Structural Characterization of Binary Al-Cu Alloy Processed by Equal Channel Angular Pressing at Half of the Melting Point
Source abstract
Abstract
Microstructure evolution in Al-3 wt pct Cu alloy during equal-channel angular pressing (ECAP) at 423 K (150 °C) (~ 0.5 Tm) was studied. The processing temperature roughly corresponded to the transition point from cold to hot deformation associated with preferred formation of either cellular/deformation band structures, or more equilibrium subgrain structure, respectively. Similar to cold deformation, the main feature of warm ECAP at e = 1–2 was development of dislocation structures consisting of cell/microshear bands and larger-scale deformation bands, leading to grain fragmentation. With further straining, the cell bands gradually transformed into subgrain structure, and the microshear bands became the main sources of grain refinement. New ultrafine grains were formed due to mutual crossing of microshear bands, followed by increase in their number and misorientation. Simultaneously, coarsening of Θ(Al2Cu)-phase precipitates, the average size of which increased from 15 to 35 nm, facilitated dislocation rearrangement. As a result, an inhomogeneous structure with a fraction of high-angle boundaries of about 0.5, consisting of arrays of new grains about 1.2 μm in size and fragments of original grains, was formed at e = 8. It was concluded that grain refinement occurred mainly due to continuous dynamic recrystallization.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
2. K. Edalati, A. Bachmaier, V.A. Beloshenko, Y. Beygelzimer, V.D. Blank, W.J. Botta, K. Bryła, J. Čížek, S. Divinski, N.A. Enikeev, Y. Estrin, G. Faraji, R.B. Figueiredo, M. Fuji, T. Furuta, T. Grosdidier, J. Gubicza, A. Hohenwarter, Z. Horita, J. Huot, Y. Ikoma, M. Janeček, M. Kawasaki, P. Král, S. Kuramoto, T.G. Langdon, D.R. Leiva, V.I. Levitas, A. Mazilkin, M. Mito, H. Miyamoto, T. Nishizaki, R. Pippan, V.V. Popov, E.N. Popova, G. Purcek, O. Renk, Á. Révész, X. Sauvage, V. Sklenicka, W. Skrotzki, B.B. Straumal, S. Suwas, L.S. Toth, N. Tsuji, R.Z. Valiev, G. Wilde, M.J. Zehetbauer, and X. Zhu: Mater. Res. Lett., 2022, vol. 10, pp. 163–256.10.1080/21663831.2022.2029779 ↗
3. R.R. Mulyukov, R.M. Imayev, A.A. Nazarov, M.F. Imayev, V.M. Imayev: Superplasticity of Ultrafine Grained Alloys: Experiment, Theory, Technologies, Nauka, Moscow, 2014, p. 284 (in Russian).
4. M.V. Markushev: Lett. Mater., 2011, vol. 11, pp. 36–42. (in Russian).10.22226/2410-3535-2011-1-36-42 ↗
5. V. Segal: Materials, 2018, vol. 11, p. 1175.10.3390/ma11071175 ↗
6. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
7. M. Baig, A.H. Seikh, A.U. Rehman, J.A. Mohammed, F.H. Hashmi, and S.M. Ragab: Crystals, 2021, vol. 11, p. 862.10.3390/cryst11080862 ↗
8. A. Yamashita, D. Yamaguchi, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2000, vol. 287, pp. 100–06.10.1016/S0921-5093(00)00836-4 ↗
9. E. Avtokratova, O. Sitdikov, O. Mukhametdinova, M. Markushev, S.V.S.N. Murty, M.J.N.V. Prasad, and B.P. Kashyap: J Alloys Compd., 2016, vol. 673, pp. 182–94.10.1016/j.jallcom.2016.02.207 ↗
10. O. Sitdikov: Inorg. Mater. Appl. Res., 2016, vol. 7, pp. 149–57.10.1134/S2075113316020210 ↗
11. P.J. Apps, M. Berta, and P.B. Prangnell: Acta Mater., 2005, vol. 53, pp. 499–511.10.1016/j.actamat.2004.09.042 ↗
12. J.C. Werenskiold and H.J. Roven: Mater. Sci. Eng. A., 2005, vol. 410–411, pp. 174–77.10.1016/j.msea.2005.08.049 ↗
13. M. Popovic and B. Verlinden: Mater. Sci. Tech., 2005, vol. 21, pp. 606–12.10.1179/174328405X38320 ↗
14. E. Avtokratova, O. Sitdikov, O. Latypova, and M. Markushev: Facta Universitatis, Ser: Mechan. Eng., 2020, vol. 18(2), pp. 255–67.
15. J.M. Garcia-Infanta, S. Swaminathan, A.P. Zhilyaev, F. Carreno, O.A. Ruano, and T.R. McNelley: Mater. Sci. Eng. A., 2008, vol. 485, pp. 160–75.10.1016/j.msea.2007.07.080 ↗
16. I. Mazurina, T. Sakai, H. Miura, O. Sitdikov, and R. Kaibyshev: Mater. Sci. Eng. A., 2008, vol. 473, pp. 297–305.10.1016/j.msea.2007.04.112 ↗
17. I.J. Beyerlein and L.S. Tóth: Prog. Mater. Sci., 2009, vol. 54, pp. 427–510.10.1016/j.pmatsci.2009.01.001 ↗
18. OSh. Sitdikov, E.V. Avtokratova, and R.I. Babicheva: Phys. Met. Metallogr., 2010, vol. 110, pp. 153–61.10.1134/S0031918X10080053 ↗
19. O. Sitdikov, E. Avtokratova, and T. Sakai: J Alloys Compd., 2015, vol. 648, pp. 195–204.10.1016/j.jallcom.2015.06.029 ↗
20. X. Zeng, X.G. Fan, H.W. Li, M. Zhan, S.H. Li, T.W. Ren, and K.Q. Wu: Mater. Sci. Eng. A., 2020, vol. 794, 139905.10.1016/j.msea.2020.139905 ↗
21. O. Sitdikov, E. Avtokratova, T. Sakai, and K. Tsuzaki: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 1087–1100.10.1007/s11661-012-1438-4 ↗
22. M. Gazizov, S. Malopheyev, and R. Kaibyshev: J Mater. Sci., 2014, vol. 50, pp. 990–1005.10.1007/s10853-014-8659-4 ↗
23. T. Sakai, A. Belyakov, and H. Miura: Metall. Mater. Trans. A., 2008, vol. 39A, pp. 2206–14.10.1007/s11661-008-9556-8 ↗
24. C. Kobayashi, T. Sakai, A. Belyakov, and H. Miura: Philos. Mag. Lett., 2007, vol. 8, pp. 751–66.10.1080/09500830701566016 ↗
25. I. Mazurina, T. Sakai, H. Miura, O. Sitdikov, and R. Kaibyshev: Mater. Trans., 2009, vol. 50, pp. 101–10.10.2320/matertrans.MD200807 ↗
26. A. Duckham, R.D. Knutsen, and O. Engler: Acta Mater., 2001, vol. 49, pp. 2739–49.10.1016/S1359-6454(01)00166-5 ↗
27. F.J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd edn., Elsevier; 2004, p. 658.10.1016/B978-008044164-1/50016-5 ↗
28. J. Lv, J.-H. Zheng, V.A. Yardley, Zh. Shi, and J. Lin: Metals, 2020, vol. 10, p. 1516.10.3390/met10111516 ↗
29. U. Chakkingal and R.F. Thomson: J Mater. Process. Technol., 2001, vol. 117, pp. 169–77.10.1016/S0924-0136(01)01102-5 ↗
30. Y.Y. Wang, P.L. Sun, P.W. Kao, and C.P. Chang: Scripta Mater., 2004, vol. 50, pp. 613–17.10.1016/j.scriptamat.2003.11.027 ↗
31. I. Mazurina, T. Sakai, H. Miura, O. Sitdikov, and R. Kaibyshev: Mater. Sci. Eng. A., 2008, vol. 486, pp. 662–71.10.1016/j.msea.2007.09.070 ↗
32. C. Pithan, T. Hashimoto, M. Kawazoe, J. Nagahora, and K. Higashi: Mater. Sci. Eng. A., 2000, vol. 280, pp. 62–68.10.1016/S0921-5093(99)00657-7 ↗
33. O. Sitdikov, T. Sakai, H. Miura, and C. Hama: Mater. Sci. Eng. A., 2009, vol. 516, pp. 180–88.10.1016/j.msea.2009.03.037 ↗
34. A. Goloborodko, O. Sitdikov, R. Kaibyshev, H. Miura, and T. Sakai: Mater. Sci. Eng. A., 2004, vol. 381, pp. 121–28.10.1016/j.msea.2004.04.049 ↗
35. O. Sitdikov, R. Garipova, E. Avtokratova, O. Mukhametdinova, and M. Markushev: J. Alloys Compd., 2018, vol. 746, pp. 520–31.10.1016/j.jallcom.2018.02.277 ↗
36. O. Sitdikov: Fizicheskaya Mezomekhanika, 2017, vol. 20, pp. 95–109. (in Russian).
37. J. Zhao, Y. Deng, and J. Tang: J. Mater. Eng. Perform., 2020, vol. 29, pp. 1715–23.10.1007/s11665-020-04672-6 ↗
38. O.S. Sitdikov, E.V. Avtokratova, B.I. Atanov, and M.V. Markushev: Inorg. Mater., 2022, vol. 58, pp. 544–54.10.1134/S0020168522050107 ↗
39. P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Trans. A., 1999, vol. 30, pp. 1989–97.10.1007/s11661-999-0009-9 ↗
40. Y. Huang and P.B. Prangnell: J Mater. Sci., 2008, vol. 43, pp. 7273–79.10.1007/s10853-008-2623-0 ↗
41. I. Mohamed: Mater. Sci. Eng. A., 2011, vol. 528, pp. 6946–57.10.1016/j.msea.2010.10.048 ↗
42. S. Subbarayan, H.J. Roven, Y.J. Chen, and P.C. Skaret: Int. J. Mater. Res., 2013, vol. 104, pp. 630–36.10.3139/146.110908 ↗
43. M. Zha, Y. Li, R.H. Mathiesen, R. Bjørge, and H.J. Roven: Acta Mater., 2015, vol. 84, pp. 42–44.10.1016/j.actamat.2014.10.025 ↗
44. Y. Huang: Metals, 2016, vol. 6, p. 158.10.3390/met6070158 ↗
45. Zh. Yanushkevich, A. Belyakov, and R. Kaibyshev: Acta Mater., 2015, vol. 82, pp. 244–54.10.1016/j.actamat.2014.09.023 ↗
46. R. Gholizadeh, D. Terada, A. Shibata, and N. Tsuji: Nano Materials Sci., 2020, vol. 2, pp. 83–85.10.1016/j.nanoms.2020.03.005 ↗
47. J.W. Signorelli, E.A. Vieira, P.A. Turner, M. Ferrante, and R.E. Bolmaro: Revista Matéria, 2005, vol. 10, pp. 120–34.
48. A. Gholinia, P.B. Prangnell, and M.V. Markushev: Acta Mater., 2000, vol. 48, pp. 1115–30.10.1016/S1359-6454(99)00388-2 ↗
49. Channel 5, User Manual, O. Instruments HKL 2007; https://aarc.ua.edu/wp-content/uploads/docs/JEOL-7000F-Oxford_Channel_5_User_Manual.pdf
50. ISO Standard 13067, Microbeam Analysis - Electron Backscatter Diffraction - Measurement of Average Grain Size, 2011
51. P.B. Hirsch, A. Howie, R.B. Nicholson, D.W. Pashley, and M.J. Whelan: Electron Microscopy of Thin Crystals, Butter Worths, London, 1965, p. 549.
52. J. Wang, S.-B. Kang, and H.-W. Kim: Mater. Sci. Eng. A, 2004, vol. 383, pp. 356–61.10.1016/j.msea.2004.05.030 ↗
53. P.J. Hurley and F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 1087–1102.10.1016/S1359-6454(02)00513-X ↗
54. D. Kuhlmann-Wilsdorf: Acta Mater., 1999, vol. 47, pp. 1697–1712.10.1016/S1359-6454(98)00413-3 ↗
55. Q. Zhu and C. Sellars: Scripta Mater., 2001, vol. 45, pp. 41–48.10.1016/S1359-6462(01)00989-7 ↗
56. A. Gutierrez-Urrutia, et al.: Acta Mater., 2022, vol. 233, 117980.10.1016/j.actamat.2022.117980 ↗
57. J. Liu, Q. Zhang, Z. Chen, L. Wang, G. Ji, Q. Shi, Y. Wu, F. Zhang, and H. Wang: Mater. Sci. Eng. A, 2021, vol. 805, 140614.10.1016/j.msea.2020.140614 ↗
58. O. Sitdikov, A. Goloborodko, T. Sakai, H. Miura, and R. Kaibyshev: Mater. Sci. Forum, 2003, vol. 426–432, pp. 381–86.10.4028/www.scientific.net/MSF.426-432.381 ↗
59. G.H. Akbari, C.M. Sellars, and J.A. Whiteman: Acta Mater., 1997, vol. 45, pp. 5047–5058.10.1016/S1359-6454(97)00170-5 ↗
60. Y. Watanabe, P.D. Sequeira, O. Sitdikov, H. Sato, Z.G. Zhang, and I.S. Kim: Mater. Sci. Forum, 2007, vol. 561–565, pp. 251–54.10.4028/www.scientific.net/MSF.561-565.251 ↗
61. M. Kahlweit: Advances in Colloid and Interface Sci., 1975, vol. 5, pp. 1–35.10.1016/0001-8686(75)85001-9 ↗
62. A. Russell and K.L. Lee: Structure - Property Relations in Nonferrous Metals, Wiley, New York, 2005, p. 440.10.1002/0471708542 ↗