journal article·2018-10

Constitutive Modeling and Activation Energy Maps for a Continuously Cast Hyperperitectic Steel

X. Gao, H. X. Li, L. Han, B. Santillana, D. Ruvalcaba, L. Z. Zhuang

Publisher page

Abstract

An appropriate experimental scheme and an accurate constitutive model are the two key factors that determine the success or failure of the constitutive equations used to simulate hot deformation behavior during the continuous casting process. In this study, according to the characteristics of the thin-slab continuous casting process, the experimental scheme on hot tensile tests is designed and validated by the analysis of fracture surfaces. Isothermal hot tensile tests were performed on a Gleeble 1500 thermomechanical simulator at four different temperatures (1173 K, 1273 K, 1373 K, and 1473 K) and four different strain rates (10−3, 10−2, 10−1, and 1 s−1). Based on the flow stress obtained from the tensile tests, the Arrhenius-type constitutive equation was established. It is shown that the simulation results are in good agreement with the experimental data. To further understand the constitutive behavior, activation energy maps were also developed in this study. Through a brief analysis of the activation energy map, directions for future work were surmised.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. M. C. M. Cornelissen, J. A. Kromhout, A. A. Kamperman, M. Kick and F. Mensonides, Ironmaking & Steelmaking 2006, vol. 33, pp. 362-366.10.1179/174328106X149905 ↗
2. Kazuo Okamura and Hisakazu Kawashima, ISIJ International 1989, vol. 29, pp. 666-672.10.2355/isijinternational.29.666 ↗
3. J. Sengupta, C. Ojeda and B. G. Thomas, International Journal of Cast Metals Research 2009, vol. 22, pp. 8-14.10.1179/136404609X368037 ↗
4. D. Samantaray, S. Mandal and A. K. Bhaduri, Materials & Design 2010, vol. 31, pp. 981-984.10.1016/j.matdes.2009.08.012 ↗
5. Patrick F. Kozlowski, Brian G. Thomas, Jean A. Azzi and Hao Wang, Metallurgical Transactions A 1992, vol. 23, p. 903.10.1007/BF02675567 ↗
6. M. Bellet and B.G. Thomas: in Materials Processing Handbook, J.F. Shackelford and J.R. Groza, CRC Press/Taylor and Francis, ISBN 9780849332166, 2007.
7. Fei Yin, Lin Hua, Huajie Mao and Xinghui Han, Materials & Design 2013, vol. 43, pp. 393-401.10.1016/j.matdes.2012.07.009 ↗
8. Y. C. Lin, M.-S. Chen and J. Zhong, Computational Materials Science 2008, vol. 42, pp. 470-477.10.1016/j.commatsci.2007.08.011 ↗
9. Yan-Hong Xiao and Cheng Guo, Materials Science and Engineering: A 2011, vol. 528, pp. 5081-5087.10.1016/j.msea.2011.03.050 ↗
10. S. Mandal, V. Rakesh, P. V. Sivaprasad, S. Venugopal and K. V. Kasiviswanathan, Materials Science and Engineering: A 2009, vol. 500, pp. 114-121.10.1016/j.msea.2008.09.019 ↗
11. Hong-Ying Li, Yang-Hua Li, Dong-Dong Wei, Jiao-Jiao Liu and Xiao-Feng Wang, Materials Science and Engineering: A 2011, vol. 530, pp. 367-372.10.1016/j.msea.2011.09.097 ↗
12. K. P. Rao, Y. K. D. V. Prasad and E. B. Hawbolt, Journal of Materials Processing Technology 1996, vol. 56, pp. 897-907.10.1016/0924-0136(95)01902-2 ↗
13. S. T. Wu, W. Feng and X. Hu, Ironmaking & Steelmaking 2015, vol. 42, pp. 481-488.10.1179/1743281214Y.0000000248 ↗
14. An He, Lin Chen, Sheng Hu, Can Wang and Lexiao Huangfu, Materials & Design 2013, vol. 46, pp. 54-60.10.1016/j.matdes.2012.09.049 ↗
15. J. M. Cabrera, A. Al Omar, J. M. Prado and J. J. Jonas, Metallurgical and Materials Transactions A 1997, vol. 28, pp. 2233-2244.10.1007/s11661-997-0181-8 ↗
16. Hamed Mirzadeh, Abbas Najafizadeh and Mohammad Moazeny, Metallurgical and Materials Transactions A 2009, vol. 40, pp. 2950-2958.10.1007/s11661-009-0029-5 ↗
17. Dipti Samantaray, Sumantra Mandal and A. K. Bhaduri, Computational Materials Science 2009, vol. 47, pp. 568-576.10.1016/j.commatsci.2009.09.025 ↗
18. Y. C. Lin and Xiao-Min Chen, Materials & Design 2011, vol. 32, pp. 1733-1759.10.1016/j.matdes.2010.11.048 ↗
19. Varvara Kouznetsova, Marc GD Geers and WA Marcel Brekelmans, International Journal for Numerical Methods in Engineering 2002, vol. 54, pp. 1235-1260.10.1002/nme.541 ↗
20. Su Hao, Wing Kam Liu, Brian Moran, Franck Vernerey and Gregory B. Olson, Computer Methods in Applied Mechanics and Engineering 2004, vol. 193, pp. 1865-1908.10.1016/j.cma.2003.12.026 ↗
21. S Pommier, P Lopez-Crespo and PY Decreuse, Fatigue & Fracture of Engineering Materials & Structures 2009, vol. 32, pp. 899-915.10.1111/j.1460-2695.2009.01392.x ↗
22. E.A. de Souza Neto and R.A. Feijóo: LNCC Research & Development Report, pp. 1–53.
23. Hong-Ying Li, Dong-Dong Wei, Ji-Dong Hu, Yang-Hua Li and Shao-Lin Chen, Computational Materials Science 2012, vol. 53, pp. 425-430.10.1016/j.commatsci.2011.08.031 ↗
24. Xiaoming He, Zhongqi Yu, Guiming Liu, Wenge Wang and Xinmin Lai, Materials & Design 2009, vol. 30, pp. 166-169.10.1016/j.matdes.2008.04.046 ↗
25. L. X. Wang, G. Fang, M. A. Leeflang, J. Duszczyk and J. Zhou, Journal of Alloys and Compounds 2015, vol. 622, pp. 121-129.10.1016/j.jallcom.2014.10.006 ↗
26. Guobing Wei, Xiaodong Peng, Amir Hadadzadeh, Yahya Mahmoodkhani, Weidong Xie, Yan Yang and Mary A. Wells, Mechanics of Materials 2015, vol. 89, pp. 241-253.10.1016/j.mechmat.2015.05.006 ↗
27. Yan-Hong Xiao, Cheng Guo and Xiao-Yan Guo, Materials Science and Engineering: A 2011, vol. 528, pp. 6510-6518.10.1016/j.msea.2011.04.090 ↗
28. A. A. Khamei and K. Dehghani, Journal of Alloys and Compounds 2010, vol. 490, pp. 377-381.10.1016/j.jallcom.2009.09.187 ↗
29. V. Ludlow, A. Normanton, A. Anderson, M. Thiele, J. Ciriza, J. Laraudogoitia and W. van der Knoop, Ironmaking & Steelmaking 2005, vol. 32, pp. 68-74.10.1179/174328105X23978 ↗
30. Young Mok Won, Tae-Jung Yeo, Dong Jin Seol and Kyu Hwan Oh, Metallurgical and Materials Transactions B 2000, vol. 31, pp. 779-794.10.1007/s11663-000-0115-y ↗
31. Yasuhiro Maehara, Ken Nakai, Kunio Yasumoto and Tateshi Mishima, Transactions of the Iron and Steel Institute of Japan 1988, vol. 28, pp. 1021-1027.10.2355/isijinternational1966.28.1021 ↗
32. J.F. Thomas Jr.: in AGARD Process Modeling Appl. to Metal Forming and Thermomechanical Processes (SEE N85-15086 06-31), 1984, pp. 1–18.
33. Marcin Hojny and Mirosław Głowacki, Procedia Engineering 2011, vol. 10, pp. 2353-2362.10.1016/j.proeng.2011.04.388 ↗
34. Thierry Revaux, Pascal Deprez, Jean-Paul Bricout, J. Oudin, eacute, ocirc and me, ISIJ International 1994, vol. 34, pp. 528-535.10.2355/isijinternational.34.528 ↗
35. Dong Jin Seol, Young Mok Won, Kyu Hwan Oh, Yong Chang Shin and Chang Hee Yim, ISIJ International 2000, vol. 40, pp. 356-363.10.2355/isijinternational.40.356 ↗
36. Riqiang Liang and Akhtar S Khan, International Journal of Plasticity 1999, vol. 15, pp. 963-980.10.1016/S0749-6419(99)00021-2 ↗
37. J. J. Jonas, C. M. Sellars and W. J. McG Tegart, Metallurgical Reviews 1969, vol. 14, pp. 1-24.10.1179/095066069790138056 ↗
38. C Michael Sellars and WJ McTegart, Acta Metallurgica 1966, vol. 14, pp. 1136-1138.10.1016/0001-6160(66)90207-0 ↗
39. Hamed Mirzadeh, Mechanics of Materials 2015, vol. 85, pp. 66-79.10.1016/j.mechmat.2015.02.014 ↗
40. Y. C. Lin and Ge Liu, Computational Materials Science 2010, vol. 48, pp. 54-58.10.1016/j.commatsci.2009.06.026 ↗
41. HJ McQueen and ND Ryan, Materials Science and Engineering: A 2002, vol. 322, pp. 43-63.10.1016/S0921-5093(01)01117-0 ↗
42. Cangji Shi, Weimin Mao and X. Grant Chen, Materials Science and Engineering: A 2013, vol. 571, pp. 83-91.10.1016/j.msea.2013.01.080 ↗
43. S. Ramanathan, R. Karthikeyan and G. Ganasen, Materials Science and Engineering: A 2006, vol. 441, pp. 321-325.10.1016/j.msea.2006.08.044 ↗
44. Y. V. R. K. Prasad and T. Seshacharyulu, International Materials Reviews 1998, vol. 43, pp. 243-258.10.1179/imr.1998.43.6.243 ↗
45. P. Manohar and M. Ferry: in The Deformation and Processing of Structural Materials, Woodhead Publishing, Cambridge, 2005, pp. 76–125.10.1533/9781845690786.76 ↗