journal article·2023-02Open access

Accumulative Roll Bonding of Alloy 2205 Duplex Steel and the Accompanying Impacts on Microstructure, Texture, and Mechanical Properties

J. S. Carpenter, D. J. Savage, C. A. Miller, R. J. McCabe, S. J. Zheng, D. R. Coughlin, S. C. Vogel

Abstract

The mechanical and microstructural evolution of Alloy 2205 during severe plastic deformation is examined in this study. A combination of accumulative roll bonding (ARB) and cold rolling results in the successful formation of a nanograined dual-phase microstructure of austenite and ferrite with some transformed martensite. Severe deformation to cumulative reductions of 80.5, 92.5, 95, and 97 pct were performed. Microscopy indicates that grain dimensions in the sheet normal direction is less than 100 nm for reductions ≥ 92.5 pct. Shear banding is observed at reductions ≥ 95 pct while twinning is only observed at reductions < 92.5 pct. Neutron diffraction measurements indicated the presence of martensite for reductions ≥ 95 pct at ~ 8 pct volume fraction. Taken in conjunction, it appears that during initial ARB processing, both slip and twinning are active plastic mechanisms. As twinning becomes exhausted, martensitic transformation, slip, and intermittent shear banding account for the active plasticity mechanisms. Material hardness saturates at 92.5 pct reduction, with a maximum hardness of 45 HRC. Sub-sized tensile testing confirms this approximate hardness with measurements indicating a UTS of ~ 1440 MPa. Texture analysis of crystal orientation distributions in the plate normal direction suggest an approximate Kurdjumov–Sachs orientation relationship at all reductions above 80 pct indicating stability of the orientation relationship at high strains. The intragranular structure develops a fine scale sub-grain content with increasing deformation, resulting in a continual evolution of texture up to and including 97 pct reduction. The final structure presents strong components of Goss and rotated cube texture in both the austenite and ferrite. This body of work aims to compare ARB of an industrially relevant FCC/BCC system (Alloy 2205) to historical model FCC/BCC systems such as Cu/Nb.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. P.D. Funkenbusch and T.H. Courtney: Acta Metall., 1985, vol. 33, pp. 913–22.10.1016/0001-6160(85)90116-6 ↗
2. H.P. Wahl and G. Wassermann: Z. Metallk., 1970, vol. 61, p. 326.
3. G. Frommeyer and G. Wassermann: Acta Metall., 1975, vol. 23, p. 1353.10.1016/0001-6160(75)90144-3 ↗
4. C.L. Trybus and W.A. Spitzig: Acta Metall., 1989, vol. 37, pp. 1971–81.10.1016/0001-6160(89)90081-3 ↗
5. W.A. Spitzig, A.R. Pelton, and F.C. Laabs: Acta Metall., 1987, vol. 35, pp. 2427–42.10.1016/0001-6160(87)90140-4 ↗
6. A. Misra, M. Verdier, Y.C. Lu, H. Kung, T.E. Mitchell, N. Nastasi, and J.D. Embury: Scripta Mater., 1998, vol. 39, pp. 555–60.10.1016/S1359-6462(98)00196-1 ↗
7. J.T. Wood, A.J. Griffin Jr., J.D. Embury, R. Zhou, M. Nastasi, and M. Veron: J. Mech. Phys. Solids, 1996, vol. 44, pp. 737–50.10.1016/0022-5096(96)00010-5 ↗
8. K. Adachi, S. Tsubokawa, T. Takeuchi, and H.G. Suzuki: J. Jpn Inst. Met., 1997, vol. 61, pp. 397–403.10.2320/jinstmet1952.61.5_397 ↗
9. T.E. Mitchell, Y.C. Lu, A.J. Griffin, M. Nastasi, and H. Kung: J. Am. Ceram. Soc., 1997, vol. 80, pp. 1673–76.10.1111/j.1151-2916.1997.tb03037.x ↗
10. S.A. Barnett and M. Shinn: Annu. Rev. Mater. Sci., 1994, vol. 24, pp. 481–511.10.1146/annurev.ms.24.080194.002405 ↗
11. A. Misra and R. Hoagland: J. Mater. Res., 2005, vol. 20, pp. 2046–54.10.1557/JMR.2005.0250 ↗
12. J.S. Carpenter, S.J. Zheng, R.F. Zhang, S.C. Vogel, I.J. Beyerlein, and N.A. Mara: Philos. Mag., 2013, vol. 93, pp. 718–35.10.1080/14786435.2012.731527 ↗
13. J.S. Riano and A.M. Hodge: Scripta Mater., 2019, vol. 166, pp. 19–23.10.1016/j.scriptamat.2019.02.043 ↗
14. W.F. Yang, I.J. Beyerlein, Q.Q. Jin, H.L. Ge, T. Xiong, L.X. Yang, J.C. Pang, Y.T. Zhou, X.H. Shao, B. Zhang, S.J. Zheng, and X.L. Ma: Scripta Mater., 2019, vol. 166, pp. 73–77.10.1016/j.scriptamat.2019.03.007 ↗
15. W.Z. Han, M.J. Demkowicz, N.A. Mara, E.F. Fu, S. Sinha, A.D. Rollett, Y.Q. Wang, J.S. Carpenter, I.J. Beyerlein, and A. Misra: Adv. Mater., 2013, vol. 25, pp. 6975–79.10.1002/adma.201303400 ↗
16. L.F. Zeng, P. Fan, L.F. Zhang, R. Gao, Z.M. Xie, Q.F. Fang, X.P. Wang, D.Q. Yuan, T. Zhang, and C.S. Liu: J. Nucl. Mater., 2018, vol. 508, pp. 354–60.10.1016/j.jnucmat.2018.05.073 ↗
17. W.Z. Han, N.A. Mara, Y.Q. Wang, A. Misra, and M.J. Demkowicz: J. Nucl. Mater., 2014, vol. 452, pp. 57–60.10.1016/j.jnucmat.2014.04.034 ↗
18. H.P.A. Ali, I. Radchenko, N. Li, and A. Budiman: Mater. Sci. Eng. A, 2018, vol. 738, pp. 253–63.10.1016/j.msea.2018.09.094 ↗
19. J. Wang, Q. Zhou, S. Shao, and A. Misra: Mater. Res. Lett., 2017, vol. 5, pp. 1–19.10.1080/21663831.2016.1225321 ↗
20. M. Ardeljan, M. Knezevic, T. Nizolek, I.J. Beyerlein, N.A. Mara, and T.M. Pollock: Int. J. Plast., 2015, vol. 74, pp. 35–57.10.1016/j.ijplas.2015.06.003 ↗
21. X. He and Y. Shen: JOM, 2015, vol. 67, pp. 1486–90.10.1007/s11837-015-1419-3 ↗
22. J.S. Carpenter, S.C. Vogel, J.E. LeDonne, D.L. Hammon, I.J. Beyerlein, and N.A. Mara: Acta Mater., 2012, vol. 60, pp. 1576–86.10.1016/j.actamat.2011.11.045 ↗
23. L.F. Zeng, R. Gao, Z.M. Xie, S. Miao, Q.F. Fang, X.P. Wang, T. Zhang, and C.S. Liu: Sci. Rep., 2017, vol. 7, p. 40742.10.1038/srep40742 ↗
24. L.F. Zeng, R. Gao, Q.F. Fang, X.P. Wang, Z.M. Xie, S. Miao, T. Hao, and T. Zhang: Acta Mater., 2016, vol. 110, pp. 341–51.10.1016/j.actamat.2016.03.034 ↗
25. J.S. Carpenter, T. Nizolek, R.J. McCabe, M. Knezevic, S.J. Zheng, B.P. Eftink, J.E. Scott, S.C. Vogel, T.M. Pollock, N.A. Mara, and I.J. Beyerlein: Acta Mater., 2015, vol. 92, pp. 97–108.10.1016/j.actamat.2015.03.020 ↗
26. M.M. Mahdavian, L. Ghalandari, and M. Reihanian: Mater. Sci. Eng. A, 2013, vol. 579, pp. 99–107.10.1016/j.msea.2013.05.002 ↗
27. Y.F. Sun, N. Tsuji, H. Fujii, and F.S. Li: J. Alloys Compd., 2010, vol. 504, pp. S443-47.10.1016/j.jallcom.2010.02.201 ↗
28. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
29. International Molybdenum Association: Practical Guidelines for the Fabrication of Duplex Stainless Steels, International Molybdenum Association, London, 2009.
30. J. Hay, Appl. Note, pp. 1–4.
31. J. Ryś and A. Zielińska-Lipiec: Int. J. Mater. Res., 2015, vol. 106, pp. 771–81.10.3139/146.111242 ↗
32. R. Shashanka and D. Chaira: Powder Technol., 2014, vol. 259, pp. 125–36.10.1016/j.powtec.2014.03.061 ↗
33. R. Shashanka and D. Chaira: Mater. Charact., 2015, vol. 99, pp. 220–29.10.1016/j.matchar.2014.11.030 ↗
34. J. Keichel, J. Foct, and G. Gottstein: ISIJ Int., 2003, vol. 43, pp. 1781–87.10.2355/isijinternational.43.1781 ↗
35. J. Ryś and M. Witkowska: Arch. Metall. Mater., 2010, vol. 55, pp. 733–47.
36. J. Ryś and A. Zielińska-Lipiec: Arch. Metall. Mater., 2012, vol. 57, pp. 1041–53.10.2478/v10172-012-0116-2 ↗
37. J. Hamada and N. Ono: Mater. Trans., 2010, vol. 51, pp. 644–51.10.2320/matertrans.MG200908 ↗
38. M. Breda, K. Brunelli, F. Grazzi, A. Scherillo, and I. Calliari: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 577–86.10.1007/s11661-014-2646-x ↗
39. N. Akdut and J. Foct: ISIJ Int., 1996, vol. 36, pp. 883–92.10.2355/isijinternational.36.883 ↗
40. J.L. Lv, T.X. Liang, C. Wang, and L.M. Dong: Mater. Sci. Eng. C, 2016, vol. 62, pp. 558–63.10.1016/j.msec.2016.02.008 ↗
41. H.R. Wenk, L. Lutterotti, and S.C. Vogel: Nucl. Instrum. Methods Phys. Res. A, 2003, vol. 515, pp. 575–88.10.1016/j.nima.2003.05.001 ↗
42. S.C. Vogel, C. Hartig, L. Lutterotti, R.B. Von Dreele, H.R. Wenk, and D.J. Williams: Powder Diffr., 2004, vol. 19, pp. 65–68.10.1154/1.1649961 ↗
43. L. Lutterotti, S. Matthies, H.R. Wenk, A.S. Schultz, and J.W. Richardson: J. Appl. Phys., 1997, vol. 81, pp. 594–600.10.1063/1.364220 ↗
44. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024–37.10.1107/S0021889808030112 ↗
45. N.C. Popa: J. Appl. Crystallogr., 1998, vol. 31, pp. 176–80.10.1107/S0021889897009795 ↗
46. ASTM: Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM Standard A370–21, American Society for Testing and Materials, West Conshohocken, 2021.
47. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, p. 63.10.4028/www.scientific.net/SSP.160.63 ↗
48. J. Ryś and G. Cempura: Mater. Sci. Eng. A, 2017, vol. 700, pp. 656–66.10.1016/j.msea.2017.06.022 ↗
49. K. Zhang IV., A.R.K. Alexandrov, R.Z. Valiev, and K. Lu: J. Phys. D, 1997, vol. 30, p. 3008.10.1088/0022-3727/30/21/015 ↗
50. S.S.M. Tavares, M.R. da Silva, J.M. Pardal, H.F.G. Abreu, and A.M. Gomes: J. Mater. Process. Technol., 2006, vol. 180, pp. 318–22.10.1016/j.jmatprotec.2006.07.008 ↗
51. J. Capek, M. Cernik, N. Ganev, K. Trojan, J. Nemecek, and K. Kolarik: IOP Conf. Ser. Mater. Sci. Eng., 2018, vol. 375, p. 012025.10.1088/1757-899X/375/1/012025 ↗
52. J.S. Carpenter, R.J. McCabe, J.R. Mayeur, N.A. Mara, and I.J. Beyerlein: Adv. Eng. Mater., 2015, vol. 17, pp. 109–14.10.1002/adem.201400210 ↗
53. S.J. Zheng, J.S. Carpenter, R.J. McCabe, I.J. Beyerlein, and N.A. Mara: Sci. Rep., 2014, vol. 4, p. 4226.10.1038/srep04226 ↗
54. D. Raabe: Acta Mater., 1997, vol. 45, pp. 1137–51.10.1016/S1359-6454(96)00222-4 ↗
55. G. Krauss: Steels: Processing, Structure, and Performance, 4th ed. ASM International, Materials Park, 2005.
56. R.J. McCabe, I.J. Beyerlein, J.S. Carpenter, and N.A. Mara: Nat. Commun., 2014, vol. 5, p. 3806.10.1038/ncomms4806 ↗
57. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
58. C.B. Finfrock, D. Bhattacharya, B.N.L. McBride, T.J. Ballard, A.J. Clarke, and K.D. Clarke: JOM, 2022, vol. 74, pp. 506–12.10.1007/s11837-021-05039-5 ↗
59. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1983, vol. 13, pp. 627–35.10.1007/BF02644428 ↗
60. J. Talonen, H. Hanninen, P. Nenonen, and G. Pape: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 421–32.10.1007/s11661-005-0313-y ↗
61. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13, pp. 619–26.10.1007/BF02644427 ↗
62. A.M. Beese and D. Mohr: Acta Mater., 2011, vol. 59, pp. 2589–2600.10.1016/j.actamat.2010.12.040 ↗
63. T. Inoue: in Strain Variations on Rolling Condition in Accumulative Roll-Bonding by Finite Element Analysis. D. Moratal, ed., IntechOpen, London, 2010. https://doi.org/10.5772/10233.10.5772/10233 ↗
64. G. Sun, L. Du, J. Hu, and B. Zhang: Mater. Charact., 2020, vol. 159, p. 110073.10.1016/j.matchar.2019.110073 ↗
65. G. Gianini Braga Maria, D. Gomes Rodrigues, E. Tadeu Fraga Freitas, and D. Brandao Snatos: Mater. Lett., 2019, vol. 234, p. 283.10.1016/j.matlet.2018.09.104 ↗
66. J.S. Carpenter, R.J. McCabe, S.J. Zheng, T.A. Wynn, N.A. Mara, and I.J. Beyerlein: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2192–2208.10.1007/s11661-013-2162-4 ↗
67. M. Ma, H. Ding, Y. Huang, C.W. Tian, and T.G. Langdon: Crystals, 2020, vol. 10, p. 1138.10.3390/cryst10121138 ↗
68. G.K. Williamson and R.E. Smallman: Philos. Mag., 1956, vol. 1, pp. 34–46.10.1080/14786435608238074 ↗