journal article·2013-07

Acoustic Emission Analysis of Damage during Compressive Deformation of Amorphous Zr-Based Foams with Aligned, Elongated Pores

Marie E. Cox, David C. Dunand

Publisher page

Abstract

Acoustic emission methods are used to investigate the evolution of internal microfractural damage during uniaxial compression of amorphous Zr-based foams with aligned, elongated pores. The foams are fabricated by means of densifying a blend of crystalline W powders and amorphous Zr-based powders with two oxygen contents (0.078 and 0.144 wt pct) by warm equal channel angular extrusion, followed by dissolution of the elongated W phase from the fully densified amorphous matrix. For the high-oxygen foams, prior powder boundaries in the amorphous struts promote damage that accumulates during compression, resulting in energy-absorbing properties comparable with the low-oxygen foams without stress-concentrating powder boundaries. The influence of pore orientation on the evolution of microfracture damage and the ability of the foams to accumulate damage without catastrophic failure is also investigated: pores oriented from 24 to 68 deg to the loading direction promote wall bending, resulting in foams with more diffuse damage and better energy-absorbing properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. D. C. Hofmann, J.-Y. Suh, A. Wiest, G. Duan, M.-L. Lind, M. D. Demetriou, and W. L. Johnson: Nature, 2008, vol. 451, pp. 1085–1089.10.1038/nature06598 ↗
2. H. Choi-Yim, R. Busch, U. Koster, and W. L. Johnson: Acta Mater., 1999, vol. 47, pp. 2455–2462.10.1016/S1359-6454(99)00103-2 ↗
3. H. Choi-Yim and W. L. Johnson: Appl. Phys. Lett., 1997, vol. 71, pp. 3808–3810.10.1063/1.120512 ↗
4. C. Fan, R. T. Ott, and T. C. Hufnagel: Appl. Phys. Lett., 2002, vol. 81, pp. 1020.10.1063/1.1498864 ↗
5. S. N. Mathaudhu, K. Ted Hartwig, and I. Karaman: J. Non-Cryst. Solids, 2007, vol. 353, pp. 185–193.10.1016/j.jnoncrysol.2006.06.009 ↗
6. G. Kumar, A. Desai and J. Schroers: Adv. Mater., 2011, vol. 23, pp. 461-476.10.1002/adma.201002148 ↗
7. A. H. Brothers and D. C. Dunand: Adv. Mater., 2005, vol. 17, pp. 484–486.10.1002/adma.200400897 ↗
8. C. A. Schuh, T. C. Hufnagel, and U. Ramamurty: Acta Mater., 2007,vol. 55, pp. 4067–4109.10.1016/j.actamat.2007.01.052 ↗
9. A. H. Brothers and D. C. Dunand: Scripta Mater., 2006 vol. 54, pp. 513–520.10.1016/j.scriptamat.2005.10.048 ↗
10. A. Inoue, T. Wada, X.M. Wang, and A.L. Greer: Mater. Sci. Eng. A, 2006, vol. 442, pp. 233–42.10.1016/j.msea.2006.04.143 ↗
11. M. D. Demetriou, J. P. Schramm, C. Veazey, W. L. Johnson, J. C. Hanan, and N. B. Phelps: Appl. Phys. Lett., 2007, vol. 91, pp. 161903.10.1063/1.2799248 ↗
12. A. H. Brothers, D. C. Dunand, Q. Zheng, and J. Xu: J. Appl. Phys., 2007, vol. 102, pp. 023508.10.1063/1.2756043 ↗
13. A. Brothers and D. Dunand: MRS Bull., 2007, vol. 32, pp. 639–643.10.1557/mrs2007.126 ↗
14. A. H. Brothers and D. C. Dunand: Acta Mater., 2005, vol. 53, pp. 4427–4440.10.1016/j.actamat.2005.06.002 ↗
15. H. Zhang, Z. Zhang, Z. Wang, K. Qiu, H. Zhang, and Q. Zang: Metall. Mater.Tran. A, 2006, vol. 37A, pp. 2459–2469.10.1007/BF02586219 ↗
16. H. Zhang, L. Liu, Z. Zhang, K. Qiu, X. Pan, H. Zhang, and Z. Wang: J. Mater. Res., 2006 vol. 21, pp. 1375–1384.10.1557/jmr.2006.0169 ↗
17. T. Wada, M. Kinaka, and A. Inoue: J.Mater. Res., 2006,vol. 21, pp. 1041–1047.10.1557/jmr.2006.0127 ↗
18. M. H. Lee and D. J. Sordelet: Appl. Phys Lett., 2006, vol. 89, p. 021921.10.1063/1.2221882 ↗
19. M. D. Demetriou, J. C. Hanan, C. Veazey, M. Di Michiel, N. Lenoir, E. Üstündag, and W. L. Johnson: Adv. Mater., 2007, vol. 19, pp. 1957–1962.10.1002/adma.200602136 ↗
20. A. H. Brothers, D. W. Prine, and D. C. Dunand: Intermetallics, 2006, vol. 14, pp. 857–865.10.1016/j.intermet.2006.01.029 ↗
21. A. H. Brothers, B. Mangrich, M. Cox, and D. C. Dunand: Scripta Mater., 2011, vol. 64, pp. 1031–1034.10.1016/j.scriptamat.2011.02.014 ↗
22. M. E. Cox, S. N. Mathaudhu, K. T. Hartwig, and D. C. Dunand: Metall. and Mater. Trans. A, 2009, vol. 41A, pp. 1706–1713.
23. V. M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, pp. 157–164.10.1016/0921-5093(95)09705-8 ↗
24. M.E. Cox and D.C. Dunand: Acta Mater., 2013, in review.
25. Y. Kawamura, H. Kato, A. Inoue, and T. Masumoto: Int. J. Powder Metall., 1997, vol. 33, pp. 50–61.
26. B. Gutenberg and C. F. Richter: Bulletin of the Seismological Society of America, 1942 vol. 32, pp. 163.10.1785/BSSA0320030163 ↗
27. J. Aue and J. T. M. De Hosson: J. Mater. Sci., 1998, vol. 33, pp. 5455–5462.10.1023/A:1004470905641 ↗