journal article·2017-06Open access

Non-isothermal Characterization of the Precipitation Hardening of a Cu-11Ni-19Zn-1Sn Alloy

E. Donoso, M. J. Diánez, J. M. Criado, R. Espinoza, E. Mosquera

Abstract

The precipitation hardening of a Cu-11Ni-19Zn-1Sn alloy has been studied by means of Differential Scanning Calorimetry (DSC), High-Resolution Transmission Electron Microscopy (HRTEM), and hardness measurements. The calorimetric curves, in the range of temperatures analyzed, show the presence of one exothermic reaction followed by an endothermic one. The exothermic DSC peak is due to the segregation of Cu2NiZn precipitates and it is associated to a noticeable improvement of the mechanical properties of the alloy. The endothermic effect is associated to the dissolution of the Cu2NiZn precipitates into the copper matrix for restoring the starting Cu-11Ni-19Zn-1Sn homogeneous solid solution. The reaction mechanisms of these processes have been proposed from the kinetic analysis of the exothermic and endothermic DSC signals. The results obtained point out that tin plays a decisive role on the precipitation hardening of the alloy, because age hardening is not observed in the case of a Cu-Ni-Zn ternary alloy of similar composition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical and Alloy Processes · Advanced materials and composites · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. R.H. Palma, A. Sepúlveda, R. Espinoza, A. Zúñiga, M.J. Diánez, J.M. Criado and M.J. Sayagués: Mater. Sci. Eng. A, 2004, vol. 384, pp. 262-26910.1016/S0921-5093(04)00862-7 ↗
2. J.R. Groza and J.C. Gibeling: Mater. Sci. Eng. A, 1993, vol. 171, pp. 115-12510.1016/0921-5093(93)90398-X ↗
3. N. Lebrun and P. Perrot: Non-ferreous metal systems,Part 3, Landolt-Börnstein-Group IV Physical Chemistry, vol. 11C3, Springer, Stuggart, Germany, 2007, pp. 338-354
4. S. Nagarjuna, M. Srinivas and K.K. Sharma: Acta Mater., 2000, vol. 48, pp. 1807-181310.1016/S1359-6454(99)00464-4 ↗
5. S. Nagarjuna, B. Gopalakrishna and M. Srinivas: Mater. Sci. Eng. A, 2006, vol. 429, pp. 169-17210.1016/j.msea.2006.05.096 ↗
6. X.Z. Zhou, Y.C. Su and J.M. Sun: J. Mater. Sci., 2010, vol. 45, pp.3080-308710.1007/s10853-010-4315-9 ↗
7. X.Z. Zhou and Y.C. Su: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5153-515610.1016/j.msea.2010.04.089 ↗
8. X.P. Ding, H.Cui, J.X. Zhang, H.X. Li, M.X. Guo and Z. L. Min: Mater. Des., 2015, vol.65, pp. 1229-123510.1016/j.matdes.2014.09.086 ↗
9. X.Y. Liu, Q.L. Pan, S.X. Zhang, S.X. Liang, L.Y. Zheng, F. Gao and H.L. Xie: Mater. Des., 2014, vol. 58, pp. 247-25110.1016/j.matdes.2014.01.048 ↗
10. C. Li, D.G. Lee, X.J. Mi, W.J. Ye, S.X, Hui and Y.T, Lee: Metall. Mater.Trans. A, 2016, vol. 47A, pp.2454-246110.1007/s11661-016-3386-x ↗
11. G. Miyamoto, S. Suetsugu, K. Shimbo and T. Furuhara: Metall. Mater.Trans. A, 2015, vol. 46A, pp. 5011-502010.1007/s11661-015-3133-8 ↗
12. J.S. Pérez, R.R. Ambriz, F.F.C. López and D.J. Vigueras: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3412–2210.1007/s11661-016-3483-x ↗
13. S. Sackl, M. Zuber, H. Clemens and S. Priming: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3694-370210.1007/s11661-016-3534-3 ↗
14. M.J. Diánez, E. Donoso, J.M. Criado, M.J. Sayagués, G. Diaz and L. Olivares: Mater.Des., 2016, vol.92, pp. 184-18810.1016/j.matdes.2015.12.030 ↗
15. T.D. Shen and C.C. Koch: Acta. Mater., 1996, vol. 44, pp. 753-76110.1016/1359-6454(95)00178-6 ↗
16. E. Donoso, R. Espinoza, M.J. Diánez and J.M. Criado: Mater. Sci. Eng. A, 2012, vol. 556A, pp. 612–1610.1016/j.msea.2012.07.035 ↗
17. S. Sheibani, S. Heshmati-Manesh, A. Ataie, A. Caballero and J.M. Criado: J. Alloys Compnd., 2014, vol. 587, pp.670-67610.1016/j.jallcom.2013.11.019 ↗
18. T. Klassen,U. Herr and R.S. Averback: Acta Mater., 1997, vol.45, pp. 2921-293010.1016/S1359-6454(96)00388-6 ↗
19. S. Sheibani, A. Ataie, S. Heshmati-Manesh, A. Caballero and J.M. Criado: Thermochim. Acta, 2011, vol. 526, pp.222-22810.1016/j.tca.2011.09.024 ↗
20. M.J Diánez, E. Donoso, M.J. Sayagués, A. Perejón, P.E. Sánchez-Jiménez, L.A. Pérez-Maqueda and J.M. Criado: J. Alloys Compnd., 2016, vol. 688, pp. 238-29410.1016/j.jallcom.2016.07.021 ↗
21. E. Donoso, A. Zúñiga, M.J. Diánez and J.M. Criado: J. Thermal Anal. Calorim., 2010, vol. 100, pp. 975-98010.1007/s10973-009-0642-y ↗
22. E. Donoso, G. Díaz and J.M. Criado: J. Thermal Anal. Calorim., 2008, vol. 91, pp.491-49510.1007/s10973-007-8551-4 ↗
23. S. Esmaeili, X. Wang, D.j. Lloyd and W.J. Poole: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 751–6310.1007/s11661-003-0110-4 ↗
24. H.E. Kissinger: Anal. Chem,1957, vol. 29, pp.1702-170610.1021/ac60131a045 ↗
25. J.M. Criado and A. Ortega: J. Non-Cryst. Solids, 1986, vol. 87, pp. 302-31110.1016/S0022-3093(86)80004-7 ↗
26. J.M. Criado and A. Ortega: Acta Metall., 1987, vol.35, pp. 1715-172110.1016/0001-6160(87)90117-9 ↗
27. D. Chen, X. Gao and D. Dollimore: Thermochim. Acta, 1993, vol. 215, pp. 109-11710.1016/0040-6031(93)80085-O ↗
28. S. Vyazovkin, A.K. Burhan, J.M. Criado, L.A, Pérez-Maqueda, C. Popescu, and N. Sbirrazzuoli: Thermochim. Acta, 2011, vol. 520, pp. 1–1910.1016/j.tca.2011.03.034 ↗
29. C.D. Doyle, Nature, 1966, vol. 20, pp. 290
30. L.A. Pérez-Maqueda, P.E. Sánchez-Jiménez and J.M. Criado: Int. J. Chem. Kinet., 2005, vol. 37, pp. 658-66610.1002/kin.20115 ↗
31. J.W. Christian: The theory of transformations in metals and alloys, 3rd edition. Pergamon Press, London, U.K., 2002, pp. 529-55210.1016/B978-008044019-4/50016-7 ↗
32. Z. Chvoj, J. Sestak, and A. Tritska: Kinetic Phase Diagrams. Non-equilibrium Phase Transitions, Elsevier, Amsterdam, The Netherland, 1991, p. 222
33. A.M. Brown and M.F. Ashby: Acta Metall.,1980, vol. 28, pp.1266-127110.1016/0001-6160(80)90092-9 ↗
34. A. Varchavsky and E. Donoso: J. Miner. Met., 1999, vol. 35B, pp. 255–76