journal article·2022-03

Amorphous Intergranular Film Effect on the Texture and Structural Evolution During Cold-Rolling of Nanocrystalline Ni–Zr Alloys

K. Vijay Reddy, Timothy J. Rupert, Snehanshu Pal

Publisher page

Abstract

Abstract The presence of amorphous intergranular films (AIFs) in nanocrystalline (NC) metals improves the mechanical properties and thermal stability. However, their influence on the overall deformation behavior of bulk nanostructured materials during the fabrication process is still unexplored. Here, we investigate the texture and defect evolution along with the stress distribution in NC Ni specimens with ordered grain boundaries (GBs), 50 pct AIFs, and 100 pct AIFs during the cold-rolling process. Results from the orientation analysis and texture plots reveal that samples with only traditional ordered GBs show stress-induced grain growth, whereas the presence of AIFs reduces extensive grain rotations and boundary movements. Findings from the atomic stress analysis also indicate tensile residual stress in specimen with amorphous films due to the anisotropic grain elongation without significant grain growth. Further, amorphous films also aid in confinement of dislocations near the surface of the specimens and annihilation of defects in the center grains, thus generating a harder surface and a softer core. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. M.A. Meyers, A. Mishra, and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
2. M. Dao, L. Lu, R.J. Asaro, J.T.M. De Hosson, and E. Ma: Acta Mater., 2007, vol. 55, pp. 4041–65.10.1016/j.actamat.2007.01.038 ↗
3. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–74.10.1016/j.actamat.2003.08.032 ↗
4. V. Turlo and T.J. Rupert: Acta Mater., 2018, vol. 151, pp. 100–11.10.1016/j.actamat.2018.03.055 ↗
5. T.J. Rupert, W. Cai, and C.A. Schuh: Wear., 2013, vol. 298, pp. 120–6.10.1016/j.wear.2013.01.021 ↗
6. R. Rementeria, M.M. Aranda, C. Garcia-Mateo, and F.G. Caballero: Mater. Sci. Technol., 2016, vol. 32, pp. 308–12.10.1080/02670836.2015.1132048 ↗
7. T.J. Rupert and C.A. Schuh: Acta Mater., 2010, vol. 58, pp. 4137–48.10.1016/j.actamat.2010.04.005 ↗
8. H.V. Atkinson: Acta Metall., 1988, vol. 36, pp. 469–91.10.1016/0001-6160(88)90079-X ↗
9. D.S. Gianola, S. Van Petegem, M. Legros, S. Brandstetter, H. Van Swygenhoven, and K.J. Hemker: Acta Mater., 2006, vol. 54, pp. 2253–63.10.1016/j.actamat.2006.01.023 ↗
10. L. Lu, M.L. Sui, and K. Lu: Acta Mater., 2001, vol. 49, pp. 4127–34.10.1016/S1359-6454(01)00248-8 ↗
11. L. Li, T. Ungár, Y.D. Wang, G.J. Fan, Y.L. Yang, N. Jia, Y. Ren, G. Tichy, J. Lendvai, H. Choo, and P.K. Liaw: Scripta Mater., 2009, vol. 60, pp. 317–20.10.1016/j.scriptamat.2008.10.031 ↗
12. L. Li, T. Ungár, L.S. Toth, W. Skrotzki, Y.D. Wang, Y. Ren, H. Choo, Z. Fogarassy, X.T. Zhou, and P.K. Liaw: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 6632–44.10.1007/s11661-016-3753-7 ↗
13. K. Adam, D. Zöllner, and D.P. Field: Model. Simul. Mater. Sci. Eng., 2018, vol. 26, p. 035011.10.1088/1361-651X/aaa146 ↗
14. K.V. Reddy and S. Pal: JOM., 2020, vol. 72, pp. 3977–86.10.1007/s11837-020-04337-8 ↗
15. H.A. Murdoch and C.A. Schuh: J. Mater. Res., 2013, vol. 28, pp. 2154–63.10.1557/jmr.2013.211 ↗
16. J.R. Trelewicz and C.A. Schuh: Phys. Rev. B., 2009, vol. 79, p. 094112.10.1103/PhysRevB.79.094112 ↗
17. A.J. Detor and C.A. Schuh: Acta Mater., 2007, vol. 55, pp. 4221–32.10.1016/j.actamat.2007.03.024 ↗
18. K.V. Reddy and S. Pal: Trans. Indian Inst. Met., 2018, vol. 71, pp. 1721–34.10.1007/s12666-018-1312-1 ↗
19. R. Kirchheim: Acta Mater., 2002, vol. 50, pp. 413–9.10.1016/S1359-6454(01)00338-X ↗
20. J. Wang, R. Janisch, G.K. Madsen, and R. Drautz: Acta Mater., 2016, vol. 115, pp. 259–68.10.1016/j.actamat.2016.04.058 ↗
21. F. Tang, D.S. Gianola, M.P. Moody, K.J. Hemker, and J.M. Cairney: Acta Mater., 2012, vol. 60, pp. 1038–47.10.1016/j.actamat.2011.10.061 ↗
22. W. Sigle, G. Richter, M. Rühle, and S. Schmidt: Appl. Phys. Lett., 2006, vol. 89, p. 121911.10.1063/1.2356322 ↗
23. D. Foley and G.J. Tucker: Model. Simul. Mater. Sci. Eng., 2016, vol. 24, p. 075011.10.1088/0965-0393/24/7/075011 ↗
24. X. Shi and J. Luo: Appl. Phys. Lett., 2009, vol. 94, p. 251908.10.1063/1.3155443 ↗
25. Z. Pan and T.J. Rupert: Acta Mater., 2015, vol. 89, pp. 205–14.10.1016/j.actamat.2015.02.012 ↗
26. C.M. Grigorian and T.J. Rupert: Acta Mater., 2019, vol. 179, pp. 172–82.10.1016/j.actamat.2019.08.031 ↗
27. S. Pal, K.V. Reddy, and C. Deng: Comput. Mater. Sci., 2019, vol. 169, p. 109122.10.1016/j.commatsci.2019.109122 ↗
28. J.D. Schuler and T.J. Rupert: Acta Mater., 2017, vol. 140, pp. 196–205.10.1016/j.actamat.2017.08.042 ↗
29. J.E. Ludy and T.J. Rupert: Scripta Mater., 2016, vol. 110, pp. 37–40.10.1016/j.scriptamat.2015.07.040 ↗
30. S.N. Mathaudhu: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 6020–44.10.1007/s11661-020-06031-5 ↗
31. A. Devaraj, W. Wang, R. Vemuri, L. Kovarik, X. Jiang, M. Bowden, J.R. Trelewicz, S. Mathaudhu, and A. Rohatgi: Acta Mater., 2019, vol. 165, pp. 698–708.10.1016/j.actamat.2018.09.038 ↗
32. A. Kulovits, S.X. Mao, and J.M.K. Wiezorek: Acta Mater., 2008, vol. 56, pp. 4836–45.10.1016/j.actamat.2008.05.040 ↗
33. H.T. Ni and X.Y. Zhang: Philos. Mag. Lett., 2012, vol. 92, pp. 202–10.10.1080/09500839.2011.652686 ↗
34. K.V. Reddy and S. Pal: Comput. Mater. Sci., 2020, vol. 184, p. 109935.10.1016/j.commatsci.2020.109935 ↗
35. K.V. Reddy and S. Pal: J. Appl. Phys., 2020, vol. 127, p. 154305.10.1063/5.0004320 ↗
36. K.V. Reddy and S. Pal: J. Appl. Phys., 2019, vol. 125, p. 095101.10.1063/1.5085750 ↗
37. K.V. Reddy and S. Pal: Steel Res. Int., 2019, vol. 90, p. 1800636.10.1002/srin.201800636 ↗
38. K.V. Reddy and S. Pal: J. Mol. Model., 2021, vol. 27, pp. 1–8.10.1007/s00894-021-04841-x ↗
39. P. Hirel: Comput. Phys. Commun., 2015, vol. 197, pp. 212–9.10.1016/j.cpc.2015.07.012 ↗
40. S. Plimpton: J. Comput. Phys., 1995, vol. 117, pp. 1–19.10.1006/jcph.1995.1039 ↗
41. P.M. Larsen, S. Schmidt, and J. Schiøtz: Model. Simul. Mater. Sci. Eng., 2016, vol. 24, p. 055007.10.1088/0965-0393/24/5/055007 ↗
42. D.J. Evans and B.L. Holian: J. Chem. Phys., 1985, vol. 83, pp. 4069–74.10.1063/1.449071 ↗
43. A. Stukowski: Model. Simul. Mater. Sci. Eng., 2009, vol. 18, p. 015012.10.1088/0965-0393/18/1/015012 ↗
44. R. Krakow, R.J. Bennett, D.N. Johnstone, Z. Vukmanovic, W. Solano-Alvarez, S.J. Lainé, J.F. Einsle, P.A. Midgley, C.M.F. Rae, and R. Hielscher: Proc. R. Soc. A., 2017, vol. 473, p. 20170274.10.1098/rspa.2017.0274 ↗
45. Y.B. Zhang, A. Godfrey, Q. Liu, W. Liu, and D.J. Jensen: Acta Mater., 2009, vol. 57, pp. 2631–9.10.1016/j.actamat.2009.01.039 ↗
46. G. Faraji, H.S. Kim, and H.T. Kashi: Severe Plastic Deformation: Methods, Processing and Properties, Elsevier, Amsterdam, 2018.10.1016/B978-0-12-813518-1.00001-1 ↗
47. N.S. Lee, J.H. Chen, P.W. Kao, L.W. Chang, T.Y. Tseng, and J.R. Su: Scripta Mater., 2009, vol. 60, pp. 340–3.10.1016/j.scriptamat.2008.10.036 ↗
48. H.W. Huang, Z.B. Wang, J. Lu, and K. Lu: Acta Mater., 2015, vol. 87, pp. 150–60.10.1016/j.actamat.2014.12.057 ↗
49. X. Zhou, Y. Liu, G.E. Thompson, G.M. Scamans, P. Skeldon, and J.A. Hunter: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 1373–85.10.1007/s11661-010-0538-2 ↗
50. J.L. Wardini, C.M. Grigorian, and T.J. Rupert: Materials., 2021, vol. 17, p. 101134.