Martensite Transformation Start Temperature During Quench and Austempering in Fe-8Ni-0.2C Alloys
Source abstract
Abstract
It is important for the improvement of mechanical properties of quenching and partitioning (QP) steels to control the martensite transformation behavior and the stability of untransformed austenite. In this study, we evaluated the martensite transformation restart temperature (Mr) via a dilatometer during the reheat austempering pattern. This heat pattern corresponding to the typical heat treatment for QP steel involves quenching to TQ, a temperature between the martensite transformation start temperature (Ms) and the finish temperature, and austempering above Ms. In Fe-8Ni-0.2C alloy, Mr equals TQ, regardless of the progress of bainite transformation during austempering at 673 K (400 °C). In Fe-8Ni-1Si-0.2C alloy, Mr decreases parabolically from TQ with the progress of bainite transformation, and this behavior corresponds to the assumed carbon concentration by bainite transformation. These results indicate that the self-stabilization of the entire untransformed austenite during the first quench from Ms to TQ was preserved, regardless the bainite transformation. Moreover, the stabilization by the carbon concentration in untransformed austenite was added to this self-stabilization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. K. Zhu, H. Chen, J.-P. Masse, O. Bouaziz, and G. Gachet: Acta Mater., 2013, vol. 61, pp. 6025–3610.1016/j.actamat.2013.06.043 ↗
2. M. Takahashi: ISIJ Int., 2015, vol. 55, pp. 79–8810.2355/isijinternational.55.79 ↗
3. O. Bouaziz, H. Zurob, and M.X. Huang: Steel Research Int., 2013, vol. 84, 937–4710.1002/srin.201200288 ↗
4. J.N. Hall and J.R. Fekete: Automotive Steels: Design, Metallurgy, Processing and Applications, 1st Ed., edited by R. Rana and S.B. Singh, Elsevier, 2017, pp. 19–45.10.1016/B978-0-08-100638-2.00002-X ↗
5. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–2210.1016/S1359-6454(03)00059-4 ↗
6. D.K. Matlock and J.G. Speer: Design Consideration for the next Generation of Advanced High Strength Sheet Steels, Proc. 3rd Int. Conf. on Structural Steels, ed. by H. C. Lee, Korean Institute of Metals and Materials, Seoul, 2006, p. 774
7. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Engng. A, 2006, vol. 438–440, pp. 25–3410.1016/j.msea.2006.02.133 ↗
8. C.Y. Wang, J. Shi, W.Q. Cao, and H. Dong: Mater. Sci. Engng. A, 2010, vol. 527, pp. 3442–910.1016/j.msea.2010.02.020 ↗
9. M.J. Santfimia, L. Zhao, and J. Sietsma: Metal. Mater. Trans. A, 2011, vol. 42A, pp. 3620-610.1007/s11661-011-0706-z ↗
10. S.Y.P. Allain, G. Geandier, J.–C. Hell, M. Soler, F. Danoix, and M. Gouné: Metals, 2017, vol. 7, pp. 23210.3390/met7070232 ↗
11. A.J. Clarke, J.G. Speer, D.K. Matlock, F.C. Rizzo, D.V. Edmonds, and M.J. Santofimia: Scripta Mater., 2009, vol. 61, pp. 149–5210.1016/j.scriptamat.2009.03.021 ↗
12. M.J. Santfimia, L. Zhao, R. Petrov, C. Kwakernaak, W.G. Sloof, and J. Sietsma: Acta Mater., 2011, vol. 59, pp. 6059–6810.1016/j.actamat.2011.06.014 ↗
13. D. De Knijf, E.P. Da Silva, C. Föjer, and R. Petrov: Mater. Sci. Technol., 2015, vol. 31, pp. 817–2810.1179/1743284714Y.0000000710 ↗
14. E. De Moor, S, Lacroix, A.J. Clarke, J. Penning, and J.G. Speer: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2586–9510.1007/s11661-008-9609-z ↗
15. E. De Moor, J.G. Speer, D.K. Matlock, J.-H. Kwak, and S.-B. Lee: ISIJ Int., 2011, vol. 51, pp. 137–4410.2355/isijinternational.51.137 ↗
16. D.T. Pierce, D.R. Coughlin, D.L. Williamson, K.D. Clarke, A.J. Clarke, J.G. Speer, and E. De Moor: Acta Mater., 2015, vol. 90, pp. 417–3010.1016/j.actamat.2015.01.024 ↗
17. Y. Sakuma, O. Matsumura, and H. Takechi: Metall. Trans. A, 1991, vol. 22A, pp. 489–9810.1007/BF02656816 ↗
18. D. Quidort, and Y.J.M. Brechet: Acta Mater., 2001, vol. 49, pp. 4161–7010.1016/S1359-6454(01)00316-0 ↗
19. S.A. Kahn, and H.K.D.H. Bhadeshia: Mater. Sci. Engng., 1990, vol. A129, pp. 257–7210.1016/0921-5093(90)90273-6 ↗
20. S.M.C. van Bohemen, and D.N. Hanlon: Int. J. Mat. Res., 2012, vol. 103, pp. 987–9110.3139/146.110744 ↗
21. H. Kawata, K. Hayashi, N. Sugiura, N. Yoshinaga, and M. Takahashi: Mater. Sci. Forum, 2009, vol. 638–642, pp. 3307–12
22. Y. Toji, H. Matsuda, and D. Raabe: Acta Mater., 2016, vol. 116, pp. 250–6210.1016/j.actamat.2016.06.044 ↗
23. J. Sun, and H. Yu: Mater. Sci. Engng. A, 2013, vol. 586, pp. 100–710.1016/j.msea.2013.08.021 ↗
24. X.C. Xiong, B. Chen, M.X. Huang, J.F. Wang, and L. Wang: Scripta Mater., 2013, vol. 68, pp. 321–410.1016/j.scriptamat.2012.11.003 ↗
25. D. De Knijf, C. Föjer, L.A.I. Kestens, and R. Petrov: Mater. Sci. Engng. A, 2015, vol. 638, pp. 219–2710.1016/j.msea.2015.04.075 ↗
26. H. Kawata, K. Hayashi, N. Yoshinaga, and M. Takahashi: Proceedings of the 1st International Conference on Automobile Steel (ICAS2016) & the 3rd International Conference on High Manganese Steels (HMnS2016), Chengdu, China, 2016, pp. 402–45.
27. M. Cohen: Metal Progress, 1948, vol. 56, pp. 823–6
28. Q. Huang, B.C. De Cooman, H. Biermann, and J. Mola: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1947–5910.1007/s11661-016-3382-1 ↗
29. N. Nakada, Y. Ishibashim T. Tsuchiyama, and S. Takaki: Acta Mater. 2016, vol. 110, pp. 95–10210.1016/j.actamat.2016.03.048 ↗
30. J. Wang, and S. van der Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527–3910.1007/s11661-001-0240-5 ↗
31. J. Zhao: Mater. Sci. Technol., 1992, vol. 8, pp. 997–100310.1179/mst.1992.8.11.1004 ↗
32. A. Perlade, O. Bouaziz, and Q. Furnémont: Mater. Sci. Engng. A, 2003, vol. 156, pp. 145–5210.1016/S0921-5093(03)00121-7 ↗
33. D.P. Koistinen, and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–6010.1016/0001-6160(59)90170-1 ↗
34. S.M.C. Boheman, and J. Sietsma: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1059–6810.1007/s11661-009-9796-2 ↗
35. A.R. Entwisel: Metall. Trans., 1971, vol. 2, pp. 2395–40710.1007/BF02814877 ↗
36. Y. Imai, and M. Izumiyama: Sci. Rep. Res. Inst. Tohoku Univ. Ser. Phys. Chem. Metall., 1959, vol. 11, pp. 393–400
37. M.E. Blanter, and B.G. Serebrennikova: Met. Sci. Heat Treat., 1972, vol. 14, pp. 567–7010.1007/BF00647864 ↗
38. A. Borgenstam, and M. Hillert: Acta Mater., 1997, vol. 45, pp. 2079–9110.1016/S1359-6454(96)00308-4 ↗
39. R.H. Richman, and G.F. Bolling: Metall. Trans., 1971, vol. 2, pp. 2451–6210.1007/BF02814882 ↗
40. M. Zhang, Y.H. Wang, C.L. Zheng, F.C. Zhang, and T.S. Wang: Mater. Sci. Engng. A, 2014, vol. 596, pp. 9–1410.1016/j.msea.2013.11.097 ↗
41. S.V. Radcliffe, and M. Schatz: Acta Metall., 1962, vol. 10, pp. 201–710.1016/0001-6160(62)90117-7 ↗
42. G.F. Bolling, and R.H. Richman: Scripta Metall., 1970, vol. 4, pp. 539–4410.1016/0036-9748(70)90012-8 ↗
43. V.D. Blank, and E.I. Estrin: Phase transitions in solids under high pressure, CRC Press, Boca Raton, 201310.1201/b15943 ↗
44. A.S. Sastri, and D.R.F. West: J. Iron Steel Inst., 1965, vol. 203, pp. 138–45
45. S. Takaki, K. Fukunaga, J. Syarif, and T. Tsuchiyama: Mater. Trans., 2004, vol. 45, pp. 2245–5110.2320/matertrans.45.2245 ↗
46. H.S. Yang, and H.K.D.H. Bhadeshia: Scripta Mater., 2009, vol. 60, pp. 493–510.1016/j.scriptamat.2008.11.043 ↗
47. G. Miyamoto, A. Shibata, T. Maki, and T. Furuhara: Acta Mater., 2009, vol. 57, pp. 1120–3110.1016/j.actamat.2008.10.050 ↗
48. M. Gouné, F. Danoix, S. Allain, and O. Bouaziz: Scripta Mater., 2013, vol. 68, pp. 1004–710.1016/j.scriptamat.2013.02.058 ↗
49. H. Kawata, K. Fujiwaram and M. Takahashi: ISIJ Int., 2017, vol. 57, pp. 1866–7310.2355/isijinternational.ISIJINT-2017-239 ↗
50. S.Y.P. Allain, G. Geandier, J.C. Hell, M. Soler, F. Danoix, and M. Gouné: Scripta Mater., 2017, vol. 131, 15–1810.1016/j.scriptamat.2016.12.026 ↗
51. W. Wu, Y-W. Wang, P. Makrygiannis, F. Zhu, G.A. Thomas, L.G. Hector Jr., X. Hu, X. Sun, and Y. Ren: Mater. Sci. Engng. A, 2018, vol. 711, 611–2310.1016/j.msea.2017.11.008 ↗
52. F. Abu-Farha, X. Hu, X. Sun, Y. Ren, L.G. Hector Jr., G. Thomas, and T.W. Brown: Metall. Mater. Trans. A, 2018, vol. 49A, 2583–9610.1007/s11661-018-4660-x ↗
53. V.F. Zackay, E.R. Parker, D. Fahr, and R. Bush: Trans. ASM, 1967, vol. 60, pp. 252–9
54. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–30310.1016/j.cossms.2004.10.002 ↗
55. T. Furukawa: Mater. Sci. Technol., 1989, vol. 5, pp. 465–7010.1179/mst.1989.5.5.465 ↗
56. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1238–4310.2355/isijinternational.43.1238 ↗
57. K. Sugimoto, A. Kanda, R. Kikuchi, S. Hashimoto, T. Kashima, and S. Ikeda: ISIJ Int., 2002, vol. 42, pp. 910–510.2355/isijinternational.42.910 ↗
58. L. Liu, B. He, and M. Huang: Adv. Eng. Mater., 2018, vol. 20, 170108310.1002/adem.201701083 ↗
59. R.G. Stringfellow, D.M. Parks, and G.B. Olson: Acta Metall. Mater., 1992, vol. 40, pp. 1703–1610.1016/0956-7151(92)90114-T ↗
60. H. Onodera, H. Oka, and I. Tamura: J. Japan Inst. Met. Mater., 1978, vol. 42, pp. 898–905 (in Japanese)10.2320/jinstmet1952.42.9_898 ↗
61. I. Tamura: Metal Sci., 1982, vol. 16, pp. 245–25310.1179/030634582790427316 ↗
62. S. Allain, and O. Bouaziz: Mater. Sci. Engng. A, 2008, vol. 496, pp. 329–3610.1016/j.msea.2008.06.009 ↗
63. S. Harjo, N. Tsuchida, T. Shinohara, and W. Gong: Sci. Rep., 2017, vol. 7, 1514910.1038/s41598-017-15252-5 ↗
64. H. Kawata, T. Yasutomi, S. Shirakami, K. Nakamura, and E. Sakurada: ISIJ Int., 2021, vol. 61.10.2355/isijinternational.ISIJINT-2020-382 ↗