X-ray-based measurement of composition during electron beam melting of AISI 316 stainless steel: Part II. Evaporative processes and simulation
Source abstract
Abstract
An energy dispersive X-ray (EDX) detector mounted on a laboratory scale electron beam furnace (30 kW) was employed to assess the potential use of X-rays as a means of on-line composition monitoring during electron beam (E B) melting of alloys. The design and construction of the collimation and protection systems used for the EDX are described in Part I. In Part II, a mathematical simulation of the heat, mass, and momentum transfer was performed for comparison to the EDX and vapor deposition results. The predicted flow patterns and evaporation rates are used to explain the differences between the two experimental methods. For the EDX spectra measured, the X-rays generated were from the center of the hearth where fluid flow rising from the bulk of the pool is sufficient to maintain the bulk composition despite the high evaporative flux from the surface. The flow moves radially outward from the center of the pool, with the volatile species being depleted. The vapor deposition technique measures the entire region, giving an average surface composition, and it therefore differs from the EDX results, which gave a near bulk composition. This combined study using in-situ EDX measurements and numerical simulations both provided an insight into the phenomena controlling the evaporation in an EB-heated system and demonstrated the viability of using EDX to measure the bulk composition during EB melting processes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Welding Techniques and Residual Stresses · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. M. Ritchie, P.D. Lee, A. Mitchell, S.L. Cockcroft, and T. Wang: Metall. Mater. Trans. B, 2003, vol. 34A, pp. 851–61.10.1007/s11661-003-0119-8 ↗
2. R.G. Ward: J. Iron Steel Inst., 1963, vol. 201, pp. 11–15.
3. J.P. Bellot, H. Duval, M. Ritchie, A. Mitchell, and D. Ablitzer: Proc. Int. Symp. on Liquid Metal Processing and Casting, A. Mitchell, L. Ridgway, and M. Baldwin, eds., AVS, Santa Fe, NM, 1999, pp. 90–100.
4. V.D. Sehgal and A. Mitchell: J. Iron Steel Inst., 1964, vol. 202, pp. 216–20.
5. G.A. Irons, C.W. Chang, R.I.L. Guthrie, and J. Szekely: Metall. Trans. B, 1978, vol. 9B, pp. 152–54.
6. T. Isawa, H. Nakamura, and K. Murakami: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 607–15.10.2355/isijinternational.32.607 ↗
7. Watakabe, K. Suzui, and K. Nishikawa: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 625–29.10.2355/isijinternational.32.625 ↗
8. A. Mitchell and K. Takagi: Proc. Vacuum Metallurgy, Pittsburgh, PA, June 11–13, 1983, G.K. Bhat, and L.W. Lherbier eds., ISS-AIME, Warrendale, PA, 1985, pp. 55–59.
9. P.D. Lee, R.M. Lothian, L.J. Hobbs, and M. McLean: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 435–42.
10. E.S. Machlin: Trans. AIME, 1960, vol. 218, pp. 314–26.
11. J. Herbertson and R. Harris: Electron Beam Remelting and Refining—State of the Art 1985, R. Bakish, ed., Bakish Materials Corp., Eaglewood, NJ, 1985, pp. 26–38.
12. T. Slatterly: Proc. Vacuum Metallurgy Conf., Atlanta, GA, Mar. 17–19, 1991, G.K. Bhat and L.W. Lherbier, eds., ISS, Warrendale, PA, 1992, pp. 53–61.
13. Vacuum Metallurgy, O. Winkler and R. Bakish, eds., Elsevier, New York, NY, 1971, p. 37.
14. K. Suzuki and S. Watakabe: Kawasaki Steel, Japan, private communication, 1998.
15. K.W. Westerberg, M.A. McClelland, and B.A. Finlayson: Electron Beam Remelting and Refining—State of the Art, R. Bakish, ed., Bakish Materials Corp., Eaglewood, NJ, 1993, pp. 153–65.
16. D. Ablitzer, M. Allibert, C. Avare, J.P. Bellot, Y. Bienvenu, Y. Fautrelle, P. Gillon, E. Hess, A. Jardy, and A. Pasturel: Electron Beam Remelting and Refining—State of the Art Conf., R. Bakish, ed., Bakish Materials Corp., Eaglewood, NJ, 1992, pp. 85–94.
17. P.D. Lee, P.N. Quested, and M. McLean: Phil. Trans. A, 1998, vol. 356, pp. 1027–43.10.1098/rsta.1998.0207 ↗
18. J.P. Bellot, E. Hess, and D. Ablitzer: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 845–54.10.1007/s11663-000-0121-0 ↗
19. R.F. Bunshah and R.S. Juntz: Trans. Vacuum Metall. Conf. 1966, M.A. Orehoski and R.F. Bunshah, American Vacuum Society, Boston, MA, 1966, pp. 209–39.
20. J.S. Sze and S.A. Self: Electron Beam Remelting and Refining—State of the Art 1989, R. Bakish, ed., Bakish Materials Corp., Eaglewood, NJ, 1989, pp. 2–20.
21. H. Nakamura and A. Mitchell: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 583–92.10.2355/isijinternational.32.583 ↗
22. B.R. Finke and G. Simon: J. Phys. D: Appl. Phys., 1990, vol. 23, pp. 67–74.10.1088/0022-3727/23/1/011 ↗
23. K. Takagi: Master’s Thesis, University of British Columbia, Vancouver, 1984.
24. M. Ritchie: Ph.D. Thesis, University of British Columbia, Vancouver 1998.
25. FLUENT User’s Guide, vol. 4., Fluent Inc., Sheffield, United Kingdom, 1996.
26. C. Hirsch: Numerical Computation of Internal and External Flows, John Wiley & Sons, New York, NY, 1988, vol. 1.
27. D.W. Tripp: Ph.D. Thesis, University of British Columbia, Vancouver 1996.
28. K.C. Mills: Imperial College, London, private communication, 1997.
29. M.J. McNallan and T. Debroy: Metall. Trans. B, 1991, vol. 22B, pp. 557–60.10.1007/BF02654294 ↗