Quantifying Pore Morphology in Spray-Formed Tantalum Using X-ray Micro-computed Tomography
Source abstract
Abstract
In order to establish quantitative process–structure–property relationships in thermal spray coatings, a robust framework for defining (micro)structural characteristics is needed. We present a quantitative characterization of the three-dimensional morphology of porosity in spray-formed tantalum samples based on high-resolution X-ray micro-computed tomography. Using synchrotron facilities, we acquired dozens of high-resolution scans, enabling a statistically meaningful comparison across multiple samples, different regions within samples, and spray processes. We quantify the spatial distribution, size, and topology of porous inclusions, with a significant focus on variability across samples and different spray processes (plasma and cold sprayed), as well as sensitivity to image segmentation and resolution. Based on a typical segmentation, we report porosities ranging from 0.9 to 1.7 pct for all samples tested, with significant sensitivity due to image segmentation resulting in estimates as low as 0.6 pct and as high as 4.8 pct. For the complex pore space morphology observed in these materials, we argue that a conventional analysis based on identifying individual pores is not well suited, and propose an alternative approach based on morphological metrics with a rich history in porous media literature, such as spatial correlations, local pore thickness, and scale-dependent sub-sampling. Spatial correlations indicate anisotropic splat structures, but only mildly anisotropic pores. Various measures of pore size show a wide distribution of sizes, ranging from sub-micron to 10-micron length scales. Scale-dependent variations in porosity suggest that representative volumes of several hundred microns are required for convergence of morphological metrics, with larger volumes for cold-spray materials. This work provides a robust quantitative basis for describing three-dimensional pore structure in thermal spray coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Cultural Heritage Materials Analysis · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. S. Sampath, X. Jiang, A. Kulkarni, J. Matejicek, D.L. Gilmore, and R.A. Neiser: Mater. Sci. Eng. A, 2003, vol. 348(1–2), pp. 54–66.10.1016/S0921-5093(02)00642-1 ↗
2. S. Sampath and X. Jiang: Mater. Sci. Eng. A, 2001, vol. 304–306, pp. 144–50.10.1016/S0921-5093(00)01464-7 ↗
3. R. McPherson: J. Mater. Sci., 1973, vol. 8(6), pp. 851–58.10.1007/BF02397914 ↗
4. P.S. Grant: Prog. Mater. Sci., 1995, vol. 39(4–5), pp. 497–545.10.1016/0079-6425(95)00004-6 ↗
5. A. Leatham: Met. Powder Rep., 1999, vol. 54(5), pp. 28–37.10.1016/S0026-0657(99)80500-1 ↗
6. V. Lachenicht, G. Scharf, D. Zebrowski, and A. Shalimov: Metallurgist, 2011, vol. 54(9–10), pp. 656–68.10.1007/s11015-011-9354-1 ↗
7. W.D. Cai and E.J. Lavernia: Mater. Sci. Eng. A, 1997, vol. 226, pp. 8–12.10.1016/S0921-5093(96)10580-3 ↗
8. W.D. Cai and E.J. Lavernia: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 1085–96.10.1007/s11663-998-0078-y ↗
9. V. Uhlenwinkel and N. Ellendt: in Materials Science Forum, vol. 534. Trans Tech Publ, pp. 429–32.10.4028/www.scientific.net/MSF.534-536.429 ↗
10. L. Mingxiang, C. Zhenshan, and S. Dashan: Procedia Manuf., 2018, vol. 15, pp. 1671–77.10.1016/j.promfg.2018.07.269 ↗
11. N.C. Wu, K. Chen, W.H. Sun, and J.Q. Wang: Surf. Eng., 2019, vol. 35(1), pp. 37–45.10.1080/02670844.2018.1447782 ↗
12. J.A. Gan and C.C. Berndt: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4844–58.10.1007/s11661-013-1818-4 ↗
13. S.D. Zhang, W.L. Zhang, S.G. Wang, X.J. Gu, and J.Q. Wang: Corros. Sci., 2015, vol. 93, pp. 211–21.10.1016/j.corsci.2015.01.022 ↗
14. J. Mostaghimi, S. Chandra, R. Ghafouri-Azar, and A. Dolatabadi: Surf. Coat. Technol., 2003, vol. 163, pp. 1–11.10.1016/S0257-8972(02)00686-2 ↗
15. B.S. Schorr, K.J. Stein, and A.R. Marder: Mater. Charact., 1999, vol. 42(2–3), pp. 93–100.10.1016/S1044-5803(98)00048-5 ↗
16. S. Deshpande, A. Kulkarni, S. Sampath, and H. Herman: Surf. Coat. Technol., 2004, vol. 187(1), pp. 6–16.10.1016/j.surfcoat.2004.01.032 ↗
17. S. Ahmadian, A. Browning, and E.H. Jordan: Scripta Mater., 2015, vol. 97, pp. 13–16.10.1016/j.scriptamat.2014.10.026 ↗
18. X. Zhang, J. Kulczyk-Malecka, J. Carr, P. Xiao, and P.J. Withers: J. Am. Ceram. Soc., 2018, vol. 101(6), pp. 2482–92.10.1111/jace.15409 ↗
19. W. Zhu, X.N. Cai, L. Yang, J. Xia, Y.C. Zhou, and Z.P. Pi: Surf. Coat. Technol., 2019, vol. 357, pp. 372–78.10.1016/j.surfcoat.2018.10.029 ↗
20. B.A. Kahl, Y.S. Yang, C.C. Berndt, and A.S.M. Ang: Surf. Coat. Technol., 2022, vol. 436, 128267.10.1016/j.surfcoat.2022.128267 ↗
21. C. Hampel: Ind. Eng. Chem., 1961, vol. 53(2), pp. 90–96.10.1021/ie50614a018 ↗
22. J.A. Slotwinski, E.J. Garboczi, and K.M. Hebenstreit: J. Res. Nat. Inst. Stand. Technol., 2014, vol. 119, p. 494.10.6028/jres.119.019 ↗
23. A. Sola and A. Nouri: J. Adv. Manuf. Process., 2019, vol. 1(3), p. e10021.10.1002/amp2.10021 ↗
24. K. Essa, P. Jamshidi, J. Zou, M.M. Attallah, and H. Hassanin: Mater. Des., 2018, vol. 138, pp. 21–29.10.1016/j.matdes.2017.10.025 ↗
25. Y. Torres, J.J. Pavón, I. Nieto, and J.A. Rodríguez: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 891–900.10.1007/s11663-011-9521-6 ↗
26. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, and S. Sampath: J. Therm. Spray Technol., 1999, vol. 8(4), pp. 559–64.10.1361/105996399770350250 ↗
27. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, M.F. Smith, and T.J. Roemer: J. Therm. Spray Technol., 1999, vol. 8(4), pp. 576–82.10.1361/105996399770350278 ↗
28. J.F. Hunter: Overview of Tomography Developments at LANL. Tech. rep., Los Alamos National Lab. (LANL), Los Alamos, NM, 2011.
29. G.F. Vander Voort: Metallography, Principles and Practice, ASM International, Materials Park, 1999.
30. V.A. Phillips: 1971.
31. J.H. Richardson: Optical Microscopy for the Materials Sciences, 1971.
32. J.I. Goldstein, D.E. Newbury, J.R. Michael, N.W.M. Ritchie, J.H.J. Scott, and D.C. Joy: Scanning Electron Microscopy and X-ray Microanalysis, Springer, New York, 2017.
33. J.W. Edington and K.C. Thompson-Russell: Practical Electron Microscopy in Materials Science, Macmillan International Higher Education, London, 1977.
34. R. Sobhanverdi and A. Akbari: Ceram. Int., 2015, vol. 41(10), pp. 14517–28.10.1016/j.ceramint.2015.07.102 ↗
35. W. Tillmann, O. Khalil, and M. Abdulgader: Coatings, 2019, vol. 9(10), p. 601.10.3390/coatings9100601 ↗
36. S. Torquato and G. Stell: J. Chem. Phys., 1982, vol. 77(4), pp. 2071–77.10.1063/1.444011 ↗
37. S. Torquato: Random Heterogeneous Materials: Microstructure and Macroscopic Properties, 16th ed. Springer, New York, 2000.
38. R. Hilfer: Phys. Rev. B, 1992, vol. 45(13), p. 7115.10.1103/PhysRevB.45.7115 ↗
39. B. Biswal, C. Manwart, and R. Hilfer: Physica A, 1998, vol. 255(3–4), pp. 221–41.10.1016/S0378-4371(98)00111-3 ↗
40. C.H. Arns, M.A. Knackstedt, W.V. Pinczewski, and K.R. Mecke: Phys. Rev. E, 2001, vol. 63(3), p. 031112.10.1103/PhysRevE.63.031112 ↗
41. C.H. Arns, M.A. Knackstedt, and K.R. Mecke: in Morphology of Condensed Matter. Springer, New York, 2002. pp. 37–74.10.1007/3-540-45782-8_2 ↗
42. G.E. Schröder-Turk, W. Mickel, S.C. Kapfer, M.A. Klatt, F.M. Schaller, M.J.F. Hoffmann, N. Kleppmann, P. Armstrong, A. Inayat, D. Hug, M. Reichelsdorger, W. Peukert, W. Schwieger, and K. Mecke: Adv. Mater., 2011, vol. 23(22–23), pp. 2535–53.10.1002/adma.201100562 ↗
43. A. Gupta, A. Cecen, S. Goyal, A.K. Singh, and S.R. Kalidindi: Acta Mater., 2015, vol. 91, pp. 239–54.10.1016/j.actamat.2015.02.045 ↗
44. S.R. Kalidindi and M. De Graef: Annu. Rev. Mater. Res., 2015, vol. 45, pp. 171–93.10.1146/annurev-matsci-070214-020844 ↗
45. D. Wildenschild and A.P. Sheppard: Adv. Water Resour., 2013, vol. 51, pp. 217–46.10.1016/j.advwatres.2012.07.018 ↗
46. M. Sahimi: Heterogeneous Materials I: Linear Transport and Optical Properties, vol. 22, Springer, New York, 2003.
47. W.J. Whitehouse: J. Microsc., 1974, vol. 101(2), pp. 153–68.10.1111/j.1365-2818.1974.tb03878.x ↗
48. D. Ulrich, B. Van Rietbergen, A. Laib, and P. Ruegsegger: Bone, 1999, vol. 25(1), pp. 55–60.10.1016/S8756-3282(99)00098-8 ↗
49. R.A. Ketcham and T.M. Ryan: J. Microsc., 2004, vol. 213(2), pp. 158–71.10.1111/j.1365-2818.2004.01277.x ↗
50. M.A. Groeber and M.A. Jackson: Integr. Mater. Manuf. Innov., 2014, vol. 3(1), p. 5.10.1186/2193-9772-3-5 ↗
51. P.R. Shearing, L.E. Howard, P.S. Jørgensen, N.P. Brandon, and S.J. Harris: Electrochem. Commun., 2010, vol. 12(3), pp. 374–77.10.1016/j.elecom.2009.12.038 ↗
52. M. Ebner, F. Marone, M. Stampanoni, and V. Wood: Science, 2013, vol. 342(6159), pp. 716–20.10.1126/science.1241882 ↗
53. T. Hutzenlaub, A. Asthana, J. Becker, D.R. Wheeler, R. Zengerle, and S. Thiele: Electrochem. Commun., 2013, vol. 27, pp. 77–80.10.1016/j.elecom.2012.11.006 ↗
54. C.D. Yarrington, R.R. Wixom, and D.L. Damm: J. Appl. Phys., 2018, vol. 123(10), p. 105901.10.1063/1.5022042 ↗
55. C.H. Li and C.K. Lee: Pattern Recogn., 1993, vol. 26(4), pp. 617–25.10.1016/0031-3203(93)90115-D ↗
56. N. Otsu: IEEE Trans. Syst. Man Cybern., 1979, vol. 9(1), pp. 62–66.10.1109/TSMC.1979.4310076 ↗
57. P. Iassonov, T. Gebrenegus, and M. Tuller: Water Resour. Res., 2009. vol. 45(9).10.1029/2009WR008087 ↗
58. S. Schluter, A.P. Sheppard, K. Brown, and D. Wildenschild: Water Resour. Res., 2014, vol. 50(4), pp. 3615–39.10.1002/2014WR015256 ↗
59. L. Grady: IEEE Trans. Pattern Anal. Mach. Intell., 2006, vol. 28(11), pp. 1768–83.10.1109/TPAMI.2006.233 ↗
60. S. Van der Walt, J.L. Schönberger, J. Nunez-Iglesias, F. Boulogne, J.D. Warner, N. Yager, E. Gouillart, and T. Yu: PeerJ, 2014, vol. 2, p. e453.10.7717/peerj.453 ↗
61. T. Lewiner, H. Lopes, A.W. Vieira, and G. Tavares: J. Graphics Tools, 2003, vol. 8(2), pp. 1–15.10.1080/10867651.2003.10487582 ↗
62. K.A. Culligan, D. Wildenschild, B.S.B. Christensen, W.G Gray, M.L. Rivers, and A.F.B. Tompson: Water Resour. Res., 2004. vol. 40(12).10.1029/2004WR003278 ↗
63. M. Hutter: Phys. Rev. E, 2003, vol. 68(3), p. 031404.10.1103/PhysRevE.68.031404 ↗
64. Y. Jiao, F.H. Stillinger, and S. Torquato: Phys. Rev. E, 2007, vol. 76(3), p. 031110.10.1103/PhysRevE.76.031110 ↗
65. J.G. Berryman: J. Appl. Phys., 1985, vol. 57(7), pp. 2374–84.10.1063/1.334346 ↗
66. D.T. Fullwood, S.R. Niezgoda, B.L. Adams, and S.R. Kalidindi: Prog. Mater. Sci., 2010, vol. 55(6), pp. 477–562.10.1016/j.pmatsci.2009.08.002 ↗
67. M. Rotter, A. Berg, H. Langenberger, S. Grampp, H. Imhof, and E. Moser: J. Magn. Reson. Imaging, 2001, vol. 14(1), pp. 87–93.10.1002/jmri.1156 ↗
68. M.J. Wald, B. Vasilic, P.K. Saha, and F.W. Wehrli: Med. Phys., 2007, vol. 34(3), pp. 1110–20.10.1118/1.2437281 ↗
69. A. AbuBaker, R. Qahwaji, S. Ipson, and M. Saleh: in 2007 IEEE International Conference on Signal Processing and Communications. IEEE, pp. 1283–86.10.1109/ICSPC.2007.4728561 ↗
70. A.P. Sheppard, R.M. Sok, and H. Averdunk: in International Symposium of the Society of Core Analysts, vol. 2125. pp. 1–11.
71. H. Dong and M.J. Blunt: Phys. Rev. E, 2009, vol. 80(3), p. 036307.10.1103/PhysRevE.80.036307 ↗
72. A. Rabbani, S. Jamshidi, and S. Salehi: J. Petrol. Sci. Eng., 2014, vol. 123, pp. 164–71.10.1016/j.petrol.2014.08.020 ↗
73. J.-F. Thovert, F. Yousefian, P. Spanne, C.G. Jacquin, and P.M. Adler: Phys. Rev. E, 2001, vol. 63(6), p. 061307.10.1103/PhysRevE.63.061307 ↗
74. W. Mickel, S. Munster, L.M. Jawerth, D.A. Vader, D.A. Weitz, A.P. Sheppard, K. Mecke, B. Fabry, and G.E. Schroder-Turk: Biophys. J ., 2008, vol. 95(12), pp. 6072–80.10.1529/biophysj.108.135939 ↗
75. R.D. Hazlett: Transp. Porous Med., 1995, vol. 20(1–2), pp. 21–35.10.1007/BF00616924 ↗
76. J.T. Gostick, Z.A. Khan, T.G. Tranter, M.D.R. Kok, M. Agnaou, M. Sadeghi, and R. Jervis: J. Open Source Softw., 2019, vol. 4(37), p. 1296.10.21105/joss.01296 ↗
77. A.E. Scheidegger: Soil Sci., 1958, vol. 86(6), p. 355.10.1097/00010694-195812000-00015 ↗
78. S. Torquato and M. Avellaneda: J. Chem. Phys., 1991, vol. 95(9), pp. 6477–89.10.1063/1.461519 ↗
79. X. Liu and V. Shapiro: Comput. Mater. Sci., 2015, vol. 99, pp. 177–89.10.1016/j.commatsci.2014.12.017 ↗
80. B. Lu and S. Torquato: J. Chem. Phys., 1990, vol. 93(5), pp. 3452–59.10.1063/1.458827 ↗