Microstructural Characterization and Failure Analysis of a Wear-Resistant, High Molybdenum and Chromium White Iron Used for Metal-to-Metal Wear Systems
Source abstract
Abstract
An Fe-15Mo-18Cr-3.3C-1.65V white iron has been widely used in industries for many years due to its excellent wear performance, but never been reported to academic circle. This paper studied its phase constituents in as-cast condition and its wear performance for metal-to-metal contact wear applications. Microstructural analyses were performed using optical microscopy and scanning electron microscopy with phase identification performed using a transmission Kikuchi diffraction (TKD) technique. A solidification sequence was proposed by correlating thermodynamic equilibrium calculations with the distribution and size of the phase constituents. Field-returned components were analyzed after approximately 10,000 service hours. Micro-galling defects exhibited regions of material flow, white layer formation, subsurface cracking, and material loss. For the first time, white layer was found in a highly alloyed white iron, which was determined to be nanocrystalline with an average grain size less than 15 nm and a phase constitution similar to the base metal. Material loss contributed to abrasive wear scars and eventual leakage of the lubricant protecting the wear components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. X. Ai, and C. A. Moyer: Modern Tribology Handbook, 2nd ed., CRC, Boca Raton, 2001, pp. 1041-93.
2. H. S. Cheng: Modern Tribology Handbook, 2nd ed., CRC, Boca Raton, 2001, pp. 1095-1129.
3. R. F. Salant: Modern Tribology Handbook, 2nd ed., CRC, Boca Raton, 2001, pp. 1131-1157.
4. J. A. Hawk, R. D. Wilson, J. H. Tylczak and O. N. Dogan: Wear, 1999, vol. 225, pp. 1031-1042.10.1016/S0043-1648(99)00042-3 ↗
5. M. Riddihough: Tribology, 1970, vol. 3, no. 4, pp. 211-215.10.1016/0041-2678(70)90058-8 ↗
6. K. C. Antony: J. Met., 1983, vol. 35, no. 2, pp. 52-60.
7. J. Shin, J. Doh, J. Yoon, D. Lee, and J. Kim: Surf. Coat. Technol., 2003, vol. 166, no. 2-3, pp. 117-126.10.1016/S0257-8972(02)00853-8 ↗
8. H. Berns and W. Theisen: Ferrous Materials, Bochum, Springer, 2008, p. 103.
9. B. Basu, and M. Kalin, Tribology of Ceramics and Composites: A Materials Science Perspective. Wiley, New York, 2011.10.1002/9781118021668 ↗
10. J. F. Archard: Wear, 1958, vol. 2, pp. 438-455.10.1016/0043-1648(59)90159-0 ↗
11. A. H. Abdel-Aal: Encyclopedia of Tribology, Boston, Springer, 2013.
12. G. Sutter, and N. Ranc: Wear, 2010, vol. 268, no. 11-12, pp. 1237-1242.10.1016/j.wear.2010.01.019 ↗
13. F. E. Kennedy: in Modern Tribology Book, 2nd ed., CRC, 2001, pp. 235–72.
14. L. J. Gschwender, D. C. Kramer, B. K. Lok, S. K. Sharma, C. E. Snyder, and M. L. Sztenderowicz: Modern Tribology handbook, 2nd ed., CRC, Boca Raton, 2001, pp. 361-373.
15. P. C. Okonkwo, G. Kelly, B. F. Rolfe and M. P. Pereira: Wear, 2012, vol. 282, no. 5, pp. 22-30.10.1016/j.wear.2012.01.017 ↗
16. V. L. Ratia, D. Zhang, M. J. Carrington, J. L. Daure, D. G. McCartney, P. H. Shipway and D. A. Stewart: Wear, 2018, vol. 420-421, pp. 215-225.
17. W. Molnar, A. Nevosad, H. Rojacz, K. Adam, H. J. Henze, M. R. Ripoll, and E. Badisch: Wear, 2018, Vols. 414-415, pp. 174-181.10.1016/j.wear.2018.08.015 ↗
18. H. Rojacz, H. Pahr, S. Baumgartner, and M. Varga: Tribol. Int., 2017, vol. 113, pp. 487-499.10.1016/j.triboint.2017.01.039 ↗
19. A. Gaard, N. Hallback, P. Krakhmalev and J. Bergstrom: Wear, 2010, vol. 268, no. 7, pp. 968-975.10.1016/j.wear.2009.12.007 ↗
20. G. Guerrini, F. Lerra, and A. Fortunato: Journal of Manufacturing Processes, 2019, vol. 45, pp. 234-241.10.1016/j.jmapro.2019.07.006 ↗
21. A. Alok, and M. Das: Journal of Manufacturing Processes, 2019, vol. 46, pp. 16-25.10.1016/j.jmapro.2019.08.016 ↗
22. R.D. Gruiter: Report on White Layer In Hard Turning, Hembrug Machine Tools, 2015.
23. D. Kurten, I. Khader, R. Raga, P. Casajus, N. Winzer, A. Kailer, R. Spallek, and M. Scherge: Eng. Failure Anal., 2019, vol. 99, pp. 330-342.10.1016/j.engfailanal.2019.02.030 ↗
24. L. Xin, M. Ma, Y. Lu, and T. Shoi: Wear, 2019, Vols. 418-419, pp. 167-179.10.1016/j.wear.2018.11.029 ↗
25. P. Palit, S. Das, and J. Mathur: Case Studies in Engineering Failure Analysis, 2015, vol. 4, pp. 83-87.10.1016/j.csefa.2015.09.003 ↗
26. S. S. Bosheh, and P. T. Mativenga: International Journal of Machine Tools & Manufacture, 2006, vol. 46, pp. 225-233.10.1016/j.ijmachtools.2005.04.009 ↗
27. F. Klocke, E. Brinksmeier, and K. Weinert: Annals of CIRP, 2005, vol. 54, no. 2, pp. 22-45.10.1016/S0007-8506(07)60018-3 ↗
28. S. Smith, S.N. Melkote, L. Curzio, E.T. Watkins, R. Allard, and L. Riester: Mater. Sci. Eng. A, 2007, vol. 459, pp. 337-346.10.1016/j.msea.2007.01.011 ↗
29. Y.B. Guo, and G.M. Janowski: Transactions of NAMRI/SME, 2004, vol. 32, pp. 367-374.
30. D. Cho, S. Lee, and Y. Lee: Tribol. Lett., 2012, vol. 45, pp. 123-129.10.1007/s11249-011-9869-4 ↗
31. E. Abbasi, Q. Luo, and D. Owens: Wear, 2018, Vols. 398-399, pp. 29-40.10.1016/j.wear.2017.11.014 ↗
32. K. D. Vo, A. K. Tieu, H. T. Zhu, and P. B. Kosasih: Wear, 2015, Vols. 330-331, pp. 571-580.10.1016/j.wear.2015.01.059 ↗
33. S. Han, S. N. Melkote, M. S. Haluska, and T. R. Watkins: Mater. Sci. Eng. A, 2008, vol. 488, pp. 195-204.10.1016/j.msea.2007.11.081 ↗
34. A. Attanasio, D. Umbrello, C. Cappellini, G. Rotella, and R. M’Saoubo: Wear, 2012, Vols. 286-287, pp. 98-107.10.1016/j.wear.2011.07.001 ↗
35. S. B. Hosseini, T. Beno, U. Klement, J. Kaminski, and K. Ryttberg: J. Mater. Process. Technol., 2014, vol. 214, pp. 1293-1300.10.1016/j.jmatprotec.2014.01.016 ↗
36. S. B. Hosseini, M. Thuvander, U. Klement, G. Sundell, and K. Ryttberg: Acta Mater., 2017, vol. 130, pp. 155-163.10.1016/j.actamat.2017.03.030 ↗
37. R. Hossain, F. Pahlevani, E. Witteveen, A. Banerjee, B. Joe, B. G. Pursty, R. Deppenaar, and V. Sahajwalla: Sci. Rep., 2017, vol. 7, no. 13288, pp. 1-12.
38. F. Zhang, C. Duan, M. Wang, and W. Sun: Journal of Manufacturing Processes, 2018, vol. 32, pp. 878-887.10.1016/j.jmapro.2018.04.011 ↗
39. Annual Book of ASTM Standards, ASTM Designation E407-07, ASTM, 2007.
40. C. A. Johnson, Metallography Principles and Procedures, St. Joseph: LECO Corporation, 1996.
41. S. Liu, Y. Zhou, X. Xing, J. Wang, X. Ren, and Q. Yang: Sci. Rep., 2016, vol. 6, pp. 32941-32946.10.1038/srep32941 ↗
42. R. van Bremen, D. Ribas Gomes, L.T.H. de Jeer, V. Ocelík, and J.T.M. DeHosson: Ultramicroscopy, 2016, vol. 160, pp. 256–64.10.1016/j.ultramic.2015.10.025 ↗
43. P. W. Trimby: Ultramicroscopy, 2012, vol. 120, pp. 16-24.10.1016/j.ultramic.2012.06.004 ↗
44. R.B. Gundlach, ASM Hanbook Volume 15, ASM International, pp. 896–903.
45. J. A. Golczewski, and H. F. Fischmeister: Zeirschrift fur Metallkunde, 1993, vol. 84, p. 860.
46. X. Zhou, X. Yin, F. Fang, J. Jiang, and W. Zhu: J. Rare Earths, 2012, vol. 30, pp. 1075-1078.10.1016/S1002-0721(12)60181-1 ↗
47. J. Wan, Y. Lu, J. Qing, and M. Xu: Metall. Trans. A, 2020.
48. S. B. Hosseini, U. Klement, Y. Yao, and K. Ryttberg: Acta Mater., 2015, vol. 89, pp. 258-267.10.1016/j.actamat.2015.01.075 ↗
49. X. Wu, P. Jiang, L. Chen, F. Yuan, and Y. T. Zhu: PNAS, 2014, vol. 111, no. 20, pp. 7197-7201.10.1073/pnas.1324069111 ↗
50. X. L. Wu, P. Jiang, L. Chen, J. F. Zhang, F. P. Yuan & Y. T. Zhu: Mater. Res. Lett., 2014, vol. 2, no. 4, pp. 185-191.10.1080/21663831.2014.935821 ↗
51. A.M. Wusatowska-Sarnek, B. Dubiel, A. Czyrska-Filemonowicz, P.R. Bhowal, N. BenSalah, and J.E. Klemberg-Sapieha: Metall. Trans. A, 2011, vol. 42A, pp. 3813-3825.10.1007/s11661-011-0779-8 ↗
52. Z. Fan, B. Joni, G. Ribarik, E. Odor, Z. Fogarassy, and T. Ungar: Mater. Sci. Eng. A, 2019, vol. 758, pp. 139-146.10.1016/j.msea.2019.04.094 ↗
53. Z. Wang, J. Han, J. P. Domblesky, Z. Li, and X. Fan: Wear, 2019, Vols. 428-429, pp. 45-54.10.1016/j.wear.2019.01.124 ↗
54. J. Wan, J. Qing and M. Xu: Metall. Trans. A, 2019, vol. 50, no. 3, pp. 1162-1174.10.1007/s11661-018-5068-3 ↗
55. A. Kagawa, T. Okamoto, K. Saito, and M. Ohta: J. Mater. Sci., 1984, vol. 19, pp. 2546-2554.10.1007/BF00550808 ↗
56. J. Wang, W. Guo, H. Sun, H. Li, H. Gou, and J. Zhang: Mater. Sci. Eng. A, 2016, vol. 662, pp. 88-94.10.1016/j.msea.2016.03.062 ↗
57. Y. Yang, H. Fang, Y. Zheng, Z. Yang, and Z. Jiang: Wear, 1995, vol. 185, no. 1-2, pp. 17-22.10.1016/0043-1648(94)06586-1 ↗
58. B. N. J. Persson: Tribol. Lett., 2016, vol. 63, pp. 1-6.10.1007/s11249-016-0728-1 ↗
59. K. Sipos, M. Lopez, and M. Trucco: Revista Latinoamericana de Metalurgia Materiales, 2008, vol. 28, no. 1, pp. 46-50.