A Multiscale-Based Approach to Understand Dendrite Deflection in Continuously Cast Steel Slab Samples
Source abstract
Abstract
Abstract Dendrite bending angle measurements were conducted along two different directions on four steel slab samples collected from a conventional caster. The primary dendrites growing at the slab surface showed a transition in their growth direction as the distance from the surface increased. Numerical fluid flow simulation showed changes in the flow directions that might have caused the change in the growth direction. The bending angle measurements were also correlated with the casting process parameters. Thereafter, a multiscale approach was adopted to predict the dendrite deflection angles by correlating the macro-scale flow profile with the micro-scale bending angle formulation and subsequently corroborated with the industrial scale measurements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. S. Louhenkilpi: Treatise on Process Metallurgy, vol. 3, Elsevier, Oxford, 2014, pp. 373-434.10.1016/B978-0-08-096988-6.00007-9 ↗
2. [2] D. Senk, B. Engl, O. Siemon and G. Stebner: Steel Research, 1999, vol. 70, pp. 368–72.10.1002/srin.199905655 ↗
3. [3] E.J. Pickering: ISIJ Int., 2013, vol. 53, pp. 935–4910.2355/isijinternational.53.935 ↗
4. [4] H. Esaka, F. Suter and S. Ogibayashi: ISIJ Int., 1996, vol. 36, pp. 1264–72.10.2355/isijinternational.36.1264 ↗
5. [5] A. Viardin, M. Zaloznik, Y. Souhar, M. Apel and H. Combeau: Acta Materialia, 2017, vol. 122, pp. 386-99.10.1016/j.actamat.2016.10.004 ↗
6. [6] S. G. Kim, W. T. Kim, and T. Suzuki: Phys. Rev. E, 1999, vol. 60, pp. 7186-97.10.1103/PhysRevE.60.7186 ↗
7. [7] N. Provatas and K. Elder: Phase-Field Methods in Material Science and Engineering, 1st edn., Wiley, New York, 2010.10.1002/9783527631520 ↗
8. [8] S. Luo, M. Zhu, and S. Louhenkilpi: ISIJ Int., 2012, vol. 52, pp. 823-30.10.2355/isijinternational.52.823 ↗
9. C. Sarkis: Material chemistry. Université Paris sciences et lettres, 2016.
10. [10] T. Takahashi, K. Ichikawa, M. Kudou and K. Shimahara: Tetsu-to-Hagane, 1975, vol. 61, pp. 2198–2213.10.2355/tetsutohagane1955.61.9_2198 ↗
11. [11] M.F. Zhu, T. Dai, S.Y. Lee and C.P. Hong: Comput. Math. with Appl., 2008, vol. 55, pp. 1620–28.10.1016/j.camwa.2007.08.023 ↗
12. [12] M.X. Liu, K. Wang, D. Xia and T. Jiang: J. Alloys Compd., 2014, vol. 589, pp. 431–35.10.1016/j.jallcom.2013.11.108 ↗
13. [13] L. Qiang, Y. Xiang-Jie and L. Zhi-Ling: J. Appl. Sci., 2013, vol. 13, pp. 2700–04.10.3923/jas.2013.2700.2704 ↗
14. [14] H. Barati, M.R. Aboutalebi, S.G. Shabestari and S.H. Seyedein: Can. Metall. Q., 2011, vol. 50, pp. 408–15.10.1179/000844311X13117643274712 ↗
15. [15] A. Sengupta, B. Santillana, S. Sridhar and M. Auinger: JOM, 2019, vol. 71, No. 11, pp. 3876-84.10.1007/s11837-019-03730-2 ↗
16. [16] S. Okano, T. Nishimura, H. Ooi and T. Chino: Tetsu-to-Hagané., 1975, vol. 61, pp. 2982–90.10.2355/tetsutohagane1955.61.14_2982 ↗
17. [17] S-M. Cho and B.G. Thomas: Metals, 2019, vol. 9, 471, pp. 1–38.
18. [18] X. Wang, S. Wang, L. Zhang, S. Sridhar, A. Conejo and X. Liu: Metall. And Mat. Trans. A, 2016, vol. 47A, pp. 5496—5509.10.1007/s11661-016-3695-0 ↗
19. [19] R. Liu, B.G. Thomas, J. Sengupta, S.D. Chung and M. Trinh: ISIJ Int., 2014, vol. 54, pp. 2314–23.10.2355/isijinternational.54.2314 ↗
20. [20] T. Zhang, J. Yang and P. Jiang: Metals, 2019, vol. 9, 36, pp. 1–15.
21. [21] B.G. Thomas and L. Zhang: ISIJ., 2001, vol. 41, pp. 1181–93.10.2355/isijinternational.41.1181 ↗
22. [22] B.G. Thomas, L.J. Mika and F.M. Najjar: Metall. Trans. B., 1990, vol. 21, pp. 387–400.10.1007/BF02664206 ↗
23. G.F. VanderVoort: Metallography Principles and Practice, McGraw-Hill Book Co., New York, 1999.
24. [24] S. Béchet and L. Beaujard: Rev. Métallurgie., 1955, vol. 52, pp. 830–36.10.1051/metal/195552100830 ↗
25. A. SenGupta, B. Santillana, S. Sridhar and M. Auinger: IOP Conf. Series Materials Science and Engineering, 2019, vol. 529, 012065.10.1088/1757-899X/529/1/012065 ↗
26. S. Kholmatov: Tata Steel Research and Development, IJmuiden, The Netherlands, unpublished research, 2011.
27. M. I. HaqueSiddiqui and P. K. Jha: ISIJ International, 2014, vol. 54, No. 11, pp. 2578–87.10.2355/isijinternational.54.2578 ↗
28. [28] K. Timmel, X. Miao, T. Wondrak, F. Stefani, D. Lucas, S. Eckerta and G. Gerbeth: Eur. Phys. J. Special Topics, 2013, vol. 220, pp. 151–66.10.1140/epjst/e2013-01804-5 ↗
29. [29] L. Zhong, M. Zeze and K. Mukai: ISIJ Int., 2005, vol. 45, pp. 312–15.10.2355/isijinternational.45.312 ↗
30. [30] R. Chaudhary, B.G. Thomas and S.P. Vanka: Metall. Mater. Trans. B., 2012, vol. 43B, pp. 532–53.10.1007/s11663-012-9634-6 ↗
31. [31] K. Jin, S.P. Vanka and B.G. Thomas: Metall. Mater. Trans. B., 2018, vol. 49B, pp. 1360–77.10.1007/s11663-018-1191-1 ↗
32. [32] L. Xu, E. Wang, C. Karcher, A. Deng and X. Xu: Metall. Mater. Trans. B., 2018, vol. 49, pp. 2779–93.10.1007/s11663-018-1342-4 ↗
33. [33] Y. Meng and B.G. Thomas: Metall. Mater. Trans. B., 2003, vol. 34B, pp. 685–705.10.1007/s11663-003-0040-y ↗
34. [34] M. Sadat, A. Gheysari and S. Sadat: Heat Mass Transf., 2011, vol. 47, pp. 1601–0910.1007/s00231-011-0822-8 ↗
35. [35] K. Cukierski and B.G. Thomas: Metall. Mater. Trans. B., 2008, vol. 39B, pp. 94–107.10.1007/s11663-007-9109-3 ↗
36. [36] S.Y. Lee, S.M. Lee and C.P. Hong: ISIJ Int., 2000, vol. 40, pp. 48–57.10.2355/isijinternational.40.48 ↗
37. [37] S. Talas: Materials and Design, 2010, vol. 31, pp. 2649-53.10.1016/j.matdes.2009.11.066 ↗
38. [38] M. Long, L. Zhang and F. Lu: ISIJ Int., 2010, vol. 50, pp. 1792–96.10.2355/isijinternational.50.1792 ↗