journal article·2016-07

Ring-Constraint High-Pressure Torsion Process

Soo-Hyun Joo, Hyoung Seop Kim

Publisher page

Abstract

In this study, a constraint ring around a workpiece was employed in order to develop back pressure in addition to a compressive die pressure in high-pressure torsion (HPT) process. The influence of the constraint ring during the HPT process was analyzed using the finite element method and experimental analyses. Greater back pressure was developed when a ring of a stronger material enveloped the workpiece. In the experiments, fracture of a brittle material [e.g., La-based bulk metallic glass (BMG)], was limited even at large shear strain (~315) during the ring-constraint HPT (RC-HPT) process due to reduced tensile stress at the edge of the deforming BMG workpiece. Furthermore, the RC-HPT process had beneficial effects on powder consolidation and bonding. The RC-HPT process exhibited smaller loss of material than did the conventional semi-constrained HPT process. The Cu disk produced by the powder RC-HPT had smaller grain sizes because back pressure generated more dislocations and finer grain size in the Cu workpiece.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Alloys Wear and Properties · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Valiev RZ, Islamgaliev RK, Alexandrov IV. Prog Mater Sci 2000;45:103-89.10.1016/S0079-6425(99)00007-9 ↗
2. Valiev RZ, Alexandrov IV, Zhu YT, Lowe TC. J Mater Res 2002;17:5-8.10.1557/JMR.2002.0002 ↗
3. Saito Y, Utsunomiya H, Tsuji N, Sakai T. Acta Mater 1999;47:579-83.10.1016/S1359-6454(98)00365-6 ↗
4. Kim HS, Seo MH, Hong SI. J Mater Process Technol 2001;113:622-6.10.1016/S0924-0136(01)00710-5 ↗
5. Kim HS, Seo MH, Hong SI. J Mater Process Technol 2002;130-131:497-503.10.1016/S0924-0136(02)00796-3 ↗
6. Zhilyaev A, Langdon T. Prog Mater Sci 2008;53:893-979.10.1016/j.pmatsci.2008.03.002 ↗
7. Joo S-H, Yoon SC, Lee CS, Nam DH, Hong SH, Kim HS. J Mater Sci 2010;45:4652-8.10.1007/s10853-010-4382-y ↗
8. Lee Z. Scripta Mater 2004;51:209-14.10.1016/j.scriptamat.2004.04.016 ↗
9. Sort J, Zhilyaev A, Zielinska M, Nogués J, Suriñach S, Thibault J. Acta Mater 2003;51:6385-93.10.1016/j.actamat.2003.08.006 ↗
10. Stolyarov VV, Zhu YT, Lowe TC, Islamgaliev RK, Valiev RZ. Mater Sci Eng A 2000;282:78-85.10.1016/S0921-5093(99)00764-9 ↗
11. Bridgman PW. J Appl Phys 1953;24:560-70.10.1063/1.1721329 ↗
12. Cetlin PR, Aguilar MTP, Figueiredo RB, Langdon TG. J Mater Sci 2010;45:4561-70.10.1007/s10853-010-4384-9 ↗
13. Kang F, Wang JT, Peng Y. Mater Sci Eng A 2008;487:68-73.10.1016/j.msea.2007.09.063 ↗
14. Yoon SC, Bok CH, Seo MH, Kim TS, Kim HS. Mater Trans 2008;49:963-6.10.2320/matertrans.MC200723 ↗
15. Bonarski BJ, Mikułowski B, Schafler E, Holzleithner C, Zehetbauer MJ. Arch Metall Mater 2008;53:117-23.
16. Song Y, Yoon EY, Lee DJ, Lee JH, Kim HS. Mater Sci Eng A 2011;528:4840-4.10.1016/j.msea.2011.02.020 ↗
17. Yoon SC, Horita Z, Kim HS. J Mater Process Technol 2008;201:32-6.10.1016/j.jmatprotec.2007.11.204 ↗
18. Kim HS, Hong SI, Lee YS, Dubravina AA, Alexandrov IV. J Mater Process Technol 2003;142:334-7.10.1016/S0924-0136(03)00590-9 ↗
19. Pereira PHR, Figueiredo RB, Cetlin PR, Langdon TG. Mater Sci Eng A 2015;631:201-8.10.1016/j.msea.2015.02.052 ↗
20. Pereira PHR, Figueiredo RB, Huang Y, Cetlin PR, Langdon TG. Mater Sci Eng A 2014;593:185-8.10.1016/j.msea.2013.11.015 ↗
21. Lee DJ, Kim HS. J Mater Sci 2014;49:6620-8.10.1007/s10853-014-8283-3 ↗
22. Lee DJ, Yoon EY, Ahn DH, Park BH, Park HW, Park LJ, et al. Acta Mater 2014;76:281-93.10.1016/j.actamat.2014.05.027 ↗
23. Joo S-H, Pi D-H, Setyawan ADH, Kato H, Janecek M, Kim YC, Lee S, Kim HS. Sci Rep 2015;5:9660.10.1038/srep09660 ↗
24. McKenzie PWJ, Lapovok R, Estrin Y. Acta Mater 2007;55:2985-93.10.1016/j.actamat.2006.12.038 ↗
25. Zehetbauer MJ, Stüwe HP, Vorhauer A, Schafler E, Kohout J. Adv Eng Mater 2003;5:330-7.10.1002/adem.200310090 ↗
26. Xia K, Wang JT, Wu X, Chen G, Gurvan M. Mater Sci Eng A 2005;410-411:324-27.10.1016/j.msea.2005.08.123 ↗
27. Xia K, Wu X. Scripta Mater 2005;53:1225-29.10.1016/j.scriptamat.2005.08.012 ↗
28. Xia K, Wu X, Honma T, Ringer SP. J Mater Sci 2007;42:1551-60.10.1007/s10853-006-0819-8 ↗