Enhancement of the Mechanical Properties of a V–Ti–N Microalloyed Steel Treated by a Novel Precipitation-Quenching & Partitioning Process
Source abstract
Abstract
In this study, a novel precipitation-quenching & partitioning (P-Q&P) process was proposed by combining a proper intermediate holding treatment with the Q&P process, which successfully increased the strength of a V–Ti–N microalloyed steel without sacrificing the plasticity. However, the impact toughness of the P-Q&P samples is lower than that of the Q&P sample. Compared to the Q&P sample, the P-Q&P samples have more retained austenite. In addition, coarser substructures of martensite and bainite were formed in the P-Q&P samples. All the P-Q&P and Q&P samples contain two types of carbonitrides, which are the large-size particles (enriched in Ti) formed or undissolved in austenite and the small-size particles (enriched in V) formed in martensite and bainite. The P-Q&P samples have a smaller size and larger volume fraction of the large-size particles than the Q&P sample. The increase in the strength of the P-Q&P samples is attributed to the precipitation strengthening of the carbonitrides formed in austenite during the intermediate holding treatment. And the maintained elongation is mainly caused by the higher austenite content in the P-Q&P samples. The poor toughness of the P-Q&P samples is mainly resulted from the coarser substructures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A, 2006, vol. 438, pp. 25–34.10.1016/j.msea.2006.02.133 ↗
2. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
3. W.C. Leslie and G.C. Rauch: Metall. Trans. A, 1978, vol. 9(3), pp. 343–49.10.1007/BF02646383 ↗
4. G. Miyamoto, J. Oh, K. Hono, T. Furuhara, and T. Maki: Acta Mater., 2007, vol. 55, pp. 5027–38.10.1016/j.actamat.2007.05.023 ↗
5. G.M. Michal and J.A. Slane: Metall. Mater. Trans. A, 1986, vol. 17A(8), pp. 1287–94.10.1007/BF02650109 ↗
6. A.S. Keh and W.C. Leslie: Recent Observations on Quench-Aging and Strain-Aging of Iron and Steel, Springer, Boston, 1963, pp. 208–50.
7. X. Huang, W. Liu, Y. Huang, H. Chen, and W. Huang: J. Mater. Process. Tech., 2015, vol. 222, pp. 181–87.10.1016/j.jmatprotec.2015.03.010 ↗
8. H.Y. Li, X.W. Lu, X.C. Wu, Y.A. Min, and X.J. Jin: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6255–59.10.1016/j.msea.2010.06.045 ↗
9. F. HajyAkbary, J. Sietsma, G. Miyamoto, T. Furuhara, and M.J. Santofimia: Acta Mater., 2016, vol. 104, pp. 72–83.10.1016/j.actamat.2015.11.032 ↗
10. T.Y. Hsu and Z.Y. Xu: Mater. Sci. Forum, 2007, vol. 561–565, pp. 2283–86.10.4028/www.scientific.net/MSF.561-565.2283 ↗
11. N. Zhong, X.D. Wang, L. Wang, and Y.H. Rong: Mater. Sci. Eng. A, 2009, vol. 506, pp. 111–16.10.1016/j.msea.2008.11.014 ↗
12. X.D. Wang, N. Zhong, Y.H. Rong, T.Y. Hsu, and L. Wang: J. Mater. Res., 2011, vol. 24, pp. 260–67.10.1557/JMR.2009.0029 ↗
13. J. Sun, S.T. Wei, and F.Y. Lu: Mater. Sci. Eng. A, 2020, vol. 772, p. 138739.1–38739.10.10.1016/j.msea.2019.138739 ↗
14. Z.J. Zhang, J.S. Zhang, Y. Lian, M.Y. Ma, C. Zhao, H.Y. Ye, G.J. Li, C. Zhang, and J.F. Huang: Mater. Sci. Eng. A, 2021, vol. 813, p. 141091.10.1016/j.msea.2021.141091 ↗
15. J.K. Ren, Q.Y. Chen, J. Chen, and Z.Y. Liu: Mater. Sci. Eng. A, 2021, vol. 811, p. 141063.10.1016/j.msea.2021.141063 ↗
16. R. Lagneborg, B. Hutchinson, T. Siwecki, and S. Zajac: The ls, Blackwell, Oxford, 2014, pp. 3–13.
17. A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, and E. De Moor: Acta Mater., 2008, vol. 56, pp. 16–22.10.1016/j.actamat.2007.08.051 ↗
18. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Maney Publishing, London, 1997, pp. 23–36.
19. H.J. Kestenbach and J. Gallego: Scr. Mater., 2001, vol. 44(5), pp. 791–96.10.1016/S1359-6462(00)00660-6 ↗
20. A. Itman, K.R. Cardoso, and H.J. Kestenbach: Mater. Sci. Tech., 1997, vol. 13(1), pp. 49–55.10.1179/mst.1997.13.1.49 ↗
21. X.L. Pan and M. Umemoto: Acta Metall. Sin-Engl., 2018, vol. 31(11), pp. 1197–1206.10.1007/s40195-018-0775-8 ↗
22. S. Zajac: Precipitation and Grain Refinement in Vanadium–Containing Steels, Vanitec Ltd., England, 2001, pp. 1–20.
23. G. Yang, X. Sun, Z. Li, X. Li, and Q. Yong: Mater. Des., 2013, vol. 50, pp. 102–07.10.1016/j.matdes.2013.03.019 ↗
24. S. Nafisi, B.S. Amirkhiz, F. Fazeli, M. Arafin, R. Glodowski, and L. Collins: ISIJ Int., 2016, vol. 56, pp. 154–60.10.2355/isijinternational.ISIJINT-2015-290 ↗
25. Q. Zhou, Z. Li, Z.S. Wei, D. Wu, J.Y. Li, and Z.Y. Shao: J. Iron Steel Res. Int., 2019, vol. 26, pp. 102–11.10.1007/s42243-018-0215-z ↗
26. K.J. Irvine, F.B. Pickering, and T. Gladman: J. Iron Steel Inst., 1967, vol. 205, pp. 161–82.
27. W. Yan, Y.Y. Shan, and K. Yang: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2147–2158.10.1007/BF02586135 ↗
28. K. Narita and S. Koyama: Tetsu to Hagane, 1966, vol. 52, pp. 788–91.10.2355/tetsutohagane1955.52.7_1098 ↗
29. J.G. Speer, J.R. Michael, and S.S. Hansen: Metall. Trans. A, 1987, vol. 18A, pp. 211–22.10.1007/BF02825702 ↗
30. B.H. Toby: J. Appl. Crystallogr., 2001, vol. 34, pp. 210–13.10.1107/S0021889801002242 ↗
31. J.Y. Kang, S.J. Park, and M.B. Moon: Microsc. Microanal., 2013, vol. 19, pp. 13–16.10.1017/S1431927613012233 ↗
32. M.S. Baek, K.S. Kim, T.W. Park, J. Ham, and K.A. Lee: Mater. Sci. Eng. A, 2020, vol. 785, p. 139375.10.1016/j.msea.2020.139375 ↗
33. T. Maitland and S. Sitzman: Electron Backscatter Diffraction (EBSD) Technique and Materials Characterization Examples, Springer, Florida, 2007, pp. 52–61.
34. G. Gao, H. Zhang, X. Gui, P. Luo, Z. Tan, and B. Bai: Acta Mater., 2014, vol. 76, pp. 425–33.10.1016/j.actamat.2014.05.055 ↗
35. J.K. Mackenzie and J.S. Bowles: Acta Metall., 1957, vol. 5, pp. 137–49.10.1016/0001-6160(57)90018-4 ↗
36. J.L. Mccall, and J.E. Body: Quantitative Metallography of Dispersion-Strengthened Alloys from Extraction Replicas: Volume Fraction and Interpartial Spacing, Battelle Memorial Inst., Ohio, 1968, pp. 76–112.
37. G.J. Shiflet, J.R. Bradley, and H.I. Aaronson: Metall. Trans. A, 1978, vol. 9, pp. 999–1008.10.1007/BF02649845 ↗
38. T.Y. Hsu: J. Mater. Sci., 1985, vol. 20, pp. 23–31.10.1007/BF00555894 ↗
39. M.B. Edward and S.A. George: Metall. Trans., 1970, vol. 1, pp. 1513–20.10.1007/BF02641994 ↗
40. K. Ishida: Scr. Metall., 1977, vol. 11, pp. 237–42.10.1016/0036-9748(77)90061-8 ↗
41. T. Siwecki, A. Sandberg, and W. Roberts: Processing Characteristics and Properties of Ti-V-N Steels, Vanitec Ltd., England, 1983, pp. 619–34.
42. W. Roberts: Recent Innovations in Alloy Design and Processing of Microalloyed Steels, Vanitec Ltd., England, 1983, pp. 33–66.
43. M. Prikryl, A. Kroupa, G.C. Weatherly, and S.V. Subramanian: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1149–1165.10.1007/BF02649854 ↗
44. Q.L. Yong: Secondary Phases in Steels, Metallurgical Industry Press, Beijing, 2006, pp. 47–52.
45. A.D. Batte and R.W.K. Honeycombe: Metal Sci. J., 1973, vol. 7, pp. 160–68.10.1179/030634573790445370 ↗
46. T. Gladman: Mater. Sci. Tech., 1999, vol. 15, pp. 30–36.10.1179/026708399773002782 ↗
47. M. Soleimani, A. Kalhor, and H. Mirzadeh: Mater. Sci. Eng. A, 2020, vol. 795, 140023.10.1016/j.msea.2020.140023 ↗
48. S. Li, G. Zhu, and Y. Kang: J. Alloy. Compd., 2016, vol. 675, pp. 104–15.10.1016/j.jallcom.2016.03.100 ↗
49. T. Swarr and G. Krauss: Metall. Trans. A, 1976, vol. 7, pp. 41–48.10.1007/BF02644037 ↗
50. C.F. Wang, M.Q. Wang, J. Shi, W.J. Hui, and H. Dong: J. Mater. Sci. Tech., 2007, vol. 23, pp. 659–64.
51. R.K. Ray and J.J. Jonas: Int. Mater. Rev., 1990, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗
52. H.R. Wenk and P.V. Houtte: Texture and Anisotropy, IOP Publishing Ltd, 2004, pp. 1367–1428.10.1088/0034-4885/67/8/R02 ↗
53. H. Inagaki, K. Kurihara, and I. Kozasu: Trans. Iron Steel Inst. Japan, 1977, vol. 17, pp. 75–81.10.2355/isijinternational1966.17.75 ↗