Segmentation and Alignment of Nd2Fe14B Platelets in Nd-Cu Eutectic Alloys Using the Electromagnetic Vibration Technique
Source abstract
Abstract
An anisotropic Nd2Fe14B magnet has been of particular significance in engineering, which is usually produced via powder metallurgy. In this study, we report on the production of an anisotropic magnet by solidifying two alloys, i.e., Nd70Cu30-30, 50 wt pct Nd2Fe14B from the semisolid state using the electromagnetic vibration (EMV) technique. The solidification structures are observed, and the crystalline orientations of the Nd2Fe14B intermetallic compounds are revealed by electron backscatter diffraction (EBSD) patterns. It is found that the two-step EMV processing is effective in segmenting the developed Nd2Fe14B compound into fine laths and then aligning these platelets with their easy magnetization directions parallel to that of the static magnetic field. The magnetic properties measured by a vibrating sample magnetometer (VSM) indicate that the specimen with the well-aligned Nd2Fe14B platelets exhibits a strong anisotropy in magnetism. The segmentation and alignment mechanisms are discussed when considering the EMV imposition parameters, the difference of electrical resistivity between the Nd2Fe14B compound and the eutectic melt, and the role of the static magnetic field in the present processing condition. The two-step EMV processing technique is promising and expected to provide a new alternative for the simple production of anisotropic Nd2Fe14B magnets via solidification only instead of conventional powder metallurgy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. J.J. Croat, J.F. Herbst, R.W. Lee, and F.E. Pinkerton: J. Appl. Phys., 1984, vol. 55, pp. 2078–2082.10.1063/1.333571 ↗
2. M. Sagawa, S. Fujimura, N. Togawa, H. Yamamoto, and Y. Matsuura (1984) J. Appl. Phys., 55: 2083–208710.1063/1.333572 ↗
3. R.W. Lee: Appl. Phys. Lett., 1985, vol. 46, pp. 790–791.10.1063/1.95884 ↗
4. R.K. Mishra: J. Appl. Phys., 1987, vol. 62, pp. 967–971.10.1063/1.339709 ↗
5. R. Lee, E. Brewer, and N. Schaffel: IEEE Trans. Magn., 1985, vol. 21, pp. 1958–1963.10.1109/TMAG.1985.1064031 ↗
6. J.F. Herbst and J.J. Croat: J. Magn. Magn. Mater., 1991, vol. 100, pp. 57–78.10.1016/0304-8853(91)90812-O ↗
7. J.F. Herbst, J.J. Croat, F.E. Pinkerton, and W.B. Yelon: Phys. Rev. B, 1984, vol. 29, pp. 4176–4178.10.1103/PhysRevB.29.4176 ↗
8. J.F. Herbst: Rev. Mod. Phys., 1991, vol. 63, pp. 819–898.10.1103/RevModPhys.63.819 ↗
9. M.J. Aziz and W.J. Boettinger: Acta Metall. Mater., 1994, vol. 42, pp. 527-–537.10.1016/0956-7151(94)90507-X ↗
10. M. Li and K. Kuribayashi: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2999–3008.10.1007/s11661-003-0199-5 ↗
11. K.-D. Durst and H. Kronmuller: J. Magn. Magn. Mater., 1986, vol. 59, pp. 86–94.10.1016/0304-8853(86)90014-4 ↗
12. R.K. Mishara and R.W. Lee: Appl. Phys. Lett., 1986, vol. 48, pp. 733–735.10.1063/1.96704 ↗
13. H. Sepehri-Amin, T. Ohkubo, S. Nagashima, M. Yano, T. Shoji, A. Kato, T. Schrefl, and K. Hono: Acta Mater., 2013, vol. 61, pp. 6622–6634.10.1016/j.actamat.2013.07.049 ↗
14. J. Liu, H. Sepehri-Amin, T. Ohkubo, K. Hioki, A. Hattori, and K. Hono: J. Appl. Phys., 2014, vol. 115, 17A744.
15. S. Sawatzki, I. Dirba, L. Schultz, and O. Gutfleish: J. Appl. Phys., 2013, vol. 114, 133902.10.1063/1.4822026 ↗
16. M. Sagawa, S. Hirosawa, K. Tokuhara, H, Yamamoto, S. Fujimura, Y. Tsubokawa, and R. Shimizu: J. Appl. Phys., 1987, vol, 61, pp. 3559–3561.10.1063/1.338725 ↗
17. H.S. Chen, W.Q. Xu, Z.X. Ye, Y. Yao, J.T. Qu, F. Yun, et al: Crystal Growth Des., 2017, vol. 17, pp. 6550–6558.10.1021/acs.cgd.7b01213 ↗
18. K. Hono, T. Ohkubo, and H. Sepehri-Amin: J. Japan Inst. Metals, 2012, vol. 76, pp. 2–11.10.2320/jinstmet.76.2 ↗
19. C. Vives: Metall. Trans. B, 1989, vol. 20B, pp. 623–629.10.1007/BF02655919 ↗
20. C. Vives: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 445–455.10.1007/BF02914909 ↗
21. Y. Mizutani, K. Miwa, T. Tamura, Y. Nakai, and Y. Otsuka: Mater. Trans., 2006, vol. 47, pp. 1793–1797.10.2320/matertrans.47.1793 ↗
22. Y. Mizutani, T. Tamura, and K. Miwa: Mater. Trans., 2007, vol. 48, pp. 538–543.10.2320/matertrans.48.538 ↗
23. A. Radjai and K. Miwa: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 755–762.10.1007/s11661-000-0017-2 ↗
24. M. Li, T. Tamura, and T. K. Miwa: Acta Mater., 2007, vol. 55, pp. 4635–4643.10.1016/j.actamat.2007.04.035 ↗
25. T. Takagi, K. Iwai, and S. Asai: ISIJ Inter., 2003, vol. 43, pp. 842–848.10.2355/isijinternational.43.842 ↗
26. K. Sugiura and K. Iwai: ISIJ Inter., 2004, vol. 44, pp. 1410–1415.10.2355/isijinternational.44.1410 ↗
27. S. Guo, Q. Le, Z. Zhao, Z. Wang, and J. Cui: Mater. Sci. Eng. A, 2005, vol. 404A, pp. 323–329.10.1016/j.msea.2005.05.070 ↗
28. X. Li, Z. Ren, and Y. Fautrelle: J. Mater. Proc. Techno., 2008, vol. 195, pp. 125–134.10.1016/j.jmatprotec.2007.04.128 ↗
29. J. Du and K. Iwai: Mater. Trans., 2009, vol. 50, pp. 622–630.10.2320/matertrans.MRA2008366 ↗
30. J. Du and K. Iwai: Mater. Trans., 2009, vol. 50, pp. 562–569.10.2320/matertrans.MRA2008235 ↗
31. M. Li, T. Tamura, N. Omura, Y. Murakami, S. Tada, K. Miwa, and K. Takahashi: J. Alloys Compd., 2014, vol. 610, pp. 606–613.10.1016/j.jallcom.2014.05.044 ↗
32. T. Tamura, M. Li, and K. Takahashi: Proceedings of the 72nd world foundry congress, Nagoya 2016, Japan, p. 9.
33. Y. Zhong, H. Wang, Y. Wang, J. Wang, Z. Shen, T. Zheng, D. Zhu, W. Ren, Z. Lei, Z. Ren, and J. Huang: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 3377–3388.10.1007/s11661-017-4118-6 ↗
34. T. Tamura, K. Amiya, R.S. Rachmat, Y. Mizutani, and K. Miwa: Nature Mater., 2005, vol. 4, pp. 289–292.10.1038/nmat1341 ↗
35. M. Li and T. Tamura: Sci. Rep., 2019, vol. 9, 5733.
36. W.F. Li, T. Ohkubo, and K. Hono: Acta Mater., 2009, vol. 57, pp. 1337–1346.10.1016/j.actamat.2008.11.019 ↗
37. J. Liu, H. Sepehri-Amin, T. Ohkubo, K. Hioki, A. Hattori, T. Schrefl, and K. Hono: Acta Mater., 2013, vol. 61, pp. 5387–5399.10.1016/j.actamat.2013.05.027 ↗
38. H. Sepehri-Amin, T. Ohkubo, T. Shima. And K. Hono: Acta Mater., 2012, vol. 60, pp. 819–830.10.1016/j.actamat.2011.10.043 ↗
39. J. Liu, H. Sepehri-Amin, T. Ohkubo, K. Hioki, A. Hattori, T. Schrefld, and K. Hono: Acta Mater., 2015, vol. 82, pp. 336–343.10.1016/j.actamat.2014.09.021 ↗
40. J. Wang: Calphad, 1992, vol. 16, pp. 87–92.10.1016/0364-5916(92)90042-V ↗
41. M. Li, T. Tamura, N. Naoki, and K. Miwa: J. Alloys Compd., 2010, vol. 494, pp. 116–122.10.1016/j.jallcom.2010.01.025 ↗
42. M. Li, T. Tamura, and K. Miwa: J. Mater. Res., 2009, vol. 24, pp. 145–155.10.1557/JMR.2009.0007 ↗
43. W. Fernengel, A. Lehnert, M. Katter, W. Rodewald, and B. Wall: J. Magn. Magn. Mater., 1996, vols. 157–158, pp. 19–20.10.1016/0304-8853(95)01066-1 ↗
44. T. Kawai, B.M. Ma, S.G. Sankar, and W.E. Wallace: J. Appl. Phys., 1990, vol. 67, pp. 4610–4612.10.1063/1.344828 ↗
45. E. Girt, K. M. Krishnan, G. Thomas, E. Girt, and Z. Altounian: J. Magn. Magn. Mater., 2001, vol. 231, pp. 219–230.10.1016/S0304-8853(01)00031-2 ↗
46. G.P. Zhao and X.L. Wang: Phys. Rev. B, 2006, vol. 74, 012409.
47. D.C. Jiles: Acta Mater., 2003, vol. 51, pp. 5907–5939.10.1016/j.actamat.2003.08.011 ↗
48. M.J. Kramer, L.H. Lewis, L.M. Fabietti, Y. Tang, W. Miller, K.W. Dennis, and R.W. McCallum: J. Magn. Magn. Mater., 2002, vol. 241, pp. 144–155.10.1016/S0304-8853(01)00955-6 ↗
49. B. Giordanengo, N. Benazzi, J. Vinckel, J.G. Gasser, and L. Roubi: J. Non-Cryst. Solids, 1999, vols. 250–252, pp. 377–383.10.1016/S0022-3093(99)00268-9 ↗
50. M. Li, T. Tamura, N. Omura, and K. Miwa: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 1192–1198.10.1016/S1003-6326(09)60277-6 ↗
51. M. Li, T. Tamura, N. Omura, Y. Murakami, and S. Tada: IOP Conf. Ser. Mater. Sci. Eng., 2016, vol. 117, 012048.
52. M. Li, T. Tamura, N. Omura, and K. Miwa: Mater. Trans., 2009, vol. 50, pp. 2015–2020.10.2320/matertrans.M2009056 ↗
53. J. Stankiewicz and J. Bartolome: Phys. Rev. B, 1999, vol. 59, pp. 1152–1156.10.1103/PhysRevB.59.1152 ↗
54. K.T. Wu, Y.D. Yao, and I. Klik: Appl. Surf. Sci., 1997, vols. 113–114, pp. 174–177.
55. J.K. Alstad, R.V. Colvin, S. Legvold, and F.H. Spedding: Phys. Rev., 1961, vol. 121, pp. 1637–1639.10.1103/PhysRev.121.1637 ↗
56. J.R. Davis, in ASM specialty handbook copper and copper alloys, The Materials International Society, Materials Park OH, 1993, pp. 448–49.
57. A.E. Mikelson and Ya. Kh. Karklin: J. Cryst. Growth, 1981, vol. 52, pp. 524–529.10.1016/0022-0248(81)90333-X ↗
58. T. Sugiyama, M. Tahashi, K. Sassa, and S. Asai: ISIJ Inter., 2003, vol. 43, pp. 855–861.10.2355/isijinternational.43.855 ↗
59. S. Asai: Model. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. R1–R12.10.1088/0965-0393/12/2/R01 ↗
60. H. Kato, T. Miyazaki, M. Sagawa, and K. Koyama: Appl. Phys. Lett., 2004, vol. 84, pp. 4230–4232.10.1063/1.1756193 ↗
61. P. Courtois, R. Perrier de la Bathie, and R. Tournier: J. Magn. Magn. Mater., 1996, vol. 153, pp. 224–230.10.1016/0304-8853(95)00495-5 ↗
62. P. de Rango, M. Lees, P. Lejay, A. Sulpice, R. Tournier, M. Ingold, P. Germi, and M. Pernet: Nature, 1991, vol. 349, pp. 770–772.10.1038/349770a0 ↗
63. B.A. Legrand, D. Chateigner, R. Perrier de la Bathie, and R. Tournier: J. Magn. Magn. Mater., 1997, vol. 173, pp. 20–28.10.1016/S0304-8853(97)00149-2 ↗
64. M. Li, T. Tamura, and K. Miwa: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1422–1435.10.1007/s11661-009-9831-3 ↗
65. S. Hirosawa, Y. Matsuura, H. Yamamoto, S. Fujimura, M. Sagawa, and H. Yamauchi: J. Appl. Phys., 1986, vol. 59, pp. 873-879.10.1063/1.336611 ↗