journal article·2023-07Open access

Effects of Different Si Content and Thermal Stories on the Secondary Phase Formation, Hot Ductility, and Stress Rupture Properties of Alloy 718 Investment Castings

Andrea Niklas, Fernando Santos, Rodolfo Gonzalez-Martinez, Pedro Pablo Rodríguez, Daniel Bernal, Alberto Cobos, Lexuri Vázquez, Pedro Álvarez

Abstract

Herein, the effects of microstructure on high-temperature properties (hot ductility and stress rupture life) were investigated in alloy 718 investment castings manufactured with different Si contents (0.051, 0.11, and 0.17 wt pct) and different cooling rates (0.52 °C/s and 1.65 °C/s). For the casting with a low cooling rate, an additional solution treatment step was added to the standard pre-weld heat treatment. Even small amounts of residual Laves phase (0.14 to 0.35 wt pct) adversely affected both the hot ductility and stress rupture properties. Hot ductility tests indicated that the presence of Laves phase led to an earlier decrease in hot ductility in on-heating tests and retarded ductility recovery in on-cooling tests. Both effects are usually associated with poorer weldability and greater hot cracking susceptibility. Ductility recovery was also affected by grain size and aspect ratio: columnar and smaller grain sizes showed better ductility recovery behavior. Stress rupture tests indicated that stress rupture life and elongation decreased with increasing Si content, due to the presence of a semicontinuous network of Laves phase at grain boundaries instead of intergranular δ phases. This effect was much more pronounced in stress rupture than in hot ductility tests. The presence of residual Laves phase was associated with higher Si content and lower cooling rates. The additional solution treatment step of 2 hours at 1052 °C did not eliminate the Laves phase completely.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M.J. Donachie and S.J. Donachie: Superalloys: A Technical Guide, 2nd ed. ASM International, Novelty, OH, 2002, pp. 1–38.10.31399/asm.tb.stg2.9781627082679 ↗
2. J.F. Radavich: Superalloy 718-Metallurgy and Applications, The Minerals, Metals & Materials Society, Warrendale, PA, 1989, pp. 229–40.
3. X. Liang, R. Zhang, Y. Yang, and Y. Han: Superalloys 718, 625, 706 and Various Derivatives, The Minerals Metals & Materials Society, Warrendale, PA, 1994, pp. 947–56.10.7449/1994/Superalloys_1994_947_956 ↗
4. Z.J. Miao, A.D. Shan, Y.B. Wu, J. Lu, W.L. Xu, and H.W. Song: Trans. Nonferrous Met. Soc. China, 2011, vol. 21, pp. 1009–017.10.1016/S1003-6326(11)60814-5 ↗
5. W.D. Cao, R.L. Kennedy, and M.P. Willis: Superalloys 718, 625, and Various Derivative, Metals and Materials Society, Warrendale, PA, The Minerals, 1991, pp. 147–60.10.7449/1991/Superalloys_1991_147_160 ↗
6. B.G. Muralidharan, V. Shankar, and T.P.S. Gill: Weldability of Inconel 718-A Review, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu, 1996.
7. R.G. Thompson and S. Genculu: Weld. J., 1983, vol. 62, pp. 337–45.
8. S. Singh and J. Andersson: Sci. Technol. Weld. Join., 2018, vol. 23, pp. 568–74.10.1080/13621718.2018.1429238 ↗
9. S. Singh, F. Hanning, and J. Andersson: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 6248–257.10.1007/s11661-020-06004-8 ↗
10. J. Andersson, G.P. Sjöberg, L. Viskari, and M.C. Chaturvedi: Mater. Sci. Technol., 2012, vol. 28, pp. 609–19.10.1179/1743284711Y.0000000101 ↗
11. J. Andersson, G.P. Sjöberg, L. Viskari, and M. Chaturvedi: Mater. Sci. Technol., 2012, vol. 28, pp. 733–41.10.1179/1743284712Y.0000000002 ↗
12. S. Singh, F. Hanning, and J. Andersson: Mater. Sci. Eng. A, 2021, vol. 799, p. 140151.10.1016/j.msea.2020.140151 ↗
13. S. Guo, W. Sun, D. Lu, and Z. Hu: Superalloys 718, 625, 706 and Various Derivatives, The Minerals, Metals & Materials Society, Warrendale, PA, 1997, pp. 521–30.10.7449/1997/Superalloys_1997_521_530 ↗
14. J.J. Schirra, R.H. Caless, and R.W. Hatala: Superalloys 718, 625 and Various Derivatives, The Minerals, Metals & Materials Society, Warrendale, PA, 1991, pp. 375–88.10.7449/1991/Superalloys_1991_375_388 ↗
15. E. Hosseini and V.A. Popovich: Addit. Manuf., 2019, vol. 30, p. 100877.
16. V.A. Popovich, E.V. Borisov, V. Heurtebise, T. Riemslag, A.A. Popovich, and V.S. Sufiiarov: TMS 147th Annual Meeting & Exhibition Supplemental Proceedings, Springer, Cham, 2018, pp. 85–97.10.1007/978-3-319-72526-0_9 ↗
17. S. Sui, H. Tan, J. Chen, C. Zhong, Z. Li, W. Fan, A. Gasser, and W. Huang: Acta Mater., 2019, vol. 164, pp. 413–27.10.1016/j.actamat.2018.10.032 ↗
18. P. Álvarez, A. Cobos, L. Vázquez, N. Ruiz, P.P. Rodríguez, A. Magaña, A. Niklas, and F. Santos: Metals, 2021, vol. 11, p. 402.10.3390/met11030402 ↗
19. J.J. Schirra: Superalloys 718, 625, 706 and Various Derivatives, The Minerals, Metals & Materials Society, Warrendale, PA, 1997, pp. 439–66.10.7449/1997/Superalloys_1997_439_446 ↗
20. ISO/TR 17641-3:2005(E) Destructive Tests on Welds in Metallic Materials-Hot Cracking Tests for Weldments-Arc Welding Processes-Part 3: Externally Loaded Tests, International Organization for Standardization (ISO), Geneva, 2005.
21. R.G. Thompson, J.R. Dobbs, and D.E. Mayo: Weld. J., 1986, vol. 65, pp. 299–304.
22. J.N. DuPont, J.C. Lippold, and S.D. Kiser: Welding Metallurgy and Weldability of Nickel-Base Alloys, Wiley, Hoboken, NJ, 2009.10.1002/9780470500262 ↗
23. W.A. Baeslack III. and D.E. Nelson: Metallography, 1986, vol. 19, pp. 371–79.10.1016/0026-0800(86)90024-8 ↗
24. I. Woo, K. Nishimoto, K. Tanaka, and M. Shirai: Weld. Int., 2000, vol. 14, pp. 514–22.10.1080/09507110009549223 ↗
25. S. Benhadad, N.L. Richards, and M.C. Chaturvedi: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2005–017.10.1007/s11661-002-0033-5 ↗
26. L. Shuqi, Z. Jingyun, Y. Jinyan, Q. Deng, and J. Du: Superalloys 718, 625, 706 and Various Derivatives, The Minerals, Metals & Materials Society, Warrendale, PA, 1994, pp. 545–5.
27. G. Sjoberg and N.G. Ingesten: Superalloys 718, 625 and Various Derivatives, The Minerals, Metals & Materials Society, Warrendale, PA, 1991, pp. 603–20.10.7449/1991/Superalloys_1991_603_620 ↗
28. D.-W. Han, L.-X. Yu, F. Liu, B. Zhang, and W.-R. Sun: Metall. Sin. (Engl. Lett.), 2018, vol. 31, pp. 1224–32.10.1007/s40195-018-0790-9 ↗
29. M.G. Burke and M.K. Miller: Superalloys 718, 625 and Various Derivatives, The Minerals, Metals & Materials Society, Warrendale, PA, 1991, pp. 337–50.10.7449/1991/Superalloys_1991_337_350 ↗