journal article·2018-08

Multi-scale Examination of the Microstructure Evolution of AZ31 During Multi-pass Cross-Rolling

S. Liang, X. Wang, H. S. Zurob, N. Bassim

Publisher page

Abstract

Sheet specimens of alloy AZ31 were cross-rolled to equivalent strains of 0.05, 0.10, 0.20, 0.30, 0.40, 0.56, and 0.77. The microstructure evolution was examined using a combination of optical metallography, electron backscattered diffraction (EBSD), transmission electron microscopy (TEM), and X-ray diffraction. The results revealed significant activity of twinning and basal slip. The twins were mainly of the contraction and double-twin (contraction-extension) types. In addition to the micron-scale (1 to 5 μm) twins observed on EBSD patterns, nano-scale twins were observed by TEM. The nano twins had a width of less than 0.20 μm and existed either as individual/isolated twins or as twin-bundles that are several microns thick. The number of nano twin-bundles increased with increasing strain. Twinning appears to play a key role in strain localization leading to the formation of shear bands. The repeated strain-path changes during cross-rolling delayed the onset of shear banding compared to specimens in which the rolling direction was unchanged.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. C.S. Roberts: Magnesium and Its Alloys, John Wiley & Sons, Inc., New York, 1960, pp. 81-107.
2. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama and K. Higashi: Acta Mater., 2003, vol. 51, pp. 2055-2065.10.1016/S1359-6454(03)00005-3 ↗
3. J.J. Jonas, S. Mu, T. Al-Samman, G. Gottstein, L. Jiang, and Ė. Martin: Acta Mater., 2011, vol. 59, pp. 2046-2056.10.1016/j.actamat.2010.12.005 ↗
4. P. Yang, Y. Yu, L. Chen and W. Mao: Scripta Mater., 2004, vol. 50, pp. 1163-1168.10.1016/j.scriptamat.2004.01.013 ↗
5. M.H. Yoo: Metall. Trans. A, 1981, vol. 12A, pp. 409-418.10.1007/BF02648537 ↗
6. Z. Keshavarz and M.R. Barnett: Scripta Mater., 2006, vol. 55, pp. 915-918.10.1016/j.scriptamat.2006.07.036 ↗
7. M.R. Barnett: Mater. Sci. Eng. A, 2007, vol. 464, pp.1-7.10.1016/j.msea.2006.12.037 ↗
8. E.W. Kelley and W.F. Hosford, Jr: Trans. Metall. Soc. AIME, 1968, vol. 242, pp. 5-13.
9. B.C. Wonsiewicz and W.A. Backofen: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1422-1433.
10. W.H. Hartt and R.E. Reed-Hill: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1511-1517.
11. P. Okrutny: Modelling of Recovery and Recrystallization in Magnesium Alloys, McMaster University, Hamilton, 2010.
12. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A, 2008, vol. 488, pp. 406-414.10.1016/j.msea.2007.11.056 ↗
13. M.D. Nave and M.R. Barnett: Scripta Mater., 2004, vol. 51, pp. 881-885.10.1016/j.scriptamat.2004.07.002 ↗
14. S. Sandlöbes, S. Zaefferer, I. Schestakow, S. Yi and R. Gonzalez-Martinez: Acta Mater., 2011, vol. 59, pp. 429-439.10.1016/j.actamat.2010.08.031 ↗
15. S.H. Park, S.-G. Hong, J.H. Lee and C.S. Lee: Mater. Sci. Eng. A, 2012, vol. 532, pp. 401-406.10.1016/j.msea.2011.11.003 ↗
16. Y. Xin, J. Jiang, A. Chapuis, M. Wang and Q. Liu: Mater. Sci. Eng. A, 2012, vol. 532, pp. 50-57.10.1016/j.msea.2011.10.061 ↗
17. J. Scott, M. Miles, D. Fullwood, B. Adams, A. Khosravani and R.K. Mishra: Metall. Mater. Trans. A, 2012, vol. 44, pp. 512-516.
18. Y.B. Chun and C.H.J. Davies: Mater. Sci. Eng. A, 2012, vol. 556, pp. 253-259.10.1016/j.msea.2012.06.083 ↗
19. S.M. Fatemi-Varzaneh, A. Zarei-Hanzaki and J.M. Cabrera: J. Alloys Compd., 2011, vol. 509, pp. 3806-3810.10.1016/j.jallcom.2011.01.019 ↗
20. M.R. Barnett, M.D. Nave and C.J. Bettles: Mater. Sci. Eng. A, 2004, vol. 386, pp. 205-211.10.1016/S0921-5093(04)00942-6 ↗
21. T. Al-Samman and G. Gottstein: Scripta Mater., 2008, vol. 59, pp. 760-763.10.1016/j.scriptamat.2008.06.023 ↗
22. X. Li, T. Al-Samman and G. Gottstein: Mater. Des., 2011, vol. 32, pp. 4385-4393.10.1016/j.matdes.2011.03.079 ↗
23. Y. Chino, J.-S. Lee, K. Sassa, A. Kamiya and M. Mabuchi: Mater. Lett., 2006, vol. 60, pp. 173-176.10.1016/j.matlet.2005.08.012 ↗
24. S.L. Couling, J.F. Pashak and L. Sturkey: Transactions of American Society for metals, 1959, vol. 51, pp. 94-107.
25. G.S. Duan, B.L. Wu, X.H. Du, G. Zhao, Y.D. Zhang, X. Zhao, L. Zuo and C. Esling: Mater. Sci. Eng. A, 2015, vol. 620, pp. 120-128.10.1016/j.msea.2014.10.001 ↗
26. MTEX software package. http://mtex-toolbox.github.io/.
27. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, 1996, p. 34.
28. M. Hatherly and A.S. Malin: Scripta Mater., 1984, vol. 18, pp. 449-454.10.1016/0036-9748(84)90419-8 ↗
29. M. Knezevic, A. Levinson, R. Harris, R.K. Mishra, R.D. Doherty and S.R. Kalidindi: Acta Mater., 2010, vol. 58, pp. 6230-6242.10.1016/j.actamat.2010.07.041 ↗
30. P.G. Partridge: Metall. Rev., 1967, vol. 12, pp. 169-194 .10.1179/imr.1967.12.1.169 ↗
31. S. Choi, E. Shin and B. Seong: Acta Mater., 2007, vol. 55, pp. 4181-4192.10.1016/j.actamat.2007.03.015 ↗
32. S. Liang, H. Sun, Z. Liu and E. Wang: J. Alloys Compd., 2009, vol. 472, pp. 127-132.10.1016/j.jallcom.2008.04.093 ↗
33. M. Lentz, M. Risse, N. Schaefer, W. Reimers and I.J. Beyerlein: Nat. Commun., 2016, vol. 7, pp. 1-7.10.1038/ncomms11068 ↗