Choosing an Optimal Austenitization Submodel Using Bayesian Model Selection
Source abstract
Abstract
Ultra-high strength steel (UHSS) alloys such as aluminized 22MnB5 are used to produce automotive parts through hot stamping. A thermometallurgical model that predicts the blank-heating profile and austenitization inside a roller hearth furnace is needed to maximize process efficiency while ensuring that the blanks are completely austenitized. Three competing austenitization kinetics models: a Johnson–Mehl–Avrami–Kohnogorov (JMAK) type model, an internal state variable (ISV) model, and a phenomenological model, are evaluated as candidate metallurgical submodels, using dilatometry data and Bayesian model selection. This technique has the capability of quantitatively assessing the trade-off between accuracy and complexity. The ISV model is recommended by the Bayesian model selection technique.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. H. Karbasian and A. Tekkaya: J. Mater. Process. Technol., 2010, vol. 210(15), pp. 2103–18.10.1016/j.jmatprotec.2010.07.019 ↗
2. H.S. Ganesh, T.F. Edgar, and M. Baldea: J. Process Control, 2019, vol. 74, pp. 177–88.10.1016/j.jprocont.2017.09.008 ↗
3. F. Caballero, C. Capdevila, and C. García de Andrés: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1283–91.10.1007/s11661-001-0218-3 ↗
4. M. Verma, H. Yan, J. Culham, M. Di Ciano, K. Daun and M. Verma: J. Heat Transf., vol. 141, no. 6, p. 10, 2019.10.1115/1.4042904 ↗
5. M. Di Ciano, N. Field, M. Wells and K. Daun: J. Mater. Eng. Perform, vol. 27, no. 4, p. 1792, 2018.10.1007/s11665-018-3262-5 ↗
6. X. Luo, L. Han and J. Gu: Metals, vol. 6, no. 1, p. 8, 2015.10.3390/met6010008 ↗
7. B. Zhao, C. Chiriac and K. J. Daun: 2020 IOP Conf. Ser., vol. 967, p. 012076.10.1088/1757-899X/967/1/012076 ↗
8. H. Huang, B. Wang, X. Tang, and J. Li: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5799–5804.10.1007/s11661-017-4368-3 ↗
9. N. Li, J. Lin, D. Balint, and T. Dean: J. Mater. Process. Technol., 2016, vol. 237, pp. 394–401.10.1016/j.jmatprotec.2016.06.006 ↗
10. H. Yan, M. Di Ciano, M. Verma and K. Daun: International Deep Drawing Research Group 37th Annual Conference, Waterloo, ON, Canada, 2018, June 3-7.
11. A.D. Rollet, M.J. Luton, and D.J. Srolovitz: Acta Metall. Mater., 1992, vol. 40, pp. 43–55.10.1016/0956-7151(92)90198-N ↗
12. A. Jacot and M. Rappaz: Acta. Mater., 1999, vol. 47(5), pp. 1645–51.10.1016/S1359-6454(99)00005-1 ↗
13. F. Chen, Z. Cui, J. Liu, W. Chen, and S. Chen: Mater. Sci. Eng. A, 2010, vol. 527(21–22), pp. 5539–49.10.1016/j.msea.2010.05.021 ↗
14. B.J. Yang, A. Hattiangadi, W.Z. Li, G.F. Zhou, and T.E. McGreevy: Mater. Sci. Eng. A, 2010, vol. 527(12), pp. 2978–84.10.1016/j.msea.2010.01.038 ↗
15. B. Zhu, Y. Zhang, C. Wang, P.X. Liu, W.K. Liang, and J. Li: Mater. Trans. A, 2014, vol. 45A, pp. 3161–71.10.1007/s11661-014-2255-8 ↗
16. R. Dutta, M. Bogdan and J. k. Ghosh: JISA, vol. 50, pp. 105-142, 2012.
17. M.B. Hooten and N.T. Hobbs: Ecol. Monogr., 2015, vol. 85(1), pp. 3–28.10.1890/14-0661.1 ↗
18. J.S. Mitchell and D.L. Rabosky: Methods Ecol. Evol., 2016, vol. 8(1), pp. 37–46.10.1111/2041-210X.12626 ↗
19. S.H. Cheung, T.A. Oliver, E.E. Prudencio, S. Prudhomme, and R.D. Moser: Reliab. Eng. Syst. Saf., 2011, vol. 96(9), pp. 1137–49.10.1016/j.ress.2010.09.013 ↗
20. Y. Jin, Z. Yin, W. Zhou, and J. Shao: Int. J. Numer. Anal. Methods Geomech., 2019, vol. 43(14), pp. 2305–27.10.1002/nag.2979 ↗
21. C. Mark, C. Metzner, L. Lautscham, P.L. Strissel, R. Strick, and B. Fabry: Nat. Commun., 2018, vol. 9, p. 1803.10.1038/s41467-018-04241-5 ↗
22. T. A. Sipkens, P. J. Hadwin, S. J. Grauer and K. J. Daun: J. Appl. Phys., no. 123, p. 095103, 2018.10.1063/1.5016341 ↗
23. W. A. Johnson and R. F. Mehl: Trans. Am. Inst. Min. (Metall.) Engs., vol. 135, p. 416, 1939.
24. M. Avrami: J. Chem. Phys., 1939, vol. 7(12), pp. 1103–12.10.1063/1.1750380 ↗
25. K.J. Laidler: J. Chem. Educ., 1984, vol. 61, pp. 494–98.10.1021/ed061p494 ↗
26. D.W. Henderson: J. Non-Cryst. Solids., 1979, vol. 30(3), pp. 301–15.10.1016/0022-3093(79)90169-8 ↗
27. Ø. Grong and H.R. Shercliff: Prog. Mater. Sci., 2006, vol. 47, pp. 163–282.10.1016/S0079-6425(00)00004-9 ↗
28. J. Cai, phd Thesis, Imperial College London, England, 2011.
29. C. Chiriac and R. Sohmshetty: in CHS2, 2017.10.1515/jim-2017-0004 ↗
30. A. Roósz, Z. Gácsi, and E.G. Fuchs: Acta Metall., 1983, vol. 31(4), pp. 509–17.10.1016/0001-6160(83)90039-1 ↗
31. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Mater. Trans. A, 1981, vol. 12A, pp. 1419–28.10.1007/BF02643686 ↗
32. "Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count," ASTM E562 - 11. (n.d.).
33. J. Huang, W. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3364–75.
34. E.T. Jaynes: IEEE Trans. Cybern., 1968, vol. 4(3), pp. 227–41.10.1109/TSSC.1968.300117 ↗
35. U. Von Toussaint: Rev. Mod. Phys., 2011, vol. 83, pp. 943–99.10.1103/RevModPhys.83.943 ↗
36. R.E. Kass and A.E. Raftery: JASA, 1995, vol. 90(430), pp. 773–95.10.1080/01621459.1995.10476572 ↗
37. S.J. Grauer, P.J. Hadwin, T.A. Sipkens, and K.J. Daun: Opt. Express, 2017, vol. 25(21), pp. 25135–48.10.1364/OE.25.025135 ↗