journal article·2010-12

Dissolution and Interface Reactions between Palladium and Tin(Sn)-Based Solders: Part II. 63Sn-37Pb Alloy

Paul T. Vianco, Jerome A. Rejent, Gary L. Zender, Paul F. Hlava

Publisher page

Abstract

The interface microstructures as well as the rate kinetics of dissolution and intermetallic compound (IMC) layer formation were investigated for couples formed between molten 63Sn-37Pb (wt pct) solder and 99.9 pct Pd sheet. The solder bath temperatures were 488 K to 593 K (215 °C to 320 °C), and the immersion times were 5, 15, 30, 60, 120, and 240 seconds. The predominant IMC phases were Pd(Sn, Pb)4, PdSn4, and PdSn3. The IMC layer microstructure contained these phases and varying amounts of solder Pb- and Sn-rich phases. Isolated Pd-Sn needles appeared in the solder field at temperatures and times of ≥563 K (290 °C) and ≥30 seconds, respectively. Palladium dissolution was largely monotonic as a function of time and solder temperature, except for a sharp decline at 593 K (320 °C). The dissolution rate kinetics over 488 K to 563 K (215 °C to 290 °C) were represented by the At n exp(−ΔH/RT) equation. The values of n and ΔH were 0.67 ± 0.19 and 48 ± 20 kJ/mol, respectively, suggesting that a combination of interface reaction and solid-state mass transport processes controlled dissolution. The IMC layer grew monotonically with time and solder temperature, except at 593 K (320 °C) where growth dropped off significantly. The IMC growth rate kinetics over 488 K to 563 K (215 °C to 290 °C) exhibited values of n and ΔH equal to 0.88 ± 0.10 and 64 ± 10 kJ/mol, respectively, indicating a combination of interface reaction and solid-state diffusion processes. The extents of Pd dissolution and IMC layer development were significantly greater for molten Sn-Pb solder than the Pb-free Sn-Ag-Cu solder (Part I study) at a given test temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. P.T. Vianco: Circuit World, 1998, vol. 25, pp. 6–24.10.1108/03056129910244518 ↗
2. The State of the Art in Pb-Free Soldering Technology, 2nd ed., P. Vianco, ed., Surface Mount Technology Association, Edina, MN, 2004, CD-ROM.
3. D. Abbott, R. Brook, N. McClelland, and J. Wiley: IEEE Trans. Comp., Hybrids, Mfg. Technol., 1991, vol. 14, pp. 567–72.10.1109/33.83945 ↗
4. D. Romm and D. Abbott: Surf. Mount Technol., 1999, Jan., pp. 86–91.
5. K. Banerji and E. Bradley: Proc. Surface Mount Int. Conf., SMTA, Edina, MN, 1994, pp. 584–95.
6. W. Bader: Weld. J., 1969, vol. 48, pp. 551-s–557-s.
7. S. Vaynman, G. Ghosh, and M. Fine: J. Electron. Mater., 1998, vol. 27, pp. 1223–28.10.1007/s11664-998-0073-8 ↗
8. D.W. Finley, U. Ray, I. Artaki, P. Vianco, S. Shah, A. Reyes, and M. Haq: Proc. Surface Mount Int. Conf., SMTA, Edina, MN, 1995, pp. 941–53.
9. R. Pratt, E. Stromweld, and D. Quesnel: Sandia Report No. SAND93-7104, Sandia National Laboratories, Albuquerque, NM, 1993.
10. G. Ghosh: Mater. Trans. A, 1999, vol. 30A, pp. 5–19.10.1007/s11661-999-0191-9 ↗
11. G. Ghosh: J. Electron. Mater., 1998, vol. 27, pp. 1154–60.10.1007/s11664-998-0064-9 ↗
12. G. Ghosh: Acta Mater., 2000, vol. 48, pp. 3719–38.10.1016/S1359-6454(00)00165-8 ↗
13. B. Kobe and N. McIntyre: Acta Mater., 2002, vol. 50, pp. 4667–76.10.1016/S1359-6454(02)00319-1 ↗
14. Y. Wang and K. Tu: Appl. Phys. Lett., 1995, vol. 67, pp. 1069–71.10.1063/1.114467 ↗
15. Binary Alloy Phase Diagrams, T. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1986, vol. 2, p. 1848.
16. Binary Alloy Phase Diagrams, T. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1986, vol. 2, p. 1834.
17. P. Vianco: Environmentally Friendly Electronic Manufacturing—Pb Free Technology and Application, J. Hwang, ed., Electrochemical Pub., Ltd., British Isles, United Kingdom, 2001, p. 436.
18. P. Vianco, J. Martin, R. Wright, and P. Hlava: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1551–61.10.1007/s11661-006-0099-6 ↗