillon: Surf. Coat. Technol., 2010, vol. 204, pp. 1989–992. https://doi.org/10.1016/j.surfcoat.2009.12.006.10.1016/j.surfcoat.2009.12.006 ↗
22. Y. Fu, C. Huang, C.W. Du, J. Li, C.D. Dai, H. Luo, Z.Y. Liu, and X.G. Li: Corros. Sci, 2021, vol. 191, 109727. https://doi.org/10.1016/j.corsci.2021.109727.10.1016/j.corsci.2021.109727 ↗
23. Z. Gu, W.S. Peng, W.M. Guo, Y. Zhang, J. Hou, Q.Y. He, K.X. Zhao, and S.Q. Xi: Surf. Coat. Technol., 2021, vol. 408, 126793. https://doi.org/10.1016/j.surfcoat.2020.126793.10.1016/j.surfcoat.2020.126793 ↗
24. T. Min, Y. Gao, Y. Li, Y. Ying, R. Li, and X. Xie: Rare Met. Mater. Eng., 2012, vol. 41, pp. 271–75. https://doi.org/10.3969/j.issn.1002-185X.2012.02.018.10.3969/j.issn.1002-185X.2012.02.018 ↗
25. L. Yate, L. Martínez-de-Olcoz, V.I. Ivashchenko, A.V. Pshyk, E. Coy, J. Esteve, and A. Lousa: J. Alloys Compd., 2020, vol. 848, p. 156373. https://doi.org/10.1016/j.jallcom.2020.156373.10.1016/j.jallcom.2020.156373 ↗
26. K.X. Gu, M.J. Pang, and Y.Z. Zhan: J. Phys. Chem. Solids, 2018, vol. 118, pp. 68–72. https://doi.org/10.1016/j.jpcs.2018.02.044.10.1016/j.jpcs.2018.02.044 ↗
27. W.C. Kong, K.M. Li, and J. Hu: Opt. Laser Technol., 2022, vol. 142, 107214. https://doi.org/10.1016/j.optlastec.2021.107214.10.1016/j.optlastec.2021.107214 ↗
28. B.X. Song, T.B. Yu, X.Y. Jiang, W.C. Xi, and X.L. Lin: Int. J. Therm. Sci., 2021, vol. 159, p. 106579. https://doi.org/10.1016/j.ijthermalsci.2020.106579.10.1016/j.ijthermalsci.2020.106579 ↗
29. R. Awasthi, P.K. Limaye, S. Kumar, R.P. Kushwaha, C.S. Viswanadham, D. Srivastava, N.L. Soni, R.J. Patel, and G.K. Dey: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1237–252. https://doi.org/10.1016/j.ijthermalsci.2020.106579.10.1016/j.ijthermalsci.2020.106579 ↗
30. M. Fathi, M.S. Safavi, S. Mirzazadeh, A. Ansariyan, and I. Ahadzadeh: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 897–908. https://doi.org/10.1007/s11661-019-05559-5.10.1007/s11661-019-05559-5 ↗
31. X.R. Yang, J.H. Jia, W. Chen, G. Yang, H. Xin, N.R. He, and S.Q. Ma: Ceram. Int., 2022, vol. 48, pp. 15144–5151. https://doi.org/10.1016/j.ceramint.2022.02.044.10.1016/j.ceramint.2022.02.044 ↗
32. J.H. He and E.J. Lavernia: Mater. Sci. Eng. A, 2001, vol. 301, pp. 69–79. https://doi.org/10.1016/S0921-5093(00)01383-6.10.1016/S0921-5093(00)01383-6 ↗
33. Y. Ishikawa, S. Kuroda, J. Kawakita, Y. Sakamoto, and M. Takaya: Surf. Coat. Technol., 2007, vol. 201, pp. 4718–727. https://doi.org/10.1016/j.surfcoat.2006.10.007.10.1016/j.surfcoat.2006.10.007 ↗
34. W.C. Kong, K.M. Li, and J. Hu: J. Wuhan Univ. Technol. Mater. Sci. Ed., 2022, vol. 37, pp. 76–84. https://doi.org/10.1007/s11595-022-2501-7.10.1007/s11595-022-2501-7 ↗
35. J.L. Zhou and D.J. Kong: Mater. Res. Express, 2019, vol. 6, 035203. https://doi.org/10.1088/2053-1591/aaf48b.10.1088/2053-1591/aaf48b ↗
36. V.N.V. Munagala, S. Bessette, R. Gauvin, and R.R. Chromik: Wear, 2020, vol. 450–451, 203269. https://doi.org/10.1016/j.wear.2020.203268.10.1016/j.wear.2020.203268 ↗
37. B. Vierneusel, L. Benker, S. Tremmel, M. Göken, and B. Merle: Thin Solid Films, 2017, vol. 638, pp. 159–66. https://doi.org/10.1016/j.tsf.2017.06.016.10.1016/j.tsf.2017.06.016 ↗
38. Y. Wang, K.Y. Li, F. Scenini, J. Jiao, S.J. Qu, Q. Luo, and J. Shen: Surf. Coat. Technol., 2016, vol. 302, pp. 27–38. https://doi.org/10.1016/j.surfcoat.2016.05.034.10.1016/j.surfcoat.2016.05.034 ↗
39. H. Liu and D.S. Qian: Trans. Nonferrous Metals Soc. China, 2018, vol. 28, pp. 2499–510. https://doi.org/10.1016/S1003-6326(18)64896-4.10.1016/S1003-6326(18)64896-4 ↗
40. R.A. Al-Samarai, A.K.R. Haftirman, and Y. Al-Douri: J. King Saud Univ. Eng. Sci., 2021. https://doi.org/10.1016/j.jksues.2021.08.009.10.1016/j.jksues.2021.08.009 ↗
41. C. Zhang, B. Huang, J.Y. Xu, W.J. Cao, G.D. Sun, J.K. Xiao, and S. Yin: Ceram. Int., 2020, vol. 46, pp. 15066–5075. https://doi.org/10.1016/j.ceramint.2020.03.041.10.1016/j.ceramint.2020.03.041 ↗
42. C.A. León-Patiño, M. Braulio-Sánchez, E.A. Aguilar-Reyes, E. Bedolla-Becerril, and A. Bedolla-Jacuinde: Wear, 2019, vol. 426–427, pp. 989–95. https://doi.org/10.1016/j.wear.2019.01.074.10.1016/j.wear.2019.01.074 ↗
43. Z.Y. Zhao, P.F. Hui, T. Wang, Y.H. Xu, L.S. Zhong, M.X. Zhao, D.X. Yang, and R. Wei: Appl. Surf. Sci., 2018, vol. 462, pp. 48–54. https://doi.org/10.1016/j.apsusc.2018.08.083.10.1016/j.apsusc.2018.08.083 ↗
44. Y.H. Zhou, Z.H. Zhang, Y.P. Wang, G. Liu, S.Y. Zhou, Y.L. Li, J. Shen, and M. Yan: Additive Manuf., 2019, vol. 25, pp. 204–17. https://doi.org/10.1016/j.addma.2018.10.046.10.1016/j.addma.2018.10.046 ↗