journal article·2021-10

Ultrasonic Effect on the Deformation Behavior and Microstructure Evolution of a TRIP-Assisted Steel

Jiarui Kang, Xun Liu

Publisher page

Abstract

The effect of ultrasonic vibration on the deformation mechanism of a TRIP-assisted steel is comprehensively studied based on micro-tensile tests. Lower flow stress and work hardening rate are observed in ultrasonically assisted (UA) conditions. Digital image correlation (DIC) analysis reveals the change in strain distribution and formation of Luders-like deformation bands under superimposed UA. Electron backscatter diffraction (EBSD) characterization shows that at the same strain, UA reduces the fraction of retained austenite that is transformed to martensite, indicating a delayed martensitic transformation process. Additionally, EBSD reveals less low-angle grain boundaries and geometrically necessary dislocations with UA. All these microstructure modifications contribute to reduced flow stress and the change of strain distribution during deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. O. Bouaziz, H. Zurob, and M. Huang: Steel Res. Int., 2013, vol. 84, pp. 937–47. .10.1002/srin.201200288 ↗
2. M.J. Sohrabi, M. Naghizadeh, and H. Mirzadeh: Arch. Civ. Mech. Eng., 2020, vol. 20, p. 124. .10.1007/s43452-020-00130-1 ↗
3. P.J. Jacques, Q. Furnémont, F. Lani, T. Pardoen, and F. Delannay: Acta Mater., 2007, vol. 55, pp. 3681–93. .10.1016/j.actamat.2007.02.029 ↗
4. S. Kumar, C.S. Wu, G.K. Padhy, and W. Ding: J. Manuf. Process., 2017, vol. 26, pp. 295–322. .10.1016/j.jmapro.2017.02.027 ↗
5. F. Blaha and B. Langenecker: Naturwissenschaften., 1955, vol. 42, pp. 1–10. .10.1007/BF00623773 ↗
6. K.F. Graff: Ultrasonic Metal Forming: Materials, in Power Ultrasonics. J.A. Gallego-Juárez and K.F. Graff, eds., Woodhead Publishing, Oxford, 2015, pp. 337–76.10.1016/B978-1-78242-028-6.00014-4 ↗
7. B. Langenecker: IEEE Trans. Sonics Ultrason., 1966, vol. 13, pp. 1–8. .10.1109/T-SU.1966.29367 ↗
8. N.A. Tyapunina, V.V. Blagoveshchenskii, G.M. Zinenkova, and Y.A. Ivashkin: Sov. Phys. J., 1982, vol. 25, pp. 569–78. .10.1007/BF00898751 ↗
9. H. Huang, A. Pequegnat, B.H. Chang, M. Mayer, D. Du, and Y. Zhou: J. Appl. Phys., 2009, vol. 106, p. 113514. .10.1063/1.3266170 ↗
10. I. Lum, H. Huang, B.H. Chang, M. Mayer, D. Du, and Y. Zhou: J. Appl. Phys., 2009, vol. 105, p. 024905. .10.1063/1.3068352 ↗
11. T. Jimma, Y. Kasuga, N. Iwaki, O. Miyazawa, E. Mori, K. Ito, and H. Hatano: J. Mater. Process. Technol., 1998, vol. 80–81, pp. 406–12. .10.1016/S0924-0136(98)00195-2 ↗
12. C. Bunget and G. Ngaile: Ultrasonics., 2011, vol. 51, pp. 606–16. .10.1016/j.ultras.2011.01.001 ↗
13. J.-C. Hung and C. Hung: Ultrasonics., 2005, vol. 43, pp. 692–8. .10.1016/j.ultras.2005.03.001 ↗
14. R. Cheng, N. Wiley, M. Short, X. Liu, and A. Taub: Procedia Manuf., 2019, vol. 34, pp. 186–92. .10.1016/j.promfg.2019.06.137 ↗
15. G.A. Malygin: Phys. Solid State., 2000, vol. 42, pp. 72–8. .10.1134/1.1131170 ↗
16. G.E. Nevill: Effect of vibrations on the yield strength of a low carbon steel, Rice University, 1957.
17. H.O.K. Kirchner, W.K. Kromp, F.B. Prinz, and P. Trimmel: Mater. Sci. Eng., 1985, vol. 68, pp. 197–206. .10.1016/0025-5416(85)90409-4 ↗
18. Y. Daud, M. Lucas, and Z. Huang: J. Mater. Process. Technol., 2007, vol. 186, pp. 179–90. .10.1016/j.jmatprotec.2006.12.032 ↗
19. M. Hoseini, M. Shalvandi, and A. Salimiasl: Modares Mech. Eng., 2018, vol. 18, pp. 40–5. .
20. R.K. Dutta, R.H. Petrov, R. Delhez, M.J.M. Hermans, I.M. Richardson, and A.J. Böttger: Acta Mater., 2013, vol. 61, pp. 1592–602. .10.1016/j.actamat.2012.11.036 ↗
21. K.W. Siu and A.H.W. Ngan: Mater. Sci. Eng. A., 2013, vol. 572, pp. 56–64. .10.1016/j.msea.2013.02.037 ↗
22. K.W. Siu, A.H.W. Ngan, and I.P. Jones: Int. J. Plast., 2011, vol. 27, pp. 788–800. .10.1016/j.ijplas.2010.09.007 ↗
23. F. Ahmadi, M. Farzin, and M. Mandegari: Ultrasonics., 2015, vol. 63, pp. 111–7. .10.1016/j.ultras.2015.06.015 ↗
24. C.J. Wang, Y. Liu, B. Guo, D.B. Shan, and B. Zhang: Mater. Des., 2016, vol. 112, pp. 246–53. .10.1016/j.matdes.2016.09.042 ↗
25. H. Zhou, H. Cui, and Q.H. Qin: J. Mater. Process. Technol., 2018, vol. 251, pp. 146–59. .10.1016/j.jmatprotec.2017.08.021 ↗
26. T. Liu, J. Lin, Y. Guan, Z. Xie, L. Zhu, and J. Zhai: Ultrasonics., 2018, vol. 89, pp. 26–33. .10.1016/j.ultras.2018.04.006 ↗
27. T. Wen, L. Wei, X. Chen, and C. Pei: Int. J. Miner. Metall. Mater., 2011, vol. 18, pp. 70–6. .10.1007/s12613-011-0402-4 ↗
28. J. Kang, X. Liu, and M. Xu: Mater. Sci. Eng. A, 2020, vol. 785, p. 139364.10.1016/j.msea.2020.139364 ↗
29. ArcelorMittal: TRIP (TRansformation Induced Plasticity) steels, https://automotive.arcelormittal.com/products/flat/first_gen_AHSS/TRIP. Accessed 23 June 2021.
30. H. Li, G. Sun, G. Li, Z. Gong, D. Liu, and Q. Li: Mater. Des., 2011, vol. 32, pp. 3272–9. .10.1016/j.matdes.2011.02.035 ↗
31. A.W. Wilson, J.D. Madison, and G. Spanos: Scr. Mater., 2001, vol. 45, pp. 1335–40. .10.1016/S1359-6462(01)01137-X ↗
32. M.M. Nowell, S.I. Wright, and J.O. Carpenter: in Materials Processing and Texture. John Wiley & Sons, Inc., Hoboken, NJ, 2008, pp. 285–92.10.1002/9780470444191.ch31 ↗
33. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao: Scr. Mater., 2010, vol. 63, pp. 815–8. .10.1016/j.scriptamat.2010.06.023 ↗
34. L. Luo, W. Li, L. Wang, S. Zhou, and X. Jin: Mater. Sci. Eng. A., 2017, vol. 682, pp. 698–703. .10.1016/j.msea.2016.11.017 ↗
35. Z.H. Cai, H. Ding, R.D.K. Misra, and Z.Y. Ying: Acta Mater., 2015, vol. 84, pp. 229–36. .10.1016/j.actamat.2014.10.052 ↗
36. X.G. Wang, L. Wang, and M.X. Huang: Mater. Sci. Eng. A., 2016, vol. 674, pp. 59–63. .10.1016/j.msea.2016.07.054 ↗
37. M. Zhang, R. Li, J. Ding, H. Chen, J.-S. Park, J. Almer, and Y.-D. Wang: Mater. Res. Lett., 2018, vol. 6, pp. 662–7. .10.1080/21663831.2018.1530698 ↗
38. Y. Zhang and H. Ding: Mater. Sci. Eng. A., 2018, vol. 733, pp. 220–3. .10.1016/j.msea.2018.07.052 ↗
39. H. Wang, Y. Zhang, G. Yuan, J. Kang, Y. Wang, R.D.K. Misra, and G. Wang: Mater. Sci. Eng. A., 2018, vol. 737, pp. 176–81. .10.1016/j.msea.2018.09.045 ↗
40. T. Brlić, S. Rešković, F. Vodopivec, and I. Jandrlić: Metalurgija., 2018, vol. 57, pp. 357–9. .
41. S.J. Kim, C.G. Lee, I. Choi, and S. Lee: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2001, vol. 32, pp. 505–14.10.1007/s11661-001-0067-0 ↗
42. K. Lee, J.H. Ryu, S.W. Lee, W.H. Lee, J.I. Kim, and D.W. Suh: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2016, vol. 47, pp. 5259–65.10.1007/s11661-016-3699-9 ↗
43. C.H. Seo, K.H. Kwon, K. Choi, K.H. Kim, J.H. Kwak, S. Lee, and N.J. Kim: Scr. Mater., 2012, vol. 66, pp. 519–22. .10.1016/j.scriptamat.2011.12.026 ↗
44. R. Blondé, E. Jimenez-Melero, L. Zhao, J.P. Wright, E. Brück, S. Van Der Zwaag, and N.H. Van Dijk: Acta Mater., 2012, vol. 60, pp. 565–77. .10.1016/j.actamat.2011.10.019 ↗
45. Y.B. Xu, Y. Zou, Z.P. Hu, D.T. Han, S.Q. Chen, and R.D.K. Misra: Mater. Sci. Eng. A., 2017, vol. 698, pp. 126–35. .10.1016/j.msea.2017.05.058 ↗
46. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng. A., 2010, vol. 527, pp. 2738–46. .10.1016/j.msea.2010.01.004 ↗
47. Y. Sakuma, D.K. Matlock, and G. Krauss: Metall. Trans. A., 1992, vol. 23, pp. 1221–32. .10.1007/BF02665053 ↗
48. J.H. Ryu, J.I. Kim, H.S. Kim, C.-S. Oh, H.K.D.H. Bhadeshia, and D.-W. Suh: Scr. Mater., 2013, vol. 68, pp. 933–6. .10.1016/j.scriptamat.2013.02.026 ↗
49. M. Naghizadeh and H. Mirzadeh: Steel Res. Int., 2019, vol. 90, p. 1900153. .10.1002/srin.201900153 ↗
50. Z.C. Li, H. Ding, R.D.K. Misra, and Z.H. Cai: Mater. Sci. Eng. A., 2017, vol. 679, pp. 230–9. .10.1016/j.msea.2016.10.042 ↗
51. E. Emadoddin, A. Akbarzadeh, and G.H. Daneshi: Mater. Sci. Eng. A., 2007, vol. 447, pp. 174–9. .10.1016/j.msea.2006.10.046 ↗
52. C. Chisholm, H. Bei, M.B. Lowry, J. Oh, S.A. Syed Asif, O.L. Warren, Z.W. Shan, E.P. George, and A.M. Minor: Acta Mater., 2012, vol. 60, pp. 2258–64.10.1016/j.actamat.2011.12.027 ↗
53. Y. Tomita and T. Iwamoto: Int. J. Mech. Sci., 1995, vol. 37, pp. 1295–305. .10.1016/0020-7403(95)00039-Z ↗
54. S. Curtze, V.T. Kuokkala, M. Hokka, and P. Peura: Mater. Sci. Eng. A., 2009, vol. 507, pp. 124–31. .10.1016/j.msea.2008.11.050 ↗
55. X. Liu, S. Lan, and J. Ni: Mater. Sci. Eng. A., 2013, vol. 582, pp. 211–8. .10.1016/j.msea.2013.03.092 ↗
56. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–8. .10.1016/0001-6160(53)90083-2 ↗
57. T. Suzuki, H. Kojima, K. Suzuki, T. Hashimoto, S. Koike, and M. Ichihara: Scr. Metall., 1976, vol. 10, pp. 353–8. .10.1016/0036-9748(76)90091-0 ↗
58. E. Cakmak, H. Choo, K. An, and Y. Ren: Acta Mater., 2012, vol. 60, pp. 6703–13. .10.1016/j.actamat.2012.08.040 ↗