High-Throughput Experiment and Numerical Simulation to Study Solidification Cracking in 2195 Aluminum Alloy Welds
Source abstract
Abstract
Solidification cracking during welding is a severe concern in aluminum alloys. Hot-cracking criteria have been successful in grading the crack susceptibility of an alloy. However, they do not offer a safe window of processing conditions for a crack-free weld. This work intends to determine the processing window for crack-free welding using a high-throughput experiment coupled with computer simulation. An experimental setup to produce a spiral welding path was developed to obtain a wide variation in heat input resulting in a range of cooling rates ((dot{T})) and temperature gradients (G) in a single experiment. Simulations using OpenFOAM® were performed to determine the spatial variation in (dot{T}) and G. A parametric space constructed using cooling rate and thermal gradient extracted from various points along the spiral path was used to map the regime for a crack-free weld. The results were validated using linear welds. The results were rationalized using microstructure evolution, and micro-segregation predicted using phase-field simulations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. W. Messler Jr.: Principles of Welding, Wiley, New York, 2007, pp. 373–453.
2. S. Kou: Welding Metallurgy, Wiley, New York, 2003, pp. 263–300.
3. B. Chalmers: Principles of Solidification, Wiley, New York, 1967.
4. J.C. Lippold: Weld. Metall. Weldability, 2014.
5. T. Zacharia: Weld. J., 1994, pp. 164–72.
6. Pellini W.S: Foundry, 1952, vol. 80, pp. 125–33.
7. T.W. Clyne and G.J. Davies: The Metals Society, London, 1979, pp. 275–78.
8. N.N. Prokhorov: Russ. Cast. Prod., 1962, vol. 2, pp. 172–75.
9. K. Nakata and F. Matsuda: Trans. JWRI., 1995, vol. 24(1), pp. 83–94.
10. N.N. Prokhorov and N.N. Prokhorov: J. Japan Weld. Soc., 1971, pp. 109–17.
11. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
12. N. Coniglio and C.E. Cross: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 2718–28.10.1007/s11661-009-9964-4 ↗
13. S. Kou: Acta Mater.https://doi.org/10.1016/j.actamat.2015.01.034.10.1016/j.actamat.2015.01.034 ↗
14. J. Liu and S. Kou: Acta Mater. https://doi.org/10.1016/j.actamat.2016.03.030.10.1016/j.actamat.2016.03.030 ↗
15. J. Liu and S. Kou: Acta Mater. https://doi.org/10.1016/j.actamat.2016.12.028.10.1016/j.actamat.2016.12.028 ↗
16. D.G. Eskin and L. Katgerman: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 1511–19.10.1007/s11661-007-9169-7 ↗
17. R.J. Rioja and J. Liu: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2012, vol. 43, pp. 3325–37.10.1007/s11661-012-1155-z ↗
18. A. Kostrivas and J.C. Lippold: Int. Mater. Rev., 1999, vol. 44, pp. 217–37.10.1179/095066099101528289 ↗
19. M. Agilan, G. Phanikumar, and D. Sivakumar: Trans. Indian Inst. Met., 2018, vol. 71, pp. 2667–70.10.1007/s12666-018-1425-6 ↗
20. M. Sheikhi, F. Malek Ghaini, and H. Assadi: Acta Mater. https://doi.org/10.1016/j.actamat.2014.09.002.10.1016/j.actamat.2014.09.002 ↗
21. W. Zhang, G.G. Roy, J.W. Elmer, and T. DebRoy: J. Appl. Phys., 2003, vol. 93, pp. 3022–33.10.1063/1.1540744 ↗
22. J. Goldak, A. Chakravarti, and M. Bibby: Metall. Trans. B., 1984, vol. 15B, pp. 299–305.10.1007/BF02667333 ↗
23. N. Nguyen, O. A, M. K, S. N, and M. Y: Weld. J., 1999, vol. August, pp. 265s-274s.
24. ASM Handbook - Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, Volume 2., ASM International, 1990.
25. E.A. Starke: in Aluminum-Lithium Alloys: Processing, Properties, and Applications, N. Eswara Prasad, A.A. Gokhale, and R.J.H. Wanhill, eds., Butterworth-Heinemann, 2013, pp. 3–26.
26. M.R. Rahul and G. Phanikumar: J. Alloys Compd., 2020, vol. 815, p. 152334.10.1016/j.jallcom.2019.152334 ↗
27. I. Steinbach: Model. Simul. Mater. Sci. Eng. https://doi.org/10.1088/0965-0393/17/7/073001.10.1088/0965-0393/17/7/073001 ↗
28. J. Eiken: IOP Conf. Ser. Mater. Sci. Eng. https://doi.org/10.1088/1757-899X/33/1/012105.10.1088/1757-899X/33/1/012105 ↗
29. N. Coniglio and C.E. Cross: Int. J. Adv. Manuf. Technol., 2020, vol. 107, pp. 5025–38.10.1007/s00170-020-05232-x ↗
30. P. Schempp, C.E. Cross, A. Pittner, G. Oder, R.S. Neumann, H. Rooch, I. Dörfel, W. Österle, and M. Rethmeier: Weld. J., 2014, vol. 93, pp. 53–59.
31. S.A. David and J.M. Vitek: Int. Mater. Rev., 1989, vol. 34, pp. 213–45.10.1179/imr.1989.34.1.213 ↗
32. S.A. David, S.S. Babu, and J.M. Vitek: JOM., 2003, vol. 55, pp. 14–20.10.1007/s11837-003-0134-7 ↗
33. N. Coniglio and C.E. Cross: Int. Mater. Rev., 2013, vol. 58, pp. 375–97.10.1179/1743280413Y.0000000020 ↗
34. Dickhaus C.H, L. Ohm, and S. Engler: Trans. Am. Foundry Soc., 1994, pp. 677–84.
35. M. Braccini, C.L. Martin, M. Suéry, and Y. Bréchet: Matériaux Tech., https://doi.org/10.1051/mattech/200088050019.10.1051/mattech/200088050019 ↗
36. Z. Tang and F. Vollertsen: Weld. World., 2014, vol. 58, pp. 355–66.10.1007/s40194-014-0121-3 ↗
37. A.E. Gutierrez and J.C. Lippold: Weld. J., 1998, vol. 77, p. 123.
38. A.D. Kostrivas and J.C. Lippold: JOM., 2004, vol. 56, pp. 65–72.10.1007/s11837-004-0149-8 ↗
39. L. Wang, N. Wang, and N. Provatas: Acta Mater., 2017, vol. 126, pp. 302–12.10.1016/j.actamat.2016.11.058 ↗
40. L. Wang and K. Wang: J. Manuf. Process., 2019, vol. 48, pp. 191–98.10.1016/j.jmapro.2019.11.010 ↗
41. S. Sandhya, R. Mahemaa, and G. Phanikumar: Procedia. Mater. Sci., 2014, vol. 5, pp. 408–15.
42. A. Hekmat-Ardakan, E.M. Elgallad, F. Ajersch, and X.-G. Chen: Mater. Sci. Eng. A., 2012, vol. 558, pp. 76–81.10.1016/j.msea.2012.07.075 ↗
43. P. Jiang, S. Geng, X. Shao, G. Mi, C. Wang, H. Wu, C. Han, and S. Gao: JOM., 2019, vol. 71, pp. 3223–29.10.1007/s11837-019-03342-w ↗