journal article·2004-06

Quantitative characterization of microstructures of liquid-phase-sintered two-phase materials

Jianxin Liu, Zhigang Zak Fang

Publisher page

Abstract

Many powder metallurgy materials have a common microstructure character—spherical or equiaxed particles embedded in a matrix. This article presents an analytical approach that establishes relationships between a broad range of three-dimensional (3-D) microstructure parameters and two-dimensional (2-D) measurements for these materials. Specifically, the grain coordination number, measured dihedral angle, connectivity, and contiguity are directly related to the solid volume fraction, interfacial energies (equilibrium dihedral angle), and grain size. The volume fraction, the equilibrium dihedral angle, and the grain sizes are treated as independent variables. Other microstructural parameters can be expressed as functions of these independent variables. Results show that when the mean grain size is smaller than a critical value, these microstructure parameters change rapidly as the grain grows during processing at high temperatures. When the mean grain size is larger than a critical value, these microstructure measurements approach corresponding stable values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. R.M. German: Powder Metallurgy Science, MPIF, Princeton, NJ, 1994.
2. John Lembo: Adv. Mater. Processes, 2003, vol. 161(1), pp. 52–53.
3. Z. Fang, G. Lockwood, and A. Griffo: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3231–38.10.1007/s11661-999-0233-3 ↗
4. J. Liu, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2209–20.10.1007/s11661-999-0033-9 ↗
5. J. Liu, Y. Liu, and R.M. German: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 3187–93.10.1007/s11661-000-0098-y ↗
6. J. Liu and R.M. German: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3211–17.10.1007/s11661-999-0231-5 ↗
7. J. Liu and R.M. German: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2087–95.10.1007/s11661-001-0020-2 ↗
8. G. Ondracek: Sci. Sintering, 1983, vol. 15, pp. 91–99.
9. K.S. Cherniavsky: Sci. Sintering, 1982, vol. 14, pp. 1–12.
10. H.E. Exner and J. Gurland: Powder Met., 1970, vol. 13, pp. 13–31.10.1179/pom.1970.13.25.002 ↗
11. R.M. German: Sintering Theory and Practice, Wiley-Interscience, New York, NY, 1996.
12. R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 279–88.10.1007/BF02664666 ↗
13. J.L. Johnson, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 857–66.10.1007/s11663-998-0145-4 ↗
14. R. Warren and M.B. Waldron: Powder Metall., 1972, vol. 15, pp. 166–80.10.1179/pom.1972.15.30.005 ↗
15. J. Gurland: Trans. TMS-AIME, 1958, vol. 212, pp. 452–55.
16. E.E. Underwood: Quantitative Stereology, Addison-Wesley, Reading, MA, 1970.
17. P.A. Tobias and D.C. Trindade: Applied Reliability, 2nd ed., Van Nostrand Reinhold, New York, NY, 1995.
18. Z. Fang, B.R. Patterson, and M.E. Turner: Acta Metall. Mater., 1992, vol. 40, pp. 713–22.10.1016/0956-7151(92)90013-5 ↗
19. Z. Fang, B.R. Patterson, and M.E. Turner, Jr.: Mater. Characterization, 1993, vol. 31, pp. 177–82.10.1016/1044-5803(93)90058-4 ↗
20. J. Gurland: in Powder Metallurgy in the Nuclear Age, F. Benesovsky, ed., Springer-Verlag, Vienna, 1962, pp. 507–08.
21. W. Chase and F. Bown: General Statistics, 2nd ed., John Wiley & Sons, New York, NY, 1992.
22. R.M. German: Liquid Phase Sintering, Plenum Press, New York, NY, 1985.10.1007/978-1-4899-3599-1 ↗
23. J. Liu and R.M. German: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 165–69.10.1007/s11661-001-0112-z ↗
24. J. Liu and R.M. German: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2607–14.10.1007/s11661-000-0205-0 ↗
25. E.K.H. Li and P.D. Funkenbusch: Acta Metall., 1989, vol. 37, pp. 1645–55.10.1016/0001-6160(89)90131-4 ↗
26. J. Liu and R.M. German: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 3125–31.10.1007/s11661-001-0187-6 ↗
27. S.C. Yang and R.M. German: Metall. Trans. A, 1991, vol. 22A, pp. 786–91.10.1007/BF02670302 ↗
28. W.J. Huppmann and H. Riegger: Int. J. Powder Metall. Powder Technol., 1977, vol. 13, pp. 243–46.
29. W.J. Huppmann: Z. Metallkd., 1979, vol. 10, pp. 792–97.
30. W.J. Huppmann, H. Riegger, and G. Petzow: Sci. Sintering, 1978, vol. 10, pp. 45–52.
31. G. Petzow and W.A. Kaysser: in Sintered Matel-Ceramic Composites, G.S. Upadhyaya, ed., Elsevier Science Publishers, Amsterdam, 1984, pp. 595–614.
32. H. Riegger, J.A. Pask, and H.E. Exner: Sintering Processes, G.C. Kuczynski, ed., Plenum Press, New York, NY, 1980, pp. 219–33.10.1007/978-1-4899-5301-8_19 ↗
33. R. Warren: J. Mater. Sci., 1968, vol. 3, pp. 471–85.10.1007/BF00549730 ↗
34. R. Warren: J. Mater. Sci., 1972, vol. 7, pp. 1434–42.10.1007/BF00574935 ↗
35. A. Bose and R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 3100–03.10.1007/BF02647738 ↗