journal article·2020-08

Effects of Defect Development During Displacive Austenite Reversion on Strain Hardening and Formability

Menglei Jiang, Jiyun Kang, Charles Arthur Hirst, Cemal Cem Taşan

Publisher page

Abstract

Martensite that is mechanically induced from metastable austenite can be reversed to austenite upon annealing. The reversion transformation can be either diffusive or displacive, and the defect substructure development, in either case, has mechanical consequences. Here, to better understand the effects of microstructure development during displacive phase transformations, we focus on the influence of the initial plastic deformation on the austenite reversion (α′ → γ) in a transformation-induced plasticity-maraging steel. The phase transformation kinetics and the developing defect structure within the reversed γ phase are characterized by carrying out differential scanning calorimetry measurements, electron-backscattered diffraction, and electron channeling contrast imaging analyses. The resulting mechanical behavior is investigated by uniaxial and biaxial tension experiments. These investigations demonstrate that the defect development during sequential deformation-annealing treatments can help increase the overall strain hardening capacity of the alloy, which in turn increases the accumulative uniform elongation, and the formability. While the necking can be progressively delayed to higher strain levels following such treatments, the local fracture strain apparently cannot be, due to damage accumulation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. 1 K. Tomimura, S. Takaki, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431–7.10.2355/isijinternational.31.1431 ↗
2. 2 N. Nakada, T. Tsuchiyama, S. Takaki, and S. Hashizume: ISIJ Int., 2007, vol. 47, pp. 1527–32.10.2355/isijinternational.47.1527 ↗
3. 3 D. Raabe, S. Sandlöbes, J. Millán, D. Ponge, H. Assadi, M. Herbig, and P.-P.P. Choi: Acta Mater., 2013, vol. 61, pp. 6132–52.10.1016/j.actamat.2013.06.055 ↗
4. 4 R.D.K. Misra, S. Nayak, S.A. Mali, J.S. Shah, M.C. Somani, and L.P. Karjalainen: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2498–509.10.1007/s11661-009-9920-3 ↗
5. 5 M.M. Wang, C.C. Tasan, D. Ponge, and D. Raabe: Acta Mater., 2016, vol. 111, pp. 262–72.10.1016/j.actamat.2016.03.070 ↗
6. 6 J.T.T. Benzing, A. Kwiatkowski da Silva, L. Morsdorf, J. Bentley, D. Ponge, A. Dutta, J. Han, J.R.R. McBride, B. Van Leer, B. Gault, D. Raabe, and J.E.E. Wittig: Acta Mater., 2019, vol. 166, pp. 512–30.10.1016/j.actamat.2019.01.003 ↗
7. 7 B. Hu, H. Luo, F. Yang, and H. Dong: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1457–64.10.1016/j.jmst.2017.06.017 ↗
8. K. Bhattacharya: Microstructure of Martensite: Why It Forms and How It Gives Rise to the Shape-Memory Effect, vol. 41, Oxford University Press, Oxford; 2004.
9. 9 N. Nakada, T. Tsuchiyama, S. Takaki, D. Ponge, and D. Raabe: ISIJ Int., 2013, vol. 53, pp. 2275–7.10.2355/isijinternational.53.2275 ↗
10. 10 J. Han, S.J. Lee, J.G. Jung, and Y.K. Lee: Acta Mater., 2014, vol. 78, pp. 369–77.10.1016/j.actamat.2014.07.005 ↗
11. 11 N. Nakada: Mater. Lett., 2017, vol. 187, pp. 166–9.10.1016/j.matlet.2016.10.056 ↗
12. B.B. He, M.X. Huang: Metall. Mater. Trans. A 2016, vol. 47A, pp. 3346–53.
13. 13 B.B. He, M. Wang, and M.X. Huang: Metall. Mater. Trans. A, 2019, vol. 50, pp. 2971–7.
14. 14 J. Zhu, R. Ding, J. He, Z. Yang, C. Zhang, and H. Chen: Scr. Mater., 2017, vol. 136, pp. 6–10.10.1016/j.scriptamat.2017.03.038 ↗
15. 15 B. Hu, B. He, G. Cheng, H. Yen, M. Huang, and H. Luo: Acta Mater., 2019, vol. 174, pp. 131–41.10.1016/j.actamat.2019.05.043 ↗
16. 16 M.-M. Wang, C.C. Tasan, D. Ponge, A. Kostka, and D. Raabe: Acta Mater., 2014, vol. 79, pp. 268–81.10.1016/j.actamat.2014.07.020 ↗
17. 17 M. Koyama, Z. Zhang, M. Wang, D. Ponge, D. Raabe, K. Tsuzaki, H. Noguchi, and C.C. Tasan: Science, 2017, vol. 355, pp. 1055–7.10.1126/science.aal2766 ↗
18. 18 A. Alaei, H. Jafarian, and A.R. Eivani: Mater. Sci. Eng. A, 2016, vol. 676, pp. 342–50.10.1016/j.msea.2016.09.003 ↗
19. 19 S. Wei, M. Jiang, and C.C.C.C. Tasan: Metall. Mater. Trans. A, 2019, vol. 50, pp. 3985–91.10.1007/s11661-019-05344-4 ↗
20. 20 M. Wang, M. Jiang, and C.C. Tasan: Scr. Mater., 2020, vol. 179, pp. 75–9.10.1016/j.scriptamat.2019.12.032 ↗
21. 21 M.M. Wang, C.C. Tasan, D. Ponge, A.C. Dippel, and D. Raabe: Acta Mater., 2015, vol. 85, pp. 216–28.10.1016/j.actamat.2014.11.010 ↗
22. T. O’Haver: Univ. Maryl. Coll. Park. Coll. Park. MD, accessed Jan, 1997, vol. 14, p. 2018.
23. 23 C.C. Roth and D. Mohr: Int. J. Plast., 2016, vol. 79, pp. 328–54.10.1016/j.ijplas.2015.08.004 ↗
24. 24 C.G. van Essen, E.M. Schulson, and R.H. Donaghay: Nature, 1970, vol. 225, pp. 847–8.10.1038/225847a0 ↗
25. 25 C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–5.10.1038/nmeth.2089 ↗
26. 26 W.A. Johnsson and R.F. Mehl: Trans. Am. Inst. Min. Met. Eng., 1940, vol. 135, pp. 416–42.
27. 27 E.J. Mittemeijer: J. Mater. Sci., 1992, vol. 27, pp. 3977–87.10.1007/BF01105093 ↗
28. 28 Z. Guo, W. Sha, and D. Li: Mater. Sci. Eng. A, 2004, vol. 373, pp. 10–20.10.1016/j.msea.2004.01.040 ↗
29. M. Wang: PhD thesis.
30. 30 M.C. Somani, P. Juntunen, L.P. Karjalainen, R.D.K. Misra, and A. Kyröläinen: Metall. Mater. Trans. A, 2009, vol. 40, pp. 729–44.10.1007/s11661-008-9723-y ↗
31. V.N. Khachin: Martensitic Transformation, Elsevier, Amsterdam; 1978.
32. 32 P.M. Kelly, A. Jostsons, and R.G. Blake: Acta Metall. Mater., 1990, vol. 38, pp. 1075–81.10.1016/0956-7151(90)90180-O ↗
33. 33 N. Nakada, T. Tsuchiyama, S. Takaki, and N. Miyano: ISIJ Int., 2011, vol. 51, pp. 299–304.10.2355/isijinternational.51.299 ↗
34. 34 S. Zaefferer and N.N. Elhami: Acta Mater., 2014, vol. 75, pp. 20–50.10.1016/j.actamat.2014.04.018 ↗
35. 35 F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe: Acta Mater., 2010, vol. 58, pp. 1152–211.10.1016/j.actamat.2009.10.058 ↗
36. 36 X.D. Wang, B.X. Huang, Y.H. Rong, and L. Wang: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 300–5.10.1016/j.msea.2006.02.149 ↗
37. 37 M. Naghizadeh and H. Mirzadeh: Steel Res. Int., 2019, vol. 90, pp. 1–9.10.1002/srin.201900153 ↗
38. S. Chatterjee, H.-S.S. Wang, J.R. Yang, and H.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 641–44.10.1179/174328406X86128 ↗
39. 39 I. Gutierrez-Urrutia, S. Zaefferer, and D. Raabe: Jom, 2013, vol. 65, pp. 1229–36.10.1007/s11837-013-0678-0 ↗
40. 40 A. Weidner, S. Martin, V. Klemm, U. Martin, and H. Biermann: Scr. Mater., 2011, vol. 64, pp. 513–6.10.1016/j.scriptamat.2010.11.028 ↗
41. Z. Liu (2018) Int. J. Adv. Manuf. Technol., https://doi.org/10.1007/s00170-018-2470-3.10.1007/s00170-018-2470-3 ↗
42. K. Lange: McGraw-Hill B. Company, 1985, 1985, p. 1216.
43. P.F. Thomason: Pergamon Press, 1990, p. 219.
44. 44 E. De Moor, D.K. Matlock, J.G. Speera, and M.J. Merwin: Scr. Mater., 2011, vol. 64, pp. 185–8.10.1016/j.scriptamat.2010.09.040 ↗
45. R.W. Balluffi, S.M. Allen, and W.C. Carter: Kinetics of Materials, John Wiley & Sons, 2005.10.1002/0471749311 ↗
46. 46 J. Han and Y.-K. Lee: Acta Mater., 2014, vol. 67, pp. 354–61.10.1016/j.actamat.2013.12.038 ↗
47. 47 M.I. Latypov, S. Shin, B.C. De Cooman, and H.S. Kim: Acta Mater., 2016, vol. 108, pp. 219–28.10.1016/j.actamat.2016.02.001 ↗
48. 48 K.E. Easterling and A.R. Thölén: Acta Metall., 1976, vol. 24, pp. 333–41.10.1016/0001-6160(76)90008-0 ↗
49. 49 H.C. Fieldler, B.L. Avergach, and M. Cohen: Trans. ASM, 1995, vol. 47, pp. 267–90.
50. S.J. Lee, S.J. Lee, and B.C. De Cooman: Mater. Sci. Technol. Conf. Exhib. 2011, MS T’11, 2011, vol. 1, pp. 545–51.
51. 51 T.J. Koppenaal and E. Gold: Metall. Trans., 1972, vol. 3, pp. 2965–72.10.1007/BF02652868 ↗
52. 52 K. Bhattacharya, S. Conti, G. Zanzotto, and J. Zimmer: Nature, 2004, vol. 428, pp. 55–9.10.1038/nature02378 ↗
53. 53 F. Forouzan, A. Najafizadeh, A. Kermanpur, A. Hedayati, and R. Surkialiabad: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7334–9.10.1016/j.msea.2010.08.002 ↗
54. 54 H. Kessler and W. Pitsch: Acta Metall., 1965, vol. 13, pp. 871–4.10.1016/0001-6160(65)90153-7 ↗