journal article·2023-05Open access

Combining 2D and 3D Characterization Techniques for Determining Effects of HIP Rejuvenation After Fatigue Testing of SX Microstructures

A. Dennstedt, I. Lopez-Galilea, B. Ruttert, W. Theisen, M. Bartsch

Abstract

Abstract A hot isostatic pressing rejuvenation heat treatment is applied to a CMSX-4 type SX superalloy after it has been subjected to a low-cycle fatigue test to rupture. The evolution of microstructural defects, such as pores and cracks which are present after fatigue, has been tracked in 3D by X-ray tomography before and after rejuvenation. From the rejuvenated specimen, series of metallographic cross sections were prepared and investigated by scanning electron microscopy for getting complementary 2D information at high resolution. The micrographs were stitched to a panorama which was then matched into the 3D representation of the specimen volume. By combining 3D and 2D data, statistical volume-related quantities were achieved, while detailed characteristics have been assigned to individual defects present in the 2D panorama micrograph. This technique is in general appropriate for length-scale bridging microstructural investigations. Results of the performed investigations concerning the rejuvenation effect on the microstructure are presented and discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. J.-Y. Guédou and L. Rémy: in Nickel Base Single Crystals Across Length Scales, G. Cailletaud, J. Cormier, G. Eggeler, V. Maurel, and L. Nazé, eds., Elsevier, Amsterdam, 2022, pp. 3–19.10.1016/B978-0-12-819357-0.00008-1 ↗
3. A.I. Epishin, T. Link, B. Fedelich, I.L. Svetlov, and E.R. Golubovskiy: Matec Web Conference, vol. 14, 2014. https://doi.org/10.1051/matecconf/20141408003.10.1051/matecconf/20141408003 ↗
4. B. Ruttert, D. Bürger, L.M. Roncery, A.B. Parsa, P. Wollgramm, G. Eggeler, and W. Theisen: Mater. Des., 2017, vol. 134, pp. 418–25. https://doi.org/10.1016/j.matdes.2017.08.059.10.1016/j.matdes.2017.08.059 ↗
5. B. Ruttert, O. Horst, I. Lopez-Galilea, D. Langenkamper, A. Kostka, C. Somsen, J.V. Goerler, M.A. Ali, O. Shchyglo, I. Steinbach, G. Eggeler, and W. Theisen: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4262–73. https://doi.org/10.1007/s11661-018-4745-6.10.1007/s11661-018-4745-6 ↗
6. O.M. Horst, B. Ruttert, D. Bürger, L. Heep, H. Wang, A. Dlouhy, W. Theisen, and G. Eggeler: Mater. Sci. Eng. A Struct., 2019, vol. 758, pp. 202–14. https://doi.org/10.1016/j.msea.2019.04.078.10.1016/j.msea.2019.04.078 ↗
7. C. Meid, A. Dennstedt, M. Ramsperger, J. Pistor, B. Ruttert, I. Lopez-Galilea, W. Theisen, C. Körner, and M. Bartsch: Scripta Mater., 2019, vol. 168, pp. 124–28. https://doi.org/10.1016/j.scriptamat.2019.05.002.10.1016/j.scriptamat.2019.05.002 ↗
8. A.B. Parsa, P. Wollgramm, H. Buck, C. Somsen, A. Kostka, I. Povstugar, P.P. Choi, D. Raabe, A. Dlouhy, J. Müller, E. Spiecker, K. Demtroder, J. Schreuer, K. Neuking, and G. Eggeler: Adv. Eng. Mater., 2015, vol. 17, pp. 216–30. https://doi.org/10.1002/adem.201400136.10.1002/adem.201400136 ↗
9. C. Meid, U. Waedt, A. Subramaniam, J. Wischek, M. Bartsch, P. Terberger, and R. Vassen: Materialwiss Werkst, 2019, vol. 50, pp. 777–87. https://doi.org/10.1002/mawe.201800135.10.1002/mawe.201800135 ↗
10. C. Meid: Ruhr-Universität Bochum, Universitätsbibliothek, 2019. https://doi.org/10.13154/294-634710.13154/294-6347 ↗
11. “AVIZO”: http://www.thermofisher.com/amira-avizo. Accessed 04 August 2022.
12. D. Baum and J. Titschack: EuroVis 2016—Short Papers, 2016, pp. 113–17. https://doi.org/10.2312/eurovisshort.20161171.10.2312/eurovisshort.20161171 ↗
13. L.G. Brown: Comput. Surv., 1992, vol. 24, pp. 325–76. https://doi.org/10.1145/146370.146374.10.1145/146370.146374 ↗
14. A.R. Durmaz, N. Hadzic, T. Straub, C. Eberl, and P. Gumbsch: Exp. Mech., 2021, vol. 61, pp. 1489–1502. https://doi.org/10.1007/s11340-021-00758-x.10.1007/s11340-021-00758-x ↗
15. “Image Composite Editor”: https://www.microsoft.com/en-us/research/project/image-composite-editor/. Accessed 04 August 2022.
16. C. Meid: Images Prepared in Frame of PhD work, provided as courtesy by the author of the thesis.
17. E. Saiti and T. Theoharis: Comput. Graph., 2020, vol. 91, pp. 153–78. https://doi.org/10.1016/j.cag.2020.07.012.10.1016/j.cag.2020.07.012 ↗
18. A. Goshtasby: 2-D and 3-D Image Registration: for Medical, Remote Sensing, and Industrial Applications, Wiley, Incorporated, 2005.10.1002/0471724270 ↗
19. C. Körner, M. Ramsperger, C. Meid, D. Bürger, P. Wollgramm, M. Bartsch, and G. Eggeler: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3781–92. https://doi.org/10.1007/s11661-018-4762-5.10.1007/s11661-018-4762-5 ↗
20. L.M. Bortoluci Ormastroni, I. Lopez-Galilea, J. Pistor, B. Ruttert, C. Körner, W. Theisen, P. Villechaise, F. Pedraza, and J. Cormier: Addit. Manuf., 2022, https://doi.org/10.1016/j.addma.2022.102759.10.1016/j.addma.2022.102759 ↗
21. C. Meid, M. Eggeler, P. Watermeyer, A. Kostka, T. Hammerschmidt, R. Drautz, G. Eggeler, and M. Bartsch: Acta Mater., 2019, vol. 168, pp. 343–52. https://doi.org/10.1016/j.actamat.2019.02.022.10.1016/j.actamat.2019.02.022 ↗