Investigation of Laser Surface Remelting Supported by Acoustic Emission Analysis and Machine Learning
Source abstract
Abstract
In the present work, laser surface remelting (LSR) was carried out on C45 carbon steel using an Nd:YAG pulse laser. The effect of process parameters, such as different laser pulse durations and the absence or presence of a graphite absorber, on the microstructure, remelting depth, and microhardness was examined. In most cases, the graphite coating enhanced the laser energy absorption into the surface, resulting in greater depths of the remelted zone (RZ). RZ depth increased ranging from 8 to 350 pct, depending on the laser pulse duration. An increase in the surface microhardness by a factor of 2.6 was achieved in comparison with the substrate material microhardness, namely 559 HV 0.05 versus 211 HV 0.05. Concurrently, the LSR treatment parameters were also investigated using the in process generated acoustic emission (AE) signals. AE characteristics, such as AE peak amplitude, signal duration, count, and energy, were evaluated. A correlation of the AE characteristics was established for the various LSR treatment parameters. The LSR treatment classification results confirm the feasibility of using AE in combination with machine learning (ML) for monitoring LSR and the resulting surface properties of the hardened material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. E. Anusha, A. Kumar, and S.M. Shariff: Opt. Laser Technol., 2020, vol. 125, p. 106061.10.1016/j.optlastec.2020.106061 ↗
2. M. Bojinović, N. Mole, and B. Štok: Surf. Coat. Technol., 2015, vol. 273, pp. 60–76.10.1016/j.surfcoat.2015.01.075 ↗
3. P.D. Babu and K.R. Balasubramanian: Int. J. Surf. Sci. Eng., 2011, vol. 5, pp. 131–51.10.1504/IJSURFSE.2011.041398 ↗
4. N. Maharjan, W. Zhou, Y. Zhou, Y. Guan, and N. Wu: Surf. Coat. Technol., 2019, vol. 366, pp. 311–20.10.1016/j.surfcoat.2019.03.036 ↗
5. J. Bouquet, D.V. Camp, H. Vanhove, S. Clijsters, M. Amirahmad, and B. Lauwers: Phys. Procedia., 2014, vol. 56, pp. 1083–93.10.1016/j.phpro.2014.08.021 ↗
6. K.M.B. Karthikeyan, T. Balasubramanian, V. Thillaivanan, and G.V. Jangetti: Mater. Today: Proc., 2020, vol. 22, pp. 3048–55.
7. M. Hua, T.M. Shao, and H.Y. Tam: J. Mater. Process. Technol., 2009, vol. 209, pp. 4689–97.10.1016/j.jmatprotec.2008.10.058 ↗
8. J. Grum and T. Kek: Thin Solid Films., 2004, vol. 453–454, pp. 94–9.10.1016/j.tsf.2003.11.177 ↗
9. A.I. Katsamas and G.N. Haidemenopoulos: Surf. Coat. Technol., 1999, vol. 115, pp. 249–55.10.1016/S0257-8972(99)00246-7 ↗
10. A. Bendoumi, N. Makuch, R. Chegroune, M. Kulka, M. Keddam, P. Dziarski, and D. Przestacki: Surf. Coat. Technol., 2020, vol. 387, p. 125541.10.1016/j.surfcoat.2020.125541 ↗
11. C. Qiu, Z. Wang, A.S. Aladawi, M. Al-Kindi, I. Al-Hatmi, H. Chen, and L. Chen: Metall. Mater. Trans. A., 2019, vol. 50, pp. 4423–34.10.1007/s11661-019-05348-0 ↗
12. C. Wang and A. Mandelis: NDT E Int., 2007, vol. 40, pp. 158–67.10.1016/j.ndteint.2006.09.005 ↗
13. R. Velazquez-Hernandez, A. Melnikov, A. Mandelis, K. Sivagurunathan, M.E. Rodriguez-Garcia, and J. Garcia: NDT E Int., 2012, vol. 45, pp. 16–21.10.1016/j.ndteint.2011.08.006 ↗
14. D. Schneider, R. Hofmann, T. Schwarz, T. Grosser, and E. Hensel: Surf. Coat. Technol., 2012, vol. 206, pp. 2079–88.10.1016/j.surfcoat.2011.09.017 ↗
15. T. Kek and J. Grum: Insight., 2009, vol. 51, pp. 124–8.10.1784/insi.2009.51.3.124 ↗
16. Y. Luo, L. Zhu, J. Han, X. Xie, R. Wan, and Y. Zhu: Mech. Syst. Signal Process., 2019, vol. 124, pp. 715–23.10.1016/j.ymssp.2019.01.045 ↗
17. S. Shevchik, T. Le-Quang, B. Meylan, and K. Wasmer: General assembly of the European Working Group on Acoustic Emission (EWGAE), organiser. In: 33rd European Conference on Acoustic Emission Testing, Senlis, (2018).
18. S. Shevchik, T. Le-Quang, B. Meylan, F.V. Farahani, M.P. Olbinado, A. Rack, G. Masinelli, C. Leinenbach, and K. Wasmer: Sci. Rep., 2020, vol. 33, p. 89.
19. F. Honarvar and M. Zeighami: 17th World Conference on Nondestructive Testing, Shanghai 2008.
20. H. Mao, Q. Li, H. Mao, Z. Huang, W. Tang, H. Huang, X. Yi, G. Qing, and X. Li: NDT E Int., 2020, vol. 112, p. 10244.10.1016/j.ndteint.2020.102244 ↗
21. T. Purtonen, A. Kalliosaari, and A. Salminen: Phys. Procedia., 2014, vol. 56, pp. 218–31.10.1016/j.phpro.2014.08.038 ↗
22. R.J. Smith, M. Hirsch, R. Patel, W. Li, A.T. Clare, and S.D. Sharples: J. Mate. Process. Technol., 2016, vol. 236, pp. 93–102.10.1016/j.jmatprotec.2016.05.005 ↗
23. N. Eschner, L. Weiser, B. Häfner, and G. Lanza: The Minerals, Metals & Materials Society (TMS), organiser. In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium; Austin pp. 2097–117 (2018).
24. L. Li: Appl. Surf. Sci., 2002, vol. 186, pp. 604–10.10.1016/S0169-4332(01)00695-X ↗
25. J. Wu, J. Zhao, H. Qiao, X. Liu, Y. Zhang, and T. Hu: Opto-Electron. Adv., 2018, vol. 1, p. 1180016.10.29026/oea.2018.180016 ↗
26. M. Zuric, O. Nottrodt, and P. Abels: J. Laser Micro Nanoeng., 2019, vol. 14, pp. 245–54.
27. Q.Y. Lu and C.H. Wong: Virtual Phys. Prototyp., 2017, vol. 13, pp. 39–48.10.1080/17452759.2017.1351201 ↗
28. S.A. Shevchik, C. Kenel, C. Leinenbach, and K. Wasmer: Addit. Manuf., 2018, vol. 21, pp. 598–604.
29. E. Kennedy, G. Byrne, and D.N. Collins: J. Mater. Process. Technol., 2004, vol. 155–156, pp. 1855–60.10.1016/j.jmatprotec.2004.04.276 ↗
30. P.L. Zhang, H. Yan, P.Q. Xu, Z.S. Yu, C.G. Li, and Q.H. Lu: Lasers Eng., 2014, vol. 28, pp. 135–49.
31. G. Muthukumaran and P.D. Babu: J. Braz. Soc. Mech. Sci. Eng., 2021, vol. 43, p. 103.10.1007/s40430-021-02854-4 ↗
32. S.F. Gnyusov, I.A. Isakin, S.Y.U. Tarasov, and S.E. Bukhanchenko: Metall Mater. Trans. A., 2019, vol. 50, pp. 4307–18.10.1007/s11661-019-05319-5 ↗
33. N. Maharjan, W. Zhou, and N. Wu: Surf. Coat. Technol., 2020, vol. 385, p. 125399.10.1016/j.surfcoat.2020.125399 ↗