journal article·2020-11Open access

Hard Cladding by Supersolidus Liquid Phase Sintering: An Experimental and Simulation Study on Martensitic Stainless Steels

P. K. Farayibi, M. Blüm, S. Weber

Abstract

Abstract Martensitic stainless steels are suitable for diverse structural applications but degrade when subjected to wear-prone activities in service. To enhance their service life, the densification of high Cr, martensitic, X190CrVMo20-4-1 tool steel powder on two different martensitic stainless steel substrates via supersolidus liquid-phase sinter (SLPS) cladding was investigated. The objective was to assess the influence of the difference in compositions of the martensitic stainless steels employed as substrates on the interfacial diffusion, microstructure, hardness and bonding strength of the steel-to-steel claddings. Computational thermodynamics and diffusion simulations were employed to supplement experimental findings. Owing to interdiffusion, a M7C3 carbide-free, banded region exists in the X190 adjacent to the interface with the width dictated by chemical potential gradient of carbon. The hardness of the substrate was lower near the interface region because of carbon enrichment, which promoted the presence of retained austenite. An interfacial strength of 798 MPa was achieved with fairly ductile X190 matrix near the cladding interface as the fracture surface was characterized by mixed fracture modes of dimple rupture and cleavage with localized quasi-cleavage features. Experimental observations and computational simulations are in agreement. The implications of the SLPS cladding technique are discussed in the context of tool development.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Garrison WM, Amuda MOH (2017) Stainless Steels: Martensitic, Reference Module in Materials Science and Materials Engineering. Elsevier, Amsterdam
2. R. Hill and A.L. Perez: New steels and corrosion-resistant alloys, Trends in Oil and Gas Corrosion Research and Technologies, Woodhead Publisher-Elsevier, 2017, pp. 613–26.
3. T.B. Hilditch, T. de Souza, P.D. Hodgson: Properties and automotive applications of advanced high-strength steels (AHSS), Welding and Joining of Advanced High Strength Steels (AHSS), Woodhead Publisher-Elsevier, 2015, pp. 9–28.10.1016/B978-0-85709-436-0.00002-3 ↗
4. Y. Murakami: Martensitic stainless steels. Metal Fatigue, Academic Press-Elsevier Limited 2019, pp. 431–51.
5. M. Blüm, H. Hill, H. Moll, S. Weber, and W. Theisen: J. Mater. Eng. Perform., 2012, vol. 21 (5), pp. 756–63.10.1007/s11665-012-0199-y ↗
6. P.K. Farayibi, T.E. Abioye, A. Kennedy, and A.T. Clare: J. Manuf. Processes, 2019, vol. 45, pp. 429–37.10.1016/j.jmapro.2019.07.029 ↗
7. T.E. Abioye, A. Medrano-Tellez, P.K. Farayibi, and P.K. Oke: Mater. Manuf. Processes, 2017, vol. 32 (14), pp. 1660–66.10.1080/10426914.2017.1292034 ↗
8. G. Lindwall, J. Flyg, K. Frisk, and O. Sandberg: Metall. Mater. Trans. A, 2011, vol. 42 (5), pp. 1165–72.10.1007/s11661-010-0480-3 ↗
9. M. Eroglu and B. Kurt: Mater. Sci. Technol., 2007, vol. 23 (2), pp. 171–76.10.1179/174328407X154202 ↗
10. H. Wang and S. Yu: Surf. Coat. Technol., 2017, vol. 319, pp. 182–90.10.1016/j.surfcoat.2017.04.013 ↗
11. M. Blüm, W. Theisen, and S. Weber: Metall. Mater. Trans. A, 2018, vol. 49 (10), pp 4991–00.10.1007/s11661-018-4750-9 ↗
12. P.K. Farayibi, M. Blüm, W. Theisen, S. Weber: J. Mater. Eng. Perform., 2019, vol. 28 (3), pp. 1833–47.10.1007/s11665-019-03942-2 ↗
13. Y. Li, J. Gao, N. Xu, P. Li, M. Gong, and W. Tong: J. Mater. Eng. Perform., 2019, vol. 28 (11), pp. 6904–11.10.1007/s11665-019-04401-8 ↗
14. C.K. Kim, S. Lee, and J.-Y. Jung: Metall. Mater. Trans. A, 2006, vol. 37 (3), pp. 633–43.10.1007/s11661-006-0035-9 ↗
15. X. Gao, Z. Jiang, D. Wei, S. Jiao, D. Chen, J. Xu, X. Zhang, and D. Gong: Mater. Des., 2014, vol. 63, pp. 650–57.10.1016/j.matdes.2014.06.067 ↗
16. Y. Li, M. Gong, K. Wang, P. Li, X. Yang, and W. Tong: Mater. Sci. Eng. A, 2018, 718, 260–66.10.1016/j.msea.2018.01.111 ↗
17. M. Stolbchenko, O. Grydin, and M. Schaper: Mater. Manuf. Processes, 2017, vol. 33(7), pp. 727-734.10.1080/10426914.2017.1317788 ↗
18. H. Hill, S. Weber, S. Siebert, S. Huth, and W. Theisen: Metall. Mater. Trans. A, 2010, vol. 41A (3), pp. 686-95.10.1007/s11661-009-0148-z ↗
19. P. Niederhofer, S. Huth, and W. Theisen: Wear, 2015, vol. 332-33, pp. 1059-69.10.1016/j.wear.2014.12.016 ↗
20. P.K. Farayibi, M. Blüm, and S. Weber: Mater. Sci. Eng. A, 2020, vol. 777, pp. 139053.10.1016/j.msea.2020.139053 ↗
21. T. Helander, and J. Ågren: Metall. Mater. Trans. A, 1997, vol. 28 (2), pp. 303–08.10.1007/s11661-997-0133-3 ↗
22. A. Borgenstam, L. Höglund, J. Ågren, and A. Engström (2000) J. Phase Equilib. 21(3), 269-80.10.1361/105497100770340057 ↗
23. [23] J. Garcia, G. Lindwall, O. Prat, and K. Frisk: Int. J. Refract. Met. Hard Mater., 2011, vol. 29 (2), pp. 256–59.10.1016/j.ijrmhm.2010.11.003 ↗
24. [24] G. Petzow: Metallographisches, Keramographisches, Plastographisches Ätzen, 6. Überarbeitete, Gerbrüder Borntraeger, Sttuttgart, Germany, 1994, pp. 239.
25. [25] L. Lutterotti, H. Pillière, C. Fontugne, P. Boullay, and D. Chateigner: J. Appl. Crystallogr., 2019, vol. 52 (3) pp. 587–98.10.1107/S160057671900342X ↗
26. S. Weber, W. Theisen, F. Castro, and A. Pyzalla: Mater. Sci. Eng. A, 2009, vol. 515 (1-2), pp. 175–82.10.1016/j.msea.2009.02.056 ↗
27. [27] K.G.F. Janssens, D. Raabe, E. Kozeschnik, M.A. Miodownik, and B. Nestler: Computational Materials Engineering: An Introduction to Microstructure Evolution, Elsevier Academic Press, 2007, pp. 151-74.
28. H. Mehrer: Diffusion in Solids: Fundamentals, Methods, Materials, Diffusion-Controlled Processes. Springer, Berlin 2007, pp. 161-89.10.1007/978-3-540-71488-0 ↗
29. Hassend F, Weber S (2019) Steel Res. Int. 91(5), 190048110.1002/srin.201900481 ↗
30. [40] G. E. Totten: Steel Heat Treatment – Metallurgy and Technologies, 2nd Edition, Taylor & Francis Group LLC, Boca Raton, FL 2006, p. 96.10.1201/NOF0849384530 ↗
31. A.P. Manfridini, G.C.D. de Godoy, and L. Santos: J. Mater. Res. Technol., 2017, 6(1), 65–7010.1016/j.jmrt.2016.07.001 ↗
32. J. Grosch: Microstructure and Properties of Gas Carburised Steels, Comprehensive Materials Processing, Reference Module in Materials Science and Materials Engineering, 2014, vol. 12, pp. 379-411.
33. P.K. Farayibi, M. Blüm, and S. Weber: HTM J. Heat Treat. Mater. 2020, 75(1), 48-62.10.3139/105.110400 ↗
34. M. Blüm, J. Conrads, S. Weber, and W. Theisen: HTM J. Heat Treat. Mater. 2014, vol. 69 (5), pp. 273-81.10.3139/105.110234 ↗
35. Krauss G (2016) Deformation and Fracture of Martensite before and after Tempering, Reference Module in Materials Science and Materials Engineering. Elsevier, Amsterdam pp. 1-5.
36. Ishida K (1995) J. Alloys Compd. 220, 126-31.10.1016/0925-8388(94)06002-9 ↗
37. P. Kulecki, E. Lichańska, A. Radziszewska, and M. Sułowski: Arch. Metall. Mater., 2016, vol. 61 (3), pp. 1613–22.10.1515/amm-2016-0263 ↗
38. ASM Handbook, Volume 12 - Fractography, ASM International, The Materials Information Company, 1992, pp. 34–140.
39. [38] R. Liang, Y. Ji, S. Wang, and S. Liu: Metals, 2016, vol. 6(8), pp. 1-8.10.3390/met6080186 ↗
40. [39] H. Berns, C. Broeckmann, and D. Weichert: Eng. Fract. Mech., 1997, vol. 58(4), pp. 311–25.10.1016/S0013-7944(97)00118-5 ↗